[Freedreno] [PATCH v2 00/22] drm/msm/dpu: switch dpu_plane to be virtual

[abhinavk at codeaurora.org]

Hi Dmitry

On 2021-07-04 18:20, Dmitry Baryshkov wrote:
> As discussed on IRC, change dpu_plane implementation to be virtual:
> register unified planes and select backing SSPP block at runtime.
> 
> Use msm.dpu_use_virtual_planes=1 to enable usage of virtual planes
> rather than statically allocated SSPPs at the plane registration.
> 
> Patches 1-9 move state variables from struct dpu_plane onto the stack
> allocation. State should not be a part of struct dpu_plane anyway.
> 
> Patches 10-18 make additional changes to plane code, reworking check,
> debugfs, dropping old multirec support, which results in patch 19 
> adding
> support for virtual planes per se.
> 
> Patches 20-22 demonstrate my main goal behind reworking dpu_plane
> support. They change dpu_plane to automatically use one of SSPP block
> features - multirec, an ability to display two unscaled RGB rectangles
> using single SSPP block. This allows us to double the amount of created
> planes. If the user tries to enable more planes than actually supported
> by the underlying SSPP blocks, atomic_check code would return an error.
> 
> As you can see, this patchset is not atomic, so different patches can 
> go
> separately.

I am half way through this series and have finished checking patches 
1-12
I am okay with patches 1-4, 6-12. Its a reasonable cleanup to make the 
dpu_plane struct lighter.
I need a little more time with the rest as I am comparing the downstream 
solution against yours.

As you mentioned, this patchset is not atomic, hence can you break it up 
like
-> cleanup of dpu_plane struct in one series
-> removal of current multirect and current src split which will include 
patch 5 as well

So that the first series can go through and it gives us a little more 
time to check the second
series.

Thanks

Abhinav

> 
> Changes since v1:
>  - Add multirec implementation
>  - Added msm.dpu_use_virtual_planes kernel parameter instead of using
>    compile time switch
>  - Changed code to always reallocate SSPPs in the CRTC atomic check to
>    let the kernel pick up the best multirec config. This can be
>    optimized later.
>  - Rework RM SSPP API to always receive plane id
>  - Removed scaler_cfg, pixel_ext and cdp_cfg from struct 
> dpu_plane_state
>  - Made _dpu_scaler_setup() call sspp's setup_scaler and setup_pe
>  - Removed dpu_csc_cfg from dpu_plane
> 
> The following changes since commit 
> e88bbc91849b2bf57683119c339e52916d34433f:
> 
>   Revert "drm/msm/mdp5: provide dynamic bandwidth management"
> (2021-06-23 14:06:20 -0700)
> 
> are available in the Git repository at:
> 
>   https://git.linaro.org/people/dmitry.baryshkov/kernel.git 
> dpu-multirec-2
> 
> for you to fetch changes up to 
> 19f6afd40097d4c826e56b8f4a8cbd807f7b61f6:
> 
>   drm/msm/dpu: add multirect support (2021-07-05 04:04:50 +0300)
> 
> ----------------------------------------------------------------
> Dmitry Baryshkov (22):
>       drm/msm/dpu: move LUT levels out of QOS config
>       drm/msm/dpu: remove pipe_qos_cfg from struct dpu_plane
>       drm/msm/dpu: drop pipe_name from struct dpu_plane
>       drm/msm/dpu: remove stage_cfg from struct dpu_crtc
>       drm/msm/dpu: rip out master planes support
>       drm/msm/dpu: move dpu_hw_pipe_cfg out of struct dpu_plane
>       drm/msm/dpu: drop scaler config from plane state
>       drm/msm/dpu: drop dpu_csc_cfg from dpu_plane
>       drm/msm/dpu: remove dpu_hw_pipe_cdp_cfg from dpu_plane
>       drm/msm/dpu: don't cache pipe->cap->features in dpu_plane
>       drm/msm/dpu: don't cache pipe->cap->sblk in dpu_plane
>       drm/msm/dpu: rip out debugfs support from dpu_plane
>       drm/msm/dpu: drop src_split and multirect check from 
> dpu_crtc_atomic_check
>       drm/msm/dpu: add list of supported formats to the DPU caps
>       drm/msm/dpu: simplify DPU_SSPP features checks
>       drm/msm/dpu: do not limit the zpos property
>       drm/msm/dpu: add support for SSPP allocation to RM
>       drm/msm/dpu: move pipe_hw to dpu_plane_state
>       drm/msm/dpu: add support for virtualized planes
>       drm/msm/dpu: fix smart dma support
>       drm/msm/dpu: fix CDP setup to account for multirect index
>       drm/msm/dpu: add multirect support
> 
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c       | 261 +++-----
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h       |   2 -
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  20 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  20 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c    |  41 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h    |  52 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c    |   2 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h    |   2 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c        | 234 ++++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h        |  70 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      | 851 
> +++++++++++--------------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h      |  75 +--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |  81 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h         |   6 +
>  14 files changed, 793 insertions(+), 924 deletions(-)
> 
> _______________________________________________
> Freedreno mailing list
> Freedreno at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/freedreno