[Freedreno] [PATCH v1 2/4] arm64: dts: qcom: sc7280: add display dt nodes

[mkrishn at codeaurora.org]

On 2021-08-19 01:27, Stephen Boyd wrote:
> Quoting Krishna Manikandan (2021-08-18 03:27:02)
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 53a21d0..fd7ff1c 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -5,6 +5,7 @@
>>   * Copyright (c) 2020-2021, The Linux Foundation. All rights 
>> reserved.
>>   */
>> 
>> +#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
>>  #include <dt-bindings/clock/qcom,gcc-sc7280.h>
>>  #include <dt-bindings/clock/qcom,rpmh.h>
>>  #include <dt-bindings/interconnect/qcom,sc7280.h>
>> @@ -1424,6 +1425,90 @@
>>                         #power-domain-cells = <1>;
>>                 };
>> 
>> +               mdss: mdss at ae00000 {
> 
> subsystem at ae00000
> 
>> +                       compatible = "qcom,sc7280-mdss";
>> +                       reg = <0 0x0ae00000 0 0x1000>;
>> +                       reg-names = "mdss";
>> +
>> +                       power-domains = <&dispcc 
>> DISP_CC_MDSS_CORE_GDSC>;
>> +
>> +                       clocks = <&gcc GCC_DISP_AHB_CLK>,
>> +                                <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> +                               <&dispcc DISP_CC_MDSS_MDP_CLK>;
>> +                       clock-names = "iface", "ahb", "core";
>> +
>> +                       assigned-clocks = <&dispcc 
>> DISP_CC_MDSS_MDP_CLK>;
>> +                       assigned-clock-rates = <300000000>;
>> +
>> +                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-controller;
>> +                       #interrupt-cells = <1>;
>> +
>> +                       interconnects = <&mmss_noc MASTER_MDP0 0 
>> &mc_virt SLAVE_EBI1 0>;
>> +                       interconnect-names = "mdp0-mem";
>> +
>> +                       iommus = <&apps_smmu 0x900 0x402>;
>> +
>> +                       #address-cells = <2>;
>> +                       #size-cells = <2>;
>> +                       ranges;
>> +
>> +                       status = "disabled";
>> +
>> +                       mdp: mdp at ae01000 {
> 
> display-controller at ae01000

Stephen,
    In the current driver code, there is a substring comparison for "mdp" 
in device node name as part of probe sequence. If "mdp" is not present 
in the node name, it will
    return an error resulting in probe failure. Can we continue using mdp 
as nodename instead of display controller?

Thanks,
Krishna


> 
>> +                               compatible = "qcom,sc7280-dpu";
>> +                               reg = <0 0x0ae01000 0 0x8f030>,
>> +                                       <0 0x0aeb0000 0 0x2008>;
>> +                               reg-names = "mdp", "vbif";
>> +
>> +                               clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
>> +                                       <&gcc GCC_DISP_SF_AXI_CLK>,
>> +                                       <&dispcc 
>> DISP_CC_MDSS_AHB_CLK>,
>> +                                       <&dispcc 
>> DISP_CC_MDSS_MDP_LUT_CLK>,
>> +                                       <&dispcc 
>> DISP_CC_MDSS_MDP_CLK>,
>> +                                       <&dispcc 
>> DISP_CC_MDSS_VSYNC_CLK>;
>> +                               clock-names = "bus", "nrt_bus", 
>> "iface", "lut", "core",
>> +                                             "vsync";
> 
> One line per string please.
> 
>> +                               assigned-clocks = <&dispcc 
>> DISP_CC_MDSS_MDP_CLK>,
>> +                                               <&dispcc 
>> DISP_CC_MDSS_VSYNC_CLK>,
>> +                                               <&dispcc 
>> DISP_CC_MDSS_AHB_CLK>;
>> +                               assigned-clock-rates = <300000000>,
>> +                                                       <19200000>,
>> +                                                       <19200000>;
>> +                               operating-points-v2 = 
>> <&mdp_opp_table>;
>> +                               power-domains = <&rpmhpd SC7280_CX>;
>> +
>> +                               interrupt-parent = <&mdss>;
>> +                               interrupts = <0>;
>> +
>> +                               status = "disabled";
>> +
>> +                               mdp_opp_table: mdp-opp-table {
> 
> mdp_opp_table: opp-table {
> 
>> +                                       compatible = 
>> "operating-points-v2";
>> +
>> +                                       opp-200000000 {
>> +                                               opp-hz = /bits/ 64 
>> <200000000>;
>> +                                               required-opps = 
>> <&rpmhpd_opp_low_svs>;
>> +                                       };
>> +
>> +                                       opp-300000000 {
>> +                                               opp-hz = /bits/ 64 
>> <300000000>;
>> +                                               required-opps = 
>> <&rpmhpd_opp_svs>;
>> +                                       };
>> +
>> +                                       opp-380000000 {
>> +                                               opp-hz = /bits/ 64 
>> <380000000>;
>> +                                               required-opps = 
>> <&rpmhpd_opp_svs_l1>;
>> +                                       };
>> +
>> +                                       opp-506666667 {
>> +                                               opp-hz = /bits/ 64 
>> <506666667>;
>> +                                               required-opps = 
>> <&rpmhpd_opp_nom>;
>> +                                       };
>> +                               };
>> +                       };
>> +               };
>> +