[Freedreno] [PATCH 08/12] drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback
Abhinav Kumar
quic_abhinavk at quicinc.com
Thu Apr 14 22:16:52 UTC 2022
On 2/4/2022 3:19 PM, Dmitry Baryshkov wrote:
> On 05/02/2022 00:17, Abhinav Kumar wrote:
>> Introduce the dpu_encoder_phys_* for the writeback interface
>> to handle writeback specific hardware programming.
>>
>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>
> Mostly looks ok, see minor comments bellow.
>
>> ---
>> drivers/gpu/drm/msm/Makefile | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 36 +-
>> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 813
>> +++++++++++++++++++++
>> 3 files changed, 849 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index c43ef35..3abaf84 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -53,6 +53,7 @@ msm-y := \
>> disp/dpu1/dpu_encoder.o \
>> disp/dpu1/dpu_encoder_phys_cmd.o \
>> disp/dpu1/dpu_encoder_phys_vid.o \
>> + disp/dpu1/dpu_encoder_phys_wb.o \
>> disp/dpu1/dpu_formats.o \
>> disp/dpu1/dpu_hw_catalog.o \
>> disp/dpu1/dpu_hw_ctl.o \
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> index 7b3354d..80da0a9 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> @@ -159,6 +159,7 @@ struct dpu_encoder_phys_ops {
>> * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel
>> * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel
>> * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel
>> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector
>> */
>> enum dpu_intr_idx {
>> INTR_IDX_VSYNC,
>> @@ -166,6 +167,7 @@ enum dpu_intr_idx {
>> INTR_IDX_UNDERRUN,
>> INTR_IDX_CTL_START,
>> INTR_IDX_RDPTR,
>> + INTR_IDX_WB_DONE,
>> INTR_IDX_MAX,
>> };
>> @@ -196,7 +198,7 @@ struct dpu_encoder_irq {
>> * @hw_ctl: Hardware interface to the ctl registers
>> * @hw_pp: Hardware interface to the ping pong registers
>> * @hw_intf: Hardware interface to the intf registers
>> - * @hw_wb: Hardware interface to the wb registers
>> + * @hw_wb: Hardware interface to the wb registers
>> * @dpu_kms: Pointer to the dpu_kms top level
>> * @cached_mode: DRM mode cached at mode_set time, acted on in
>> enable
>> * @enabled: Whether the encoder has enabled and running a mode
>> @@ -250,6 +252,31 @@ static inline int
>> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
>> }
>> /**
>> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to
>> handle command
>> + * mode specific operations
>> + * @base: Baseclass physical encoder structure
>> + * @wbirq_refcount: Reference count of writeback interrupt
>> + * @wb_done_timeout_cnt: number of wb done irq timeout errors
>> + * @wb_cfg: writeback block config to store fb related details
>> + * @cdp_cfg: chroma down prefetch block config for wb
>> + * @aspace: address space to be used for wb framebuffer
>> + * @wb_conn: backpointer to writeback connector
>> + * @wb_job: backpointer to current writeback job
>> + * @dest: dpu buffer layout for current writeback output buffer
>> + */
>> +struct dpu_encoder_phys_wb {
>> + struct dpu_encoder_phys base;
>> + atomic_t wbirq_refcount;
>> + int wb_done_timeout_cnt;
>> + struct dpu_hw_wb_cfg wb_cfg;
>> + struct dpu_hw_wb_cdp_cfg cdp_cfg;
>
> What about moving them to the stack rather storing them in the structure?
Yes cdp_cfg can be moved to the stack. Will do it in the next version.
wb_cfg cannot because for drm_wb, prepare_wb_job has the job's fb
attributes which are used to setup the wb.
But we commit it only in the encoder_kickoff in
dpu_encoder_phys_wb_setup_fb().
So its shared across two methods.
>
>> + struct msm_gem_address_space *aspace;
>> + struct drm_writeback_connector *wb_conn;
>> + struct drm_writeback_job *wb_job;
>> + struct dpu_hw_fmt_layout dest;
>> +};
>> +
>> +/**
>> * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to
>> handle command
>> * mode specific operations
>> * @base: Baseclass physical encoder structure
>> @@ -317,6 +344,13 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
>> struct dpu_enc_phys_init_params *p);
>> /**
>> + * dpu_encoder_phys_wb_init - initialize writeback encoder
>> + * @init: Pointer to init info structure with initialization params
>> + */
>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
>> + struct dpu_enc_phys_init_params *p);
>> +
>> +/**
>> * dpu_encoder_helper_trigger_start - control start helper function
>> * This helper function may be optionally specified by physical
>> * encoders if they require ctl_start triggering.
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> new file mode 100644
>> index 0000000..783f83e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> @@ -0,0 +1,813 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + */
>> +
>> +#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__
>> +
>> +#include <linux/debugfs.h>
>
> the header is unused
ack
>
>> +
>> +#include "dpu_encoder_phys.h"
>> +#include "dpu_formats.h"
>> +#include "dpu_hw_top.h"
>> +#include "dpu_hw_wb.h"
>> +#include "dpu_hw_lm.h"
>> +#include "dpu_hw_blk.h"
>> +#include "dpu_hw_merge3d.h"
>> +#include "dpu_hw_interrupts.h"
>> +#include "dpu_core_irq.h"
>> +#include "dpu_vbif.h"
>> +#include "dpu_crtc.h"
>> +#include "disp/msm_disp_snapshot.h"
>> +
>> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048
>> +
>> +#define to_dpu_encoder_phys_wb(x) \
>> + container_of(x, struct dpu_encoder_phys_wb, base)
>> +
>> +/**
>> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder
>> + */
>> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + return true;
>> +}
>
> A comment that there is only one physical enc for WB would be helpful
> here. But maybe we should just pull a generic is_master into
> dpu_encoder_phys.h (it would work here too).
I am just following what we have today for phys_vid and phys_cmd.
But yes, I can leave a comment for sure.
>
>> +
>> +/**
>> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback
>> interface
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_set_ot_limit(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>> + struct dpu_vbif_set_ot_params ot_params;
>> +
>> + memset(&ot_params, 0, sizeof(ot_params));
>> + ot_params.xin_id = hw_wb->caps->xin_id;
>> + ot_params.num = hw_wb->idx - WB_0;
>> + ot_params.width = phys_enc->cached_mode.hdisplay;
>> + ot_params.height = phys_enc->cached_mode.vdisplay;
>> + ot_params.is_wfd = true;
>> + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode);
>> + ot_params.vbif_idx = hw_wb->caps->vbif_idx;
>> + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>> + ot_params.rd = false;
>> +
>> + dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_set_qos_remap(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb;
>> + struct dpu_vbif_set_qos_params qos_params;
>> +
>> + if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) {
>> + DPU_ERROR("invalid arguments\n");
>> + return;
>> + }
>> +
>> + if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) {
>> + DPU_ERROR("invalid writeback hardware\n");
>> + return;
>> + }
>> +
>> + hw_wb = phys_enc->hw_wb;
>> +
>> + memset(&qos_params, 0, sizeof(qos_params));
>> + qos_params.vbif_idx = hw_wb->caps->vbif_idx;
>> + qos_params.xin_id = hw_wb->caps->xin_id;
>> + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>> + qos_params.num = hw_wb->idx - WB_0;
>> + qos_params.is_rt = false;
>> +
>> + DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n",
>> + qos_params.num,
>> + qos_params.vbif_idx,
>> + qos_params.xin_id, qos_params.is_rt);
>> +
>> + dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params);
>> +}
>> +
>> +//this can be moved to some common file?
>
> C99 comment and missing "FIXME: " :-D
Yes I will remove this since i am addressing this now.
>
> Yes, let's pull it into dpu_hw_util.c
>
> And if you (by chance) would see a value in unifying other
> QoS/CDP-related functions let's move them to the dpu_hw_util.c too.
Yes I think I can move some utility functions like below to the util
file. Will take care of it in next version.
>
>> +static u64 _dpu_encoder_phys_wb_get_qos_lut(struct dpu_qos_lut_tbl *tbl,
>> + u32 total_fl)
>> +{
>> + int i;
>> +
>> + if (!tbl || !tbl->nentry || !tbl->entries)
>> + return 0;
>> +
>> + for (i = 0; i < tbl->nentry; i++)
>> + if (total_fl <= tbl->entries[i].fl)
>> + return tbl->entries[i].lut;
>> +
>> + /* if last fl is zero, use as default */
>> + if (!tbl->entries[i-1].fl)
>> + return tbl->entries[i-1].lut;
>> +
>> + return 0;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for writeback
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb;
>> + struct dpu_hw_wb_qos_cfg qos_cfg;
>> + struct dpu_mdss_cfg *catalog;
>> + struct dpu_qos_lut_tbl *qos_lut_tb;
>> +
>> + if (!phys_enc || !phys_enc->dpu_kms ||
>> !phys_enc->dpu_kms->catalog) {
>> + DPU_ERROR("invalid parameter(s)\n");
>> + return;
>> + }
>> +
>> + catalog = phys_enc->dpu_kms->catalog;
>> +
>> + hw_wb = phys_enc->hw_wb;
>> +
>> + memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg));
>> + qos_cfg.danger_safe_en = true;
>> + qos_cfg.danger_lut =
>> + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>> +
>> + qos_cfg.safe_lut =
>> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>> +
>> + qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>> + qos_cfg.creq_lut = _dpu_encoder_phys_wb_get_qos_lut(qos_lut_tb, 0);
>> +
>> + if (hw_wb->ops.setup_qos_lut)
>> + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer
>> + * @phys_enc: Pointer to physical encoder
>> + * @fb: Pointer to output framebuffer
>> + * @wb_roi: Pointer to output region of interest
>> + */
>> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys
>> *phys_enc,
>> + struct drm_framebuffer *fb)
>> +{
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> + struct dpu_hw_wb *hw_wb;
>> + struct dpu_hw_wb_cfg *wb_cfg;
>> + struct dpu_hw_wb_cdp_cfg *cdp_cfg;
>> +
>> + if (!phys_enc || !phys_enc->dpu_kms ||
>> !phys_enc->dpu_kms->catalog ||
>> + !phys_enc->connector) {
>> + DPU_ERROR("invalid encoder\n");
>> + return;
>> + }
>> +
>> + hw_wb = phys_enc->hw_wb;
>> + wb_cfg = &wb_enc->wb_cfg;
>> + cdp_cfg = &wb_enc->cdp_cfg;
>> +
>> + wb_cfg->intf_mode = phys_enc->intf_mode;
>> + wb_cfg->roi.x1 = 0;
>> + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay;
>> + wb_cfg->roi.y1 = 0;
>> + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay;
>> +
>> + if (hw_wb->ops.setup_roi)
>> + hw_wb->ops.setup_roi(hw_wb, wb_cfg);
>> +
>> + if (hw_wb->ops.setup_outformat)
>> + hw_wb->ops.setup_outformat(hw_wb, wb_cfg);
>> +
>> + if (hw_wb->ops.setup_cdp) {
>> + memset(cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg));
>> +
>> + cdp_cfg->enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg
>> + [DPU_PERF_CDP_USAGE_NRT].wr_enable;
>> + cdp_cfg->ubwc_meta_enable =
>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format);
>> + cdp_cfg->tile_amortize_enable =
>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) ||
>> + DPU_FORMAT_IS_TILE(wb_cfg->dest.format);
>> + cdp_cfg->preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64;
>> +
>> + hw_wb->ops.setup_cdp(hw_wb, cdp_cfg);
>> + }
>> +
>> + if (hw_wb->ops.setup_outaddress)
>> + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block
>> + * @phys_enc:Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb;
>> + struct dpu_hw_ctl *ctl;
>> +
>> + if (!phys_enc) {
>> + DPU_ERROR("invalid encoder\n");
>> + return;
>> + }
>> +
>> + hw_wb = phys_enc->hw_wb;
>> + ctl = phys_enc->hw_ctl;
>> +
>> + if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) &&
>> + (phys_enc->hw_ctl &&
>> + phys_enc->hw_ctl->ops.setup_intf_cfg)) {
>> + struct dpu_hw_intf_cfg intf_cfg = {0};
>> + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp;
>> + enum dpu_3d_blend_mode mode_3d;
>> +
>> + mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>> +
>> + intf_cfg.intf = DPU_NONE;
>> + intf_cfg.wb = hw_wb->idx;
>> +
>> + if (mode_3d && hw_pp && hw_pp->merge_3d)
>> + intf_cfg.merge_3d = hw_pp->merge_3d->idx;
>> +
>> + if (phys_enc->hw_pp->merge_3d &&
>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode)
>> +
>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d,
>> + mode_3d);
>> +
>> + /* setup which pp blk will connect to this wb */
>> + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk)
>> + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb,
>> true,
>> + phys_enc->hw_pp->idx);
>> +
>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl,
>> + &intf_cfg, true);
>> + } else if (phys_enc->hw_ctl &&
>> phys_enc->hw_ctl->ops.setup_intf_cfg) {
>> + struct dpu_hw_intf_cfg intf_cfg = {0};
>> +
>> + intf_cfg.intf = DPU_NONE;
>> + intf_cfg.wb = hw_wb->idx;
>> + intf_cfg.mode_3d =
>> + dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl,
>> &intf_cfg, true);
>> + }
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic
>> states
>> + * @phys_enc: Pointer to physical encoder
>> + * @crtc_state: Pointer to CRTC atomic state
>> + * @conn_state: Pointer to connector atomic state
>> + */
>> +static int dpu_encoder_phys_wb_atomic_check(
>> + struct dpu_encoder_phys *phys_enc,
>> + struct drm_crtc_state *crtc_state,
>> + struct drm_connector_state *conn_state)
>> +{
>> + struct drm_framebuffer *fb;
>> + const struct drm_display_mode *mode;
>> +
>> + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n",
>> + phys_enc->intf_idx, mode->name, mode->hdisplay,
>> mode->vdisplay);
>> +
>> + if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
>> + return 0;
>> +
>> + fb = conn_state->writeback_job->fb;
>> + mode = &crtc_state->mode;
>> +
>> + if (!conn_state || !conn_state->connector) {
>> + DPU_ERROR("invalid connector state\n");
>> + return -EINVAL;
>> + } else if (conn_state->connector->status !=
>> + connector_status_connected) {
>> + DPU_ERROR("connector not connected %d\n",
>> + conn_state->connector->status);
>> + return -EINVAL;
>> + }
>> +
>> + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id,
>> + fb->width, fb->height);
>> +
>> + if (fb->width != mode->hdisplay) {
>> + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width,
>> + mode->hdisplay);
>> + return -EINVAL;
>> + } else if (fb->height != mode->vdisplay) {
>> + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height,
>> + mode->vdisplay);
>> + return -EINVAL;
>> + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) {
>> + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n",
>> + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +
>> +/**
>> + * _dpu_encoder_phys_wb_update_flush - flush hardware update
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb;
>> + struct dpu_hw_ctl *hw_ctl;
>> + struct dpu_hw_pingpong *hw_pp;
>> + u32 pending_flush = 0;
>> +
>> + if (!phys_enc)
>> + return;
>> +
>> + hw_wb = phys_enc->hw_wb;
>> + hw_pp = phys_enc->hw_pp;
>> + hw_ctl = phys_enc->hw_ctl;
>> +
>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>> +
>> + if (!hw_ctl) {
>> + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0);
>> + return;
>> + }
>> +
>> + if (hw_ctl->ops.update_pending_flush_wb)
>> + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx);
>> +
>> + if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp &&
>> hw_pp->merge_3d)
>> + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl,
>> + hw_pp->merge_3d->idx);
>> +
>> + if (hw_ctl->ops.get_pending_flush)
>> + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl);
>> +
>> + DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n",
>> + hw_ctl->idx - CTL_0, pending_flush,
>> + hw_wb->idx - WB_0);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_setup - setup writeback encoder
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_setup(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>> + struct drm_display_mode mode = phys_enc->cached_mode;
>> + struct drm_framebuffer *fb = NULL;
>> +
>> + DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n",
>> + hw_wb->idx - WB_0, mode.name,
>> + mode.hdisplay, mode.vdisplay);
>> +
>> + dpu_encoder_phys_wb_set_ot_limit(phys_enc);
>> +
>> + dpu_encoder_phys_wb_set_qos_remap(phys_enc);
>> +
>> + dpu_encoder_phys_wb_set_qos(phys_enc);
>> +
>> + dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
>> +
>> + dpu_encoder_phys_wb_setup_cdp(phys_enc);
>> +
>> +}
>> +
>> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg)
>> +{
>> + struct dpu_encoder_phys *phys_enc = arg;
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> +
>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>> + unsigned long lock_flags;
>> + u32 event = DPU_ENCODER_FRAME_EVENT_DONE;
>> +
>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>> +
>> + if (phys_enc->parent_ops->handle_frame_done)
>> + phys_enc->parent_ops->handle_frame_done(phys_enc->parent,
>> + phys_enc, event);
>> +
>> + if (phys_enc->parent_ops->handle_vblank_virt)
>> + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent,
>> + phys_enc);
>> +
>> + spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0);
>> + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
>> +
>> + if (wb_enc->wb_conn)
>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
>> +
>> + /* Signal any waiting atomic commit thread */
>> + wake_up_all(&phys_enc->pending_kickoff_wq);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler
>> + * @arg: Pointer to writeback encoder
>> + * @irq_idx: interrupt index
>> + */
>> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx)
>> +{
>> + _dpu_encoder_phys_wb_frame_done_helper(arg);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB
>> + * @phys: Pointer to physical encoder
>> + * @enable: indicates enable or disable interrupts
>> + */
>> +static void dpu_encoder_phys_wb_irq_ctrl(
>> + struct dpu_encoder_phys *phys, bool enable)
>> +{
>> +
>> + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys);
>> + int ret = 0;
>> + int refcount;
>> +
>> + refcount = atomic_read(&wb_enc->wbirq_refcount);
>> +
>> + if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) {
>> + dpu_encoder_helper_register_irq(phys, INTR_IDX_WB_DONE);
>> + if (ret)
>> + atomic_dec_return(&wb_enc->wbirq_refcount);
>> + } else if (!enable &&
>> + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) {
>> + dpu_encoder_helper_unregister_irq(phys, INTR_IDX_WB_DONE);
>> + if (ret)
>> + atomic_inc_return(&wb_enc->wbirq_refcount);
>> + }
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_mode_set - set display mode
>> + * @phys_enc: Pointer to physical encoder
>> + * @mode: Pointer to requested display mode
>> + * @adj_mode: Pointer to adjusted display mode
>> + */
>> +static void dpu_encoder_phys_wb_mode_set(
>> + struct dpu_encoder_phys *phys_enc,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode *adj_mode)
>> +{
>> + struct dpu_encoder_irq *irq;
>> +
>> + if (adj_mode) {
>> + phys_enc->cached_mode = *adj_mode;
>> + drm_mode_debug_printmodeline(adj_mode);
>> + DPU_DEBUG("caching mode:\n");
>> + }
>> +
>> + irq = &phys_enc->irq[INTR_IDX_WB_DONE];
>> + irq->irq_idx = phys_enc->hw_wb->caps->intr_wb_done;
>> +}
>> +
>> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR;
>> +
>> + wb_enc->wb_done_timeout_cnt++;
>> +
>> + if (wb_enc->wb_done_timeout_cnt == 1)
>> + msm_disp_snapshot_state(phys_enc->parent->dev);
>> +
>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0);
>> +
>> + /* request a ctl reset before the next kickoff */
>> + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET;
>> +
>> + if (wb_enc->wb_conn)
>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
>> +
>> + if (phys_enc->parent_ops->handle_frame_done)
>> + phys_enc->parent_ops->handle_frame_done(
>> + phys_enc->parent, phys_enc, frame_event);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is
>> committed
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static int dpu_encoder_phys_wb_wait_for_commit_done(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + unsigned long ret;
>> + struct dpu_encoder_wait_info wait_info;
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> +
>> + wait_info.wq = &phys_enc->pending_kickoff_wq;
>> + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt;
>> + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS;
>> +
>> + ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE,
>> + &wait_info);
>> + if (ret == -ETIMEDOUT)
>> + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc);
>> + else if (!ret)
>> + wb_enc->wb_done_timeout_cnt = 0;
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing
>> + * @phys_enc: Pointer to physical encoder
>> + * Returns: Zero on success
>> + */
>> +static void dpu_encoder_phys_wb_prepare_for_kickoff(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> + struct drm_connector *drm_conn;
>> + struct drm_connector_state *state;
>> +
>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>> +
>> + if (!wb_enc->wb_conn || !wb_enc->wb_job) {
>> + DPU_ERROR("invalid wb_conn or wb_job\n");
>> + return;
>> + }
>> +
>> + drm_conn = wb_enc->wb_conn->base;
>> + state = drm_conn->state;
>> +
>> + if (wb_enc->wb_conn && wb_enc->wb_job)
>> + drm_writeback_queue_job(wb_enc->wb_conn, state);
>> +
>> + dpu_encoder_phys_wb_setup(phys_enc);
>> +
>> + _dpu_encoder_phys_wb_update_flush(phys_enc);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static bool dpu_encoder_phys_wb_needs_single_flush(struct
>> dpu_encoder_phys *phys_enc)
>> +{
>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>> + return false;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_handle_post_kickoff(
>> + struct dpu_encoder_phys *phys_enc)
>> +{
>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>> +
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_enable - enable writeback encoder
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>> + phys_enc->enable_state = DPU_ENC_ENABLED;
>> +}
>> +/**
>> + * dpu_encoder_phys_wb_disable - disable writeback encoder
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>> +
>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>> +
>> + if (phys_enc->enable_state == DPU_ENC_DISABLED) {
>> + DPU_ERROR("encoder is already disabled\n");
>> + return;
>> + }
>> +
>> + /* reset h/w before final flush */
>> + if (phys_enc->hw_ctl->ops.clear_pending_flush)
>> + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl);
>> +
>> + /*
>> + * New CTL reset sequence from 5.0 MDP onwards.
>> + * If has_3d_merge_reset is not set, legacy reset
>> + * sequence is executed.
>> + *
>> + * Legacy reset sequence has not been implemented yet.
>> + * Any target earlier than SM8150 will need it and when
>> + * WB support is added to those targets will need to add
>> + * the legacy teardown sequence as well.
>> + */
>> + if (phys_enc->hw_pp->merge_3d)
>
> This is a bit.. counterintuitive. I'd prefer hw_ctl->caps->features &
> BIT(DPU_ACTIVE_CTL).
Your suggestion should work.
But consider it this way.
Checking caps is telling us if the chipset supports merge3d which is
sufficient in this case but phys_enc->hw_pp->merge_3d is telling us
whether merge_3d is also being used in this RM session.
So i just thought its a better check to cover both.
>
>> + dpu_encoder_helper_phys_cleanup(phys_enc);
>> +
>> + phys_enc->enable_state = DPU_ENC_DISABLED;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_get_hw_resources - get hardware resources
>> + * @phys_enc: Pointer to physical encoder
>> + * @hw_res: Pointer to encoder resources
>> + */
>> +static void dpu_encoder_phys_wb_get_hw_resources(
>> + struct dpu_encoder_phys *phys_enc,
>> + struct dpu_encoder_hw_resources *hw_res)
>> +{
>> + if (!phys_enc) {
>> + DPU_ERROR("invalid encoder\n");
>> + return;
>> + }
>> +
>> + hw_res->wbs[phys_enc->intf_idx - WB_0] = INTF_MODE_WB_LINE;
>> + DPU_DEBUG("[wb:%d] intf_mode=%d\n", phys_enc->intf_idx - WB_0,
>> + hw_res->wbs[phys_enc->intf_idx - WB_0]);
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder
>> + * @phys_enc: Pointer to physical encoder
>> + */
>> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys
>> *phys_enc)
>> +{
>> + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0);
>> +
>> + if (!phys_enc)
>> + return;
>> +
>> + kfree(phys_enc);
>> +}
>> +
>> +static void dpu_encoder_phys_wb_prepare_wb_job(struct
>> dpu_encoder_phys *phys_enc,
>> + struct drm_writeback_job *job)
>> +{
>> + const struct msm_format *format;
>> + struct dpu_hw_wb_cfg *wb_cfg;
>> + int ret;
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> +
>> + if (!job->fb)
>> + return;
>> +
>> + wb_enc->wb_job = job;
>> + wb_enc->wb_conn = job->connector;
>> + wb_enc->aspace = phys_enc->dpu_kms->base.aspace;
>
> Any particular reason to cache it in wb_enc?
We can technically get this from phys_enc->dpu_kms->base.aspace so I can
drop this.
>
>> +
>> + wb_cfg = &wb_enc->wb_cfg;
>> +
>> + memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg));
>> +
>> + ret = msm_framebuffer_prepare(job->fb, wb_enc->aspace);
>> + if (ret) {
>> + DPU_ERROR("prep fb failed, %d\n", ret);
>> + return;
>> + }
>> +
>> + format = msm_framebuffer_format(job->fb);
>> +
>> + wb_cfg->dest.format = dpu_get_dpu_format_ext(
>> + format->pixel_format, job->fb->modifier);
>> + if (!wb_cfg->dest.format) {
>> + /* this error should be detected during atomic_check */
>> + DPU_ERROR("failed to get format %x\n", format->pixel_format);
>> + return;
>> + }
>> +
>> + ret = dpu_format_populate_layout(wb_enc->aspace, job->fb,
>> &wb_cfg->dest);
>> + if (ret) {
>> + DPU_DEBUG("failed to populate layout %d\n", ret);
>> + return;
>> + }
>> +
>> + wb_cfg->dest.width = job->fb->width;
>> + wb_cfg->dest.height = job->fb->height;
>> + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes;
>> +
>> + if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) &&
>> + (wb_cfg->dest.format->element[0] == C1_B_Cb))
>> + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]);
>> +
>> + DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n",
>> + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1],
>> + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]);
>> +
>> + DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n",
>> + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1],
>> + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]);
>> +}
>> +
>> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct
>> dpu_encoder_phys *phys_enc,
>> + struct drm_writeback_job *job)
>> +{
>> + struct dpu_encoder_phys_wb *wb_enc =
>> to_dpu_encoder_phys_wb(phys_enc);
>> +
>> + if (!job->fb)
>> + return;
>> +
>> + msm_framebuffer_cleanup(job->fb, wb_enc->aspace);
>> + // revisit this after everything else works
>
> Everything works now, doesn't it?
Yeah, everything works.
i forgot to get rid of this comment :)
Had it in a bunch of other places too and missed one while cleaning up.
>
>> + wb_enc->wb_job = NULL;
>> + wb_enc->wb_conn = NULL;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations
>> + * @ops: Pointer to encoder operation table
>> + */
>> +static void dpu_encoder_phys_wb_init_ops(struct dpu_encoder_phys_ops
>> *ops)
>> +{
>> + ops->is_master = dpu_encoder_phys_wb_is_master;
>> + ops->mode_set = dpu_encoder_phys_wb_mode_set;
>> + ops->enable = dpu_encoder_phys_wb_enable;
>> + ops->disable = dpu_encoder_phys_wb_disable;
>> + ops->destroy = dpu_encoder_phys_wb_destroy;
>> + ops->atomic_check = dpu_encoder_phys_wb_atomic_check;
>> + ops->get_hw_resources = dpu_encoder_phys_wb_get_hw_resources;
>> + ops->wait_for_commit_done =
>> dpu_encoder_phys_wb_wait_for_commit_done;
>> + ops->prepare_for_kickoff = dpu_encoder_phys_wb_prepare_for_kickoff;
>> + ops->handle_post_kickoff = dpu_encoder_phys_wb_handle_post_kickoff;
>> + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush;
>> + ops->trigger_start = dpu_encoder_helper_trigger_start;
>> + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job;
>> + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job;
>> + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl;
>> +}
>> +
>> +/**
>> + * dpu_encoder_phys_wb_init - initialize writeback encoder
>> + * @init: Pointer to init info structure with initialization params
>> + */
>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
>> + struct dpu_enc_phys_init_params *p)
>> +{
>> + struct dpu_encoder_phys *phys_enc = NULL;
>> + struct dpu_encoder_phys_wb *wb_enc = NULL;
>> +
>> + struct dpu_encoder_irq *irq;
>> + int ret = 0;
>> + int i;
>> +
>> + DPU_DEBUG("\n");
>> +
>> + if (!p || !p->parent) {
>> + DPU_ERROR("invalid params\n");
>> + ret = -EINVAL;
>> + goto fail_alloc;
>> + }
>> +
>> + wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL);
>> + if (!wb_enc) {
>> + DPU_ERROR("failed to allocate wb phys_enc enc\n");
>> + ret = -ENOMEM;
>> + goto fail_alloc;
>> + }
>> +
>> + phys_enc = &wb_enc->base;
>> + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
>> + phys_enc->intf_idx = p->intf_idx;
>> +
>> + dpu_encoder_phys_wb_init_ops(&phys_enc->ops);
>> + phys_enc->parent = p->parent;
>> + phys_enc->parent_ops = p->parent_ops;
>> + phys_enc->dpu_kms = p->dpu_kms;
>> + phys_enc->split_role = p->split_role;
>> + phys_enc->intf_mode = INTF_MODE_WB_LINE;
>> + phys_enc->intf_idx = p->intf_idx;
>> + phys_enc->enc_spinlock = p->enc_spinlock;
>> +
>> + atomic_set(&wb_enc->wbirq_refcount, 0);
>> +
>> + for (i = 0; i < INTR_IDX_MAX; i++) {
>> + irq = &phys_enc->irq[i];
>> + INIT_LIST_HEAD(&irq->cb.list);
>> + irq->irq_idx = -EINVAL;
>> + irq->cb.arg = phys_enc;
>> + }
>> +
>> + irq = &phys_enc->irq[INTR_IDX_WB_DONE];
>> + irq->name = "wb_done";
>> + irq->intr_idx = INTR_IDX_WB_DONE;
>> + irq->cb.func = dpu_encoder_phys_wb_done_irq;
>> +
>> + atomic_set(&phys_enc->pending_kickoff_cnt, 0);
>> + atomic_set(&phys_enc->vblank_refcount, 0);
>> + wb_enc->wb_done_timeout_cnt = 0;
>> +
>> + init_waitqueue_head(&phys_enc->pending_kickoff_wq);
>> + phys_enc->enable_state = DPU_ENC_DISABLED;
>> +
>> + DPU_DEBUG("Created dpu_encoder_phys for wb %d\n",
>> + phys_enc->intf_idx);
>> +
>> + return phys_enc;
>> +
>> +fail_alloc:
>> + return ERR_PTR(ret);
>> +}
>
>
More information about the Freedreno
mailing list