[Freedreno] [PATCH 3/3] dt-bindings: display: msm: Add binding for msm8998 dpu

[Rob Herring]

On Wed, Sep 01, 2021 at 08:11:38PM +0200, AngeloGioacchino Del Regno wrote:
> Add yaml binding for msm8998 dpu1 support.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at somainline.org>
> ---
>  .../bindings/display/msm/dpu-msm8998.yaml     | 220 ++++++++++++++++++
>  1 file changed, 220 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
> new file mode 100644
> index 000000000000..db435342ecbf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
> @@ -0,0 +1,220 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DPU dt properties for MSM8998 target
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno at somainline.org>
> +
> +description: |
> +  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
> +  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> +  bindings of MDSS and DPU are mentioned for MSM8998 target.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,msm8998-mdss
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    const: mdss
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Display AHB clock
> +      - description: Display AXI clock
> +      - description: Display core clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: bus
> +      - const: core
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#address-cells": true
> +
> +  "#size-cells": true
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  iommus:
> +    items:
> +      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
> +
> +  ranges: true
> +
> +patternProperties:
> +  "^display-controller@[0-9a-f]+$":
> +    type: object
> +    description: Node containing the properties of DPU.
> +
> +    properties:
> +      compatible:
> +        items:
> +          - const: qcom,msm8998-dpu
> +
> +      reg:
> +        items:
> +          - description: Address offset and size for mdp register set
> +          - description: Address offset and size for regdma register set
> +          - description: Address offset and size for vbif register set
> +          - description: Address offset and size for non-realtime vbif register set
> +
> +      reg-names:
> +        items:
> +          - const: mdp
> +          - const: regdma
> +          - const: vbif
> +          - const: vbif_nrt
> +
> +      clocks:
> +        items:
> +          - description: Display ahb clock
> +          - description: Display axi clock
> +          - description: Display mem-noc clock
> +          - description: Display core clock
> +          - description: Display vsync clock
> +
> +      clock-names:
> +        items:
> +          - const: iface
> +          - const: bus
> +          - const: mnoc
> +          - const: core
> +          - const: vsync
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      power-domains:
> +        maxItems: 1
> +
> +      operating-points-v2: true
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +        description: |
> +          Contains the list of output ports from DPU device. These ports
> +          connect to interfaces that are external to the DPU hardware,
> +          such as DSI, DP etc. Each output port contains an endpoint that
> +          describes how it is connected to an external interface.
> +
> +        properties:
> +          port at 0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: DPU_INTF1 (DSI1)
> +
> +          port at 1:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: DPU_INTF2 (DSI2)
> +
> +        required:
> +          - port at 0
> +          - port at 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - reg-names
> +      - clocks
> +      - interrupts
> +      - power-domains
> +      - operating-points-v2
> +      - ports
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - power-domains
> +  - clocks
> +  - interrupts
> +  - interrupt-controller
> +  - iommus
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    display-subsystem at c900000 {
> +        compatible = "qcom,msm8998-mdss";
> +        reg = <0x0c900000 0x1000>;
> +        reg-names = "mdss";
> +
> +        clocks = <&mmcc MDSS_AHB_CLK>,
> +                 <&mmcc MDSS_AXI_CLK>,
> +                 <&mmcc MDSS_MDP_CLK>;
> +        clock-names = "iface", "bus", "core";
> +
> +        #address-cells = <1>;
> +        #interrupt-cells = <1>;
> +        #size-cells = <1>;
> +
> +        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-controller;
> +        iommus = <&mmss_smmu 0>;
> +
> +        power-domains = <&mmcc MDSS_GDSC>;
> +        ranges;
> +        status = "disabled";

Drop. Why disable an example?

> +
> +        display-controller at c901000 {
> +            compatible = "qcom,msm8998-dpu";
> +            reg = <0x0c901000 0x8f000>,
> +                  <0x0c9a8e00 0xf0>,
> +                  <0x0c9b0000 0x2008>,
> +                  <0x0c9b8000 0x1040>;
> +            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
> +
> +            clocks = <&mmcc MDSS_AHB_CLK>,
> +                     <&mmcc MDSS_AXI_CLK>,
> +                     <&mmcc MNOC_AHB_CLK>,
> +                     <&mmcc MDSS_MDP_CLK>,
> +                     <&mmcc MDSS_VSYNC_CLK>;
> +            clock-names = "iface", "bus", "mnoc", "core", "vsync";
> +
> +            interrupt-parent = <&mdss>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +            operating-points-v2 = <&mdp_opp_table>;
> +            power-domains = <&rpmpd MSM8998_VDDMX>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port at 0 {
> +                    reg = <0>;
> +                    dpu_intf1_out: endpoint {
> +                        remote-endpoint = <&dsi0_in>;
> +                    };
> +                };
> +
> +                port at 1 {
> +                    reg = <1>;
> +                    dpu_intf2_out: endpoint {
> +                        remote-endpoint = <&dsi1_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.32.0
> 
>