[Freedreno] [PATCH v3 4/6] drm/msm/dp: Enable downspread for supported DP sinks

[Sankeerth Billakanti]

The sc7280 eDP sink that supports downspread will fail link training
if source does not enable SSC / downspread. This change will set the
downspread bit in the DP sink if supported and indicate SSC support
to the DP PHY driver.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka at quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 62e75dc..a40e798 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1228,7 +1228,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 			int *training_step)
 {
 	int ret = 0;
+	const u8 *dpcd = ctrl->panel->dpcd;
 	u8 encoding = DP_SET_ANSI_8B10B;
+	u8 ssc;
 	struct dp_link_info link_info = {0};
 
 	dp_ctrl_config_ctrl(ctrl);
@@ -1238,6 +1240,12 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 	link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING;
 
 	dp_aux_link_configure(ctrl->aux, &link_info);
+
+	if (drm_dp_max_downspread(dpcd)) {
+		ssc = DP_SPREAD_AMP_0_5;
+		drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1);
+	}
+
 	drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
 				&encoding, 1);
 
@@ -1312,9 +1320,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
 	struct dp_io *dp_io = &ctrl->parser->io;
 	struct phy *phy = dp_io->phy;
 	struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	opts_dp->lanes = ctrl->link->link_params.num_lanes;
 	opts_dp->link_rate = ctrl->link->link_params.rate / 100;
+	opts_dp->ssc = drm_dp_max_downspread(dpcd);
 	dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link",
 					ctrl->link->link_params.rate * 1000);
 
@@ -1406,7 +1416,7 @@ void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
 
 static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
 {
-	u8 *dpcd = ctrl->panel->dpcd;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	/*
 	 * For better interop experience, used a fixed NVID=0x8000
-- 
2.7.4