[Freedreno] [PATCH 08/12] drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback
Abhinav Kumar
quic_abhinavk at quicinc.com
Tue Apr 19 20:19:57 UTC 2022
On 4/14/2022 5:24 PM, Dmitry Baryshkov wrote:
> On 15/04/2022 01:16, Abhinav Kumar wrote:
>>
>>
>> On 2/4/2022 3:19 PM, Dmitry Baryshkov wrote:
>>> On 05/02/2022 00:17, Abhinav Kumar wrote:
>>>> Introduce the dpu_encoder_phys_* for the writeback interface
>>>> to handle writeback specific hardware programming.
>>>>
>>>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>>>
>>> Mostly looks ok, see minor comments bellow.
>>>
>>>> ---
>>>> drivers/gpu/drm/msm/Makefile | 1 +
>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 36 +-
>>>> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 813
>>>> +++++++++++++++++++++
>>>> 3 files changed, 849 insertions(+), 1 deletion(-)
>>>> create mode 100644
>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/Makefile
>>>> b/drivers/gpu/drm/msm/Makefile
>>>> index c43ef35..3abaf84 100644
>>>> --- a/drivers/gpu/drm/msm/Makefile
>>>> +++ b/drivers/gpu/drm/msm/Makefile
>>>> @@ -53,6 +53,7 @@ msm-y := \
>>>> disp/dpu1/dpu_encoder.o \
>>>> disp/dpu1/dpu_encoder_phys_cmd.o \
>>>> disp/dpu1/dpu_encoder_phys_vid.o \
>>>> + disp/dpu1/dpu_encoder_phys_wb.o \
>>>> disp/dpu1/dpu_formats.o \
>>>> disp/dpu1/dpu_hw_catalog.o \
>>>> disp/dpu1/dpu_hw_ctl.o \
>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>>>> index 7b3354d..80da0a9 100644
>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>>>> @@ -159,6 +159,7 @@ struct dpu_encoder_phys_ops {
>>>> * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel
>>>> * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode
>>>> panel
>>>> * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel
>>>> + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector
>>>> */
>>>> enum dpu_intr_idx {
>>>> INTR_IDX_VSYNC,
>>>> @@ -166,6 +167,7 @@ enum dpu_intr_idx {
>>>> INTR_IDX_UNDERRUN,
>>>> INTR_IDX_CTL_START,
>>>> INTR_IDX_RDPTR,
>>>> + INTR_IDX_WB_DONE,
>>>> INTR_IDX_MAX,
>>>> };
>>>> @@ -196,7 +198,7 @@ struct dpu_encoder_irq {
>>>> * @hw_ctl: Hardware interface to the ctl registers
>>>> * @hw_pp: Hardware interface to the ping pong registers
>>>> * @hw_intf: Hardware interface to the intf registers
>>>> - * @hw_wb: Hardware interface to the wb registers
>>>> + * @hw_wb: Hardware interface to the wb registers
>>>> * @dpu_kms: Pointer to the dpu_kms top level
>>>> * @cached_mode: DRM mode cached at mode_set time, acted on in
>>>> enable
>>>> * @enabled: Whether the encoder has enabled and running a
>>>> mode
>>>> @@ -250,6 +252,31 @@ static inline int
>>>> dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
>>>> }
>>>> /**
>>>> + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to
>>>> handle command
>>>> + * mode specific operations
>>>> + * @base: Baseclass physical encoder structure
>>>> + * @wbirq_refcount: Reference count of writeback interrupt
>>>> + * @wb_done_timeout_cnt: number of wb done irq timeout errors
>>>> + * @wb_cfg: writeback block config to store fb related details
>>>> + * @cdp_cfg: chroma down prefetch block config for wb
>>>> + * @aspace: address space to be used for wb framebuffer
>>>> + * @wb_conn: backpointer to writeback connector
>>>> + * @wb_job: backpointer to current writeback job
>>>> + * @dest: dpu buffer layout for current writeback output buffer
>>>> + */
>>>> +struct dpu_encoder_phys_wb {
>>>> + struct dpu_encoder_phys base;
>>>> + atomic_t wbirq_refcount;
>>>> + int wb_done_timeout_cnt;
>>>> + struct dpu_hw_wb_cfg wb_cfg;
>>>> + struct dpu_hw_wb_cdp_cfg cdp_cfg;
>>>
>>> What about moving them to the stack rather storing them in the
>>> structure?
>>
>> Yes cdp_cfg can be moved to the stack. Will do it in the next version.
>>
>> wb_cfg cannot because for drm_wb, prepare_wb_job has the job's fb
>> attributes which are used to setup the wb.
>>
>> But we commit it only in the encoder_kickoff in
>> dpu_encoder_phys_wb_setup_fb().
>>
>> So its shared across two methods.
>>
>>>
>>>> + struct msm_gem_address_space *aspace;
>>>> + struct drm_writeback_connector *wb_conn;
>>>> + struct drm_writeback_job *wb_job;
>>>> + struct dpu_hw_fmt_layout dest;
>>>> +};
>>>> +
>>>> +/**
>>>> * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to
>>>> handle command
>>>> * mode specific operations
>>>> * @base: Baseclass physical encoder structure
>>>> @@ -317,6 +344,13 @@ struct dpu_encoder_phys
>>>> *dpu_encoder_phys_cmd_init(
>>>> struct dpu_enc_phys_init_params *p);
>>>> /**
>>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder
>>>> + * @init: Pointer to init info structure with initialization params
>>>> + */
>>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
>>>> + struct dpu_enc_phys_init_params *p);
>>>> +
>>>> +/**
>>>> * dpu_encoder_helper_trigger_start - control start helper function
>>>> * This helper function may be optionally specified by physical
>>>> * encoders if they require ctl_start triggering.
>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>>>> new file mode 100644
>>>> index 0000000..783f83e
>>>> --- /dev/null
>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>>>> @@ -0,0 +1,813 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>>>> reserved.
>>>> + */
>>>> +
>>>> +#define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__
>>>> +
>>>> +#include <linux/debugfs.h>
>>>
>>> the header is unused
>> ack
>>>
>>>> +
>>>> +#include "dpu_encoder_phys.h"
>>>> +#include "dpu_formats.h"
>>>> +#include "dpu_hw_top.h"
>>>> +#include "dpu_hw_wb.h"
>>>> +#include "dpu_hw_lm.h"
>>>> +#include "dpu_hw_blk.h"
>>>> +#include "dpu_hw_merge3d.h"
>>>> +#include "dpu_hw_interrupts.h"
>>>> +#include "dpu_core_irq.h"
>>>> +#include "dpu_vbif.h"
>>>> +#include "dpu_crtc.h"
>>>> +#include "disp/msm_disp_snapshot.h"
>>>> +
>>>> +#define DEFAULT_MAX_WRITEBACK_WIDTH 2048
>>>> +
>>>> +#define to_dpu_encoder_phys_wb(x) \
>>>> + container_of(x, struct dpu_encoder_phys_wb, base)
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_is_master - report wb always as master encoder
>>>> + */
>>>> +static bool dpu_encoder_phys_wb_is_master(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + return true;
>>>> +}
>>>
>>> A comment that there is only one physical enc for WB would be helpful
>>> here. But maybe we should just pull a generic is_master into
>>> dpu_encoder_phys.h (it would work here too).
>>
>> I am just following what we have today for phys_vid and phys_cmd.
>> But yes, I can leave a comment for sure.
>>
>>>
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_set_ot_limit - set OT limit for writeback
>>>> interface
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_set_ot_limit(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>>>> + struct dpu_vbif_set_ot_params ot_params;
>>>> +
>>>> + memset(&ot_params, 0, sizeof(ot_params));
>>>> + ot_params.xin_id = hw_wb->caps->xin_id;
>>>> + ot_params.num = hw_wb->idx - WB_0;
>>>> + ot_params.width = phys_enc->cached_mode.hdisplay;
>>>> + ot_params.height = phys_enc->cached_mode.vdisplay;
>>>> + ot_params.is_wfd = true;
>>>> + ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode);
>>>> + ot_params.vbif_idx = hw_wb->caps->vbif_idx;
>>>> + ot_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>>>> + ot_params.rd = false;
>>>> +
>>>> + dpu_vbif_set_ot_limit(phys_enc->dpu_kms, &ot_params);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_set_qos_remap - set QoS remapper for writeback
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_set_qos_remap(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb;
>>>> + struct dpu_vbif_set_qos_params qos_params;
>>>> +
>>>> + if (!phys_enc || !phys_enc->parent || !phys_enc->parent->crtc) {
>>>> + DPU_ERROR("invalid arguments\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + if (!phys_enc->hw_wb || !phys_enc->hw_wb->caps) {
>>>> + DPU_ERROR("invalid writeback hardware\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + hw_wb = phys_enc->hw_wb;
>>>> +
>>>> + memset(&qos_params, 0, sizeof(qos_params));
>>>> + qos_params.vbif_idx = hw_wb->caps->vbif_idx;
>>>> + qos_params.xin_id = hw_wb->caps->xin_id;
>>>> + qos_params.clk_ctrl = hw_wb->caps->clk_ctrl;
>>>> + qos_params.num = hw_wb->idx - WB_0;
>>>> + qos_params.is_rt = false;
>>>> +
>>>> + DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n",
>>>> + qos_params.num,
>>>> + qos_params.vbif_idx,
>>>> + qos_params.xin_id, qos_params.is_rt);
>>>> +
>>>> + dpu_vbif_set_qos_remap(phys_enc->dpu_kms, &qos_params);
>>>> +}
>>>> +
>>>> +//this can be moved to some common file?
>>>
>>> C99 comment and missing "FIXME: " :-D
>> Yes I will remove this since i am addressing this now.
>>>
>>> Yes, let's pull it into dpu_hw_util.c
>>>
>>> And if you (by chance) would see a value in unifying other
>>> QoS/CDP-related functions let's move them to the dpu_hw_util.c too.
>>
>> Yes I think I can move some utility functions like below to the util
>> file. Will take care of it in next version.
>>
>>>
>>>> +static u64 _dpu_encoder_phys_wb_get_qos_lut(struct dpu_qos_lut_tbl
>>>> *tbl,
>>>> + u32 total_fl)
>>>> +{
>>>> + int i;
>>>> +
>>>> + if (!tbl || !tbl->nentry || !tbl->entries)
>>>> + return 0;
>>>> +
>>>> + for (i = 0; i < tbl->nentry; i++)
>>>> + if (total_fl <= tbl->entries[i].fl)
>>>> + return tbl->entries[i].lut;
>>>> +
>>>> + /* if last fl is zero, use as default */
>>>> + if (!tbl->entries[i-1].fl)
>>>> + return tbl->entries[i-1].lut;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_set_qos - set QoS/danger/safe LUTs for
>>>> writeback
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_set_qos(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb;
>>>> + struct dpu_hw_wb_qos_cfg qos_cfg;
>>>> + struct dpu_mdss_cfg *catalog;
>>>> + struct dpu_qos_lut_tbl *qos_lut_tb;
>>>> +
>>>> + if (!phys_enc || !phys_enc->dpu_kms ||
>>>> !phys_enc->dpu_kms->catalog) {
>>>> + DPU_ERROR("invalid parameter(s)\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + catalog = phys_enc->dpu_kms->catalog;
>>>> +
>>>> + hw_wb = phys_enc->hw_wb;
>>>> +
>>>> + memset(&qos_cfg, 0, sizeof(struct dpu_hw_wb_qos_cfg));
>>>> + qos_cfg.danger_safe_en = true;
>>>> + qos_cfg.danger_lut =
>>>> + catalog->perf.danger_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>>>> +
>>>> + qos_cfg.safe_lut =
>>>> catalog->perf.safe_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>>>> +
>>>> + qos_lut_tb = &catalog->perf.qos_lut_tbl[DPU_QOS_LUT_USAGE_NRT];
>>>> + qos_cfg.creq_lut = _dpu_encoder_phys_wb_get_qos_lut(qos_lut_tb,
>>>> 0);
>>>> +
>>>> + if (hw_wb->ops.setup_qos_lut)
>>>> + hw_wb->ops.setup_qos_lut(hw_wb, &qos_cfg);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_setup_fb - setup output framebuffer
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + * @fb: Pointer to output framebuffer
>>>> + * @wb_roi: Pointer to output region of interest
>>>> + */
>>>> +static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys
>>>> *phys_enc,
>>>> + struct drm_framebuffer *fb)
>>>> +{
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> + struct dpu_hw_wb *hw_wb;
>>>> + struct dpu_hw_wb_cfg *wb_cfg;
>>>> + struct dpu_hw_wb_cdp_cfg *cdp_cfg;
>>>> +
>>>> + if (!phys_enc || !phys_enc->dpu_kms ||
>>>> !phys_enc->dpu_kms->catalog ||
>>>> + !phys_enc->connector) {
>>>> + DPU_ERROR("invalid encoder\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + hw_wb = phys_enc->hw_wb;
>>>> + wb_cfg = &wb_enc->wb_cfg;
>>>> + cdp_cfg = &wb_enc->cdp_cfg;
>>>> +
>>>> + wb_cfg->intf_mode = phys_enc->intf_mode;
>>>> + wb_cfg->roi.x1 = 0;
>>>> + wb_cfg->roi.x2 = phys_enc->cached_mode.hdisplay;
>>>> + wb_cfg->roi.y1 = 0;
>>>> + wb_cfg->roi.y2 = phys_enc->cached_mode.vdisplay;
>>>> +
>>>> + if (hw_wb->ops.setup_roi)
>>>> + hw_wb->ops.setup_roi(hw_wb, wb_cfg);
>>>> +
>>>> + if (hw_wb->ops.setup_outformat)
>>>> + hw_wb->ops.setup_outformat(hw_wb, wb_cfg);
>>>> +
>>>> + if (hw_wb->ops.setup_cdp) {
>>>> + memset(cdp_cfg, 0, sizeof(struct dpu_hw_wb_cdp_cfg));
>>>> +
>>>> + cdp_cfg->enable = phys_enc->dpu_kms->catalog->perf.cdp_cfg
>>>> + [DPU_PERF_CDP_USAGE_NRT].wr_enable;
>>>> + cdp_cfg->ubwc_meta_enable =
>>>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format);
>>>> + cdp_cfg->tile_amortize_enable =
>>>> + DPU_FORMAT_IS_UBWC(wb_cfg->dest.format) ||
>>>> + DPU_FORMAT_IS_TILE(wb_cfg->dest.format);
>>>> + cdp_cfg->preload_ahead = DPU_WB_CDP_PRELOAD_AHEAD_64;
>>>> +
>>>> + hw_wb->ops.setup_cdp(hw_wb, cdp_cfg);
>>>> + }
>>>> +
>>>> + if (hw_wb->ops.setup_outaddress)
>>>> + hw_wb->ops.setup_outaddress(hw_wb, wb_cfg);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down prefetch block
>>>> + * @phys_enc:Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_setup_cdp(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb;
>>>> + struct dpu_hw_ctl *ctl;
>>>> +
>>>> + if (!phys_enc) {
>>>> + DPU_ERROR("invalid encoder\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + hw_wb = phys_enc->hw_wb;
>>>> + ctl = phys_enc->hw_ctl;
>>>> +
>>>> + if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) &&
>>>> + (phys_enc->hw_ctl &&
>>>> + phys_enc->hw_ctl->ops.setup_intf_cfg)) {
>>>> + struct dpu_hw_intf_cfg intf_cfg = {0};
>>>> + struct dpu_hw_pingpong *hw_pp = phys_enc->hw_pp;
>>>> + enum dpu_3d_blend_mode mode_3d;
>>>> +
>>>> + mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>>>> +
>>>> + intf_cfg.intf = DPU_NONE;
>>>> + intf_cfg.wb = hw_wb->idx;
>>>> +
>>>> + if (mode_3d && hw_pp && hw_pp->merge_3d)
>>>> + intf_cfg.merge_3d = hw_pp->merge_3d->idx;
>>>> +
>>>> + if (phys_enc->hw_pp->merge_3d &&
>>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode)
>>>> +
>>>> phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d,
>>>> + mode_3d);
>>>> +
>>>> + /* setup which pp blk will connect to this wb */
>>>> + if (hw_pp && phys_enc->hw_wb->ops.bind_pingpong_blk)
>>>> + phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb,
>>>> true,
>>>> + phys_enc->hw_pp->idx);
>>>> +
>>>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl,
>>>> + &intf_cfg, true);
>>>> + } else if (phys_enc->hw_ctl &&
>>>> phys_enc->hw_ctl->ops.setup_intf_cfg) {
>>>> + struct dpu_hw_intf_cfg intf_cfg = {0};
>>>> +
>>>> + intf_cfg.intf = DPU_NONE;
>>>> + intf_cfg.wb = hw_wb->idx;
>>>> + intf_cfg.mode_3d =
>>>> + dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>>>> + phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl,
>>>> &intf_cfg, true);
>>>> + }
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic
>>>> states
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + * @crtc_state: Pointer to CRTC atomic state
>>>> + * @conn_state: Pointer to connector atomic state
>>>> + */
>>>> +static int dpu_encoder_phys_wb_atomic_check(
>>>> + struct dpu_encoder_phys *phys_enc,
>>>> + struct drm_crtc_state *crtc_state,
>>>> + struct drm_connector_state *conn_state)
>>>> +{
>>>> + struct drm_framebuffer *fb;
>>>> + const struct drm_display_mode *mode;
>>>> +
>>>> + DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n",
>>>> + phys_enc->intf_idx, mode->name, mode->hdisplay,
>>>> mode->vdisplay);
>>>> +
>>>> + if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
>>>> + return 0;
>>>> +
>>>> + fb = conn_state->writeback_job->fb;
>>>> + mode = &crtc_state->mode;
>>>> +
>>>> + if (!conn_state || !conn_state->connector) {
>>>> + DPU_ERROR("invalid connector state\n");
>>>> + return -EINVAL;
>>>> + } else if (conn_state->connector->status !=
>>>> + connector_status_connected) {
>>>> + DPU_ERROR("connector not connected %d\n",
>>>> + conn_state->connector->status);
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + DPU_DEBUG("[fb_id:%u][fb:%u,%u]\n", fb->base.id,
>>>> + fb->width, fb->height);
>>>> +
>>>> + if (fb->width != mode->hdisplay) {
>>>> + DPU_ERROR("invalid fb w=%d, mode w=%d\n", fb->width,
>>>> + mode->hdisplay);
>>>> + return -EINVAL;
>>>> + } else if (fb->height != mode->vdisplay) {
>>>> + DPU_ERROR("invalid fb h=%d, mode h=%d\n", fb->height,
>>>> + mode->vdisplay);
>>>> + return -EINVAL;
>>>> + } else if (fb->width > DEFAULT_MAX_WRITEBACK_WIDTH) {
>>>> + DPU_ERROR("invalid fb w=%d, maxlinewidth=%u\n",
>>>> + fb->width, DEFAULT_MAX_WRITEBACK_WIDTH);
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +
>>>> +/**
>>>> + * _dpu_encoder_phys_wb_update_flush - flush hardware update
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void _dpu_encoder_phys_wb_update_flush(struct
>>>> dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb;
>>>> + struct dpu_hw_ctl *hw_ctl;
>>>> + struct dpu_hw_pingpong *hw_pp;
>>>> + u32 pending_flush = 0;
>>>> +
>>>> + if (!phys_enc)
>>>> + return;
>>>> +
>>>> + hw_wb = phys_enc->hw_wb;
>>>> + hw_pp = phys_enc->hw_pp;
>>>> + hw_ctl = phys_enc->hw_ctl;
>>>> +
>>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>>>> +
>>>> + if (!hw_ctl) {
>>>> + DPU_DEBUG("[wb:%d] no ctl assigned\n", hw_wb->idx - WB_0);
>>>> + return;
>>>> + }
>>>> +
>>>> + if (hw_ctl->ops.update_pending_flush_wb)
>>>> + hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx);
>>>> +
>>>> + if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp &&
>>>> hw_pp->merge_3d)
>>>> + hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl,
>>>> + hw_pp->merge_3d->idx);
>>>> +
>>>> + if (hw_ctl->ops.get_pending_flush)
>>>> + pending_flush = hw_ctl->ops.get_pending_flush(hw_ctl);
>>>> +
>>>> + DPU_DEBUG("Pending flush mask for CTL_%d is 0x%x, WB %d\n",
>>>> + hw_ctl->idx - CTL_0, pending_flush,
>>>> + hw_wb->idx - WB_0);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_setup - setup writeback encoder
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_setup(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>>>> + struct drm_display_mode mode = phys_enc->cached_mode;
>>>> + struct drm_framebuffer *fb = NULL;
>>>> +
>>>> + DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n",
>>>> + hw_wb->idx - WB_0, mode.name,
>>>> + mode.hdisplay, mode.vdisplay);
>>>> +
>>>> + dpu_encoder_phys_wb_set_ot_limit(phys_enc);
>>>> +
>>>> + dpu_encoder_phys_wb_set_qos_remap(phys_enc);
>>>> +
>>>> + dpu_encoder_phys_wb_set_qos(phys_enc);
>>>> +
>>>> + dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
>>>> +
>>>> + dpu_encoder_phys_wb_setup_cdp(phys_enc);
>>>> +
>>>> +}
>>>> +
>>>> +static void _dpu_encoder_phys_wb_frame_done_helper(void *arg)
>>>> +{
>>>> + struct dpu_encoder_phys *phys_enc = arg;
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> +
>>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>>>> + unsigned long lock_flags;
>>>> + u32 event = DPU_ENCODER_FRAME_EVENT_DONE;
>>>> +
>>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>>>> +
>>>> + if (phys_enc->parent_ops->handle_frame_done)
>>>> + phys_enc->parent_ops->handle_frame_done(phys_enc->parent,
>>>> + phys_enc, event);
>>>> +
>>>> + if (phys_enc->parent_ops->handle_vblank_virt)
>>>> + phys_enc->parent_ops->handle_vblank_virt(phys_enc->parent,
>>>> + phys_enc);
>>>> +
>>>> + spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
>>>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0);
>>>> + spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
>>>> +
>>>> + if (wb_enc->wb_conn)
>>>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
>>>> +
>>>> + /* Signal any waiting atomic commit thread */
>>>> + wake_up_all(&phys_enc->pending_kickoff_wq);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_done_irq - writeback interrupt handler
>>>> + * @arg: Pointer to writeback encoder
>>>> + * @irq_idx: interrupt index
>>>> + */
>>>> +static void dpu_encoder_phys_wb_done_irq(void *arg, int irq_idx)
>>>> +{
>>>> + _dpu_encoder_phys_wb_frame_done_helper(arg);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_irq_ctrl - irq control of WB
>>>> + * @phys: Pointer to physical encoder
>>>> + * @enable: indicates enable or disable interrupts
>>>> + */
>>>> +static void dpu_encoder_phys_wb_irq_ctrl(
>>>> + struct dpu_encoder_phys *phys, bool enable)
>>>> +{
>>>> +
>>>> + struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys);
>>>> + int ret = 0;
>>>> + int refcount;
>>>> +
>>>> + refcount = atomic_read(&wb_enc->wbirq_refcount);
>>>> +
>>>> + if (enable && atomic_inc_return(&wb_enc->wbirq_refcount) == 1) {
>>>> + dpu_encoder_helper_register_irq(phys, INTR_IDX_WB_DONE);
>>>> + if (ret)
>>>> + atomic_dec_return(&wb_enc->wbirq_refcount);
>>>> + } else if (!enable &&
>>>> + atomic_dec_return(&wb_enc->wbirq_refcount) == 0) {
>>>> + dpu_encoder_helper_unregister_irq(phys, INTR_IDX_WB_DONE);
>>>> + if (ret)
>>>> + atomic_inc_return(&wb_enc->wbirq_refcount);
>>>> + }
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_mode_set - set display mode
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + * @mode: Pointer to requested display mode
>>>> + * @adj_mode: Pointer to adjusted display mode
>>>> + */
>>>> +static void dpu_encoder_phys_wb_mode_set(
>>>> + struct dpu_encoder_phys *phys_enc,
>>>> + struct drm_display_mode *mode,
>>>> + struct drm_display_mode *adj_mode)
>>>> +{
>>>> + struct dpu_encoder_irq *irq;
>>>> +
>>>> + if (adj_mode) {
>>>> + phys_enc->cached_mode = *adj_mode;
>>>> + drm_mode_debug_printmodeline(adj_mode);
>>>> + DPU_DEBUG("caching mode:\n");
>>>> + }
>>>> +
>>>> + irq = &phys_enc->irq[INTR_IDX_WB_DONE];
>>>> + irq->irq_idx = phys_enc->hw_wb->caps->intr_wb_done;
>>>> +}
>>>> +
>>>> +static void _dpu_encoder_phys_wb_handle_wbdone_timeout(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> + u32 frame_event = DPU_ENCODER_FRAME_EVENT_ERROR;
>>>> +
>>>> + wb_enc->wb_done_timeout_cnt++;
>>>> +
>>>> + if (wb_enc->wb_done_timeout_cnt == 1)
>>>> + msm_disp_snapshot_state(phys_enc->parent->dev);
>>>> +
>>>> + atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0);
>>>> +
>>>> + /* request a ctl reset before the next kickoff */
>>>> + phys_enc->enable_state = DPU_ENC_ERR_NEEDS_HW_RESET;
>>>> +
>>>> + if (wb_enc->wb_conn)
>>>> + drm_writeback_signal_completion(wb_enc->wb_conn, 0);
>>>> +
>>>> + if (phys_enc->parent_ops->handle_frame_done)
>>>> + phys_enc->parent_ops->handle_frame_done(
>>>> + phys_enc->parent, phys_enc, frame_event);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_wait_for_commit_done - wait until request is
>>>> committed
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static int dpu_encoder_phys_wb_wait_for_commit_done(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + unsigned long ret;
>>>> + struct dpu_encoder_wait_info wait_info;
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> +
>>>> + wait_info.wq = &phys_enc->pending_kickoff_wq;
>>>> + wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt;
>>>> + wait_info.timeout_ms = KICKOFF_TIMEOUT_MS;
>>>> +
>>>> + ret = dpu_encoder_helper_wait_for_irq(phys_enc, INTR_IDX_WB_DONE,
>>>> + &wait_info);
>>>> + if (ret == -ETIMEDOUT)
>>>> + _dpu_encoder_phys_wb_handle_wbdone_timeout(phys_enc);
>>>> + else if (!ret)
>>>> + wb_enc->wb_done_timeout_cnt = 0;
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_prepare_for_kickoff - pre-kickoff processing
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + * Returns: Zero on success
>>>> + */
>>>> +static void dpu_encoder_phys_wb_prepare_for_kickoff(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> + struct drm_connector *drm_conn;
>>>> + struct drm_connector_state *state;
>>>> +
>>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>>>> +
>>>> + if (!wb_enc->wb_conn || !wb_enc->wb_job) {
>>>> + DPU_ERROR("invalid wb_conn or wb_job\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + drm_conn = wb_enc->wb_conn->base;
>>>> + state = drm_conn->state;
>>>> +
>>>> + if (wb_enc->wb_conn && wb_enc->wb_job)
>>>> + drm_writeback_queue_job(wb_enc->wb_conn, state);
>>>> +
>>>> + dpu_encoder_phys_wb_setup(phys_enc);
>>>> +
>>>> + _dpu_encoder_phys_wb_update_flush(phys_enc);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_needs_single_flush - trigger flush processing
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static bool dpu_encoder_phys_wb_needs_single_flush(struct
>>>> dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>>>> + return false;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_handle_post_kickoff - post-kickoff processing
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_handle_post_kickoff(
>>>> + struct dpu_encoder_phys *phys_enc)
>>>> +{
>>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>>>> +
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_enable - enable writeback encoder
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_enable(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->hw_wb->idx - WB_0);
>>>> + phys_enc->enable_state = DPU_ENC_ENABLED;
>>>> +}
>>>> +/**
>>>> + * dpu_encoder_phys_wb_disable - disable writeback encoder
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>>>> +
>>>> + DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
>>>> +
>>>> + if (phys_enc->enable_state == DPU_ENC_DISABLED) {
>>>> + DPU_ERROR("encoder is already disabled\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + /* reset h/w before final flush */
>>>> + if (phys_enc->hw_ctl->ops.clear_pending_flush)
>>>> + phys_enc->hw_ctl->ops.clear_pending_flush(phys_enc->hw_ctl);
>>>> +
>>>> + /*
>>>> + * New CTL reset sequence from 5.0 MDP onwards.
>>>> + * If has_3d_merge_reset is not set, legacy reset
>>>> + * sequence is executed.
>>>> + *
>>>> + * Legacy reset sequence has not been implemented yet.
>>>> + * Any target earlier than SM8150 will need it and when
>>>> + * WB support is added to those targets will need to add
>>>> + * the legacy teardown sequence as well.
>>>> + */
>>>> + if (phys_enc->hw_pp->merge_3d)
>>>
>>> This is a bit.. counterintuitive. I'd prefer hw_ctl->caps->features &
>>> BIT(DPU_ACTIVE_CTL).
>> Your suggestion should work.
>>
>> But consider it this way.
>>
>> Checking caps is telling us if the chipset supports merge3d which is
>> sufficient in this case but phys_enc->hw_pp->merge_3d is telling us
>> whether merge_3d is also being used in this RM session.
>>
>> So i just thought its a better check to cover both.
>
> hw_pp->merge_3d is set when PP has a MERGE_3D attached in hardware, no
> matter if it is used in the current pipeline or not.
>
> As I wrote, the code is counterintuitive. The comment talks about MDP
> 5.0, but the condition checks hw_pp->merge_3d, which might not be
> present for tons of other reasons (starting from somebody forgetting to
> list it in the hw_catalog).
Alright, I will uset the hw_ctl->caps->features & BIT(DPU_ACTIVE_CTL)
>
> And in fact there is a followup question. Can we push this check (and a
> legacy reset sequence) into the dpu_encoder_helper_phys_cleanup()
> itself? Thus the dpu_encoder_phys will just call _helper_phys_cleanup()
> and let the helper care about hardware details.
So like I mentioned, at the moment, I am not fully confident of the
testing of the sequence for all use-cases to use if for all interfaces
(although downstream is already doing it ).
I will certainly, keep testing this and if it looks fine, I can easily
move this one level up in a follow-up change and move this out of
phys_wb. Right now, its part of phys_wb because only wb uses it.
>
>
>>>> + dpu_encoder_helper_phys_cleanup(phys_enc);
>>>> +
>>>> + phys_enc->enable_state = DPU_ENC_DISABLED;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_get_hw_resources - get hardware resources
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + * @hw_res: Pointer to encoder resources
>>>> + */
>>>> +static void dpu_encoder_phys_wb_get_hw_resources(
>>>> + struct dpu_encoder_phys *phys_enc,
>>>> + struct dpu_encoder_hw_resources *hw_res)
>>>> +{
>>>> + if (!phys_enc) {
>>>> + DPU_ERROR("invalid encoder\n");
>>>> + return;
>>>> + }
>>>> +
>>>> + hw_res->wbs[phys_enc->intf_idx - WB_0] = INTF_MODE_WB_LINE;
>>>> + DPU_DEBUG("[wb:%d] intf_mode=%d\n", phys_enc->intf_idx - WB_0,
>>>> + hw_res->wbs[phys_enc->intf_idx - WB_0]);
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_destroy - destroy writeback encoder
>>>> + * @phys_enc: Pointer to physical encoder
>>>> + */
>>>> +static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys
>>>> *phys_enc)
>>>> +{
>>>> + DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0);
>>>> +
>>>> + if (!phys_enc)
>>>> + return;
>>>> +
>>>> + kfree(phys_enc);
>>>> +}
>>>> +
>>>> +static void dpu_encoder_phys_wb_prepare_wb_job(struct
>>>> dpu_encoder_phys *phys_enc,
>>>> + struct drm_writeback_job *job)
>>>> +{
>>>> + const struct msm_format *format;
>>>> + struct dpu_hw_wb_cfg *wb_cfg;
>>>> + int ret;
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> +
>>>> + if (!job->fb)
>>>> + return;
>>>> +
>>>> + wb_enc->wb_job = job;
>>>> + wb_enc->wb_conn = job->connector;
>>>> + wb_enc->aspace = phys_enc->dpu_kms->base.aspace;
>>>
>>> Any particular reason to cache it in wb_enc?
>>
>> We can technically get this from phys_enc->dpu_kms->base.aspace so I
>> can drop this.
>>
>>>
>>>> +
>>>> + wb_cfg = &wb_enc->wb_cfg;
>>>> +
>>>> + memset(wb_cfg, 0, sizeof(struct dpu_hw_wb_cfg));
>>>> +
>>>> + ret = msm_framebuffer_prepare(job->fb, wb_enc->aspace);
>>>> + if (ret) {
>>>> + DPU_ERROR("prep fb failed, %d\n", ret);
>>>> + return;
>>>> + }
>>>> +
>>>> + format = msm_framebuffer_format(job->fb);
>>>> +
>>>> + wb_cfg->dest.format = dpu_get_dpu_format_ext(
>>>> + format->pixel_format, job->fb->modifier);
>>>> + if (!wb_cfg->dest.format) {
>>>> + /* this error should be detected during atomic_check */
>>>> + DPU_ERROR("failed to get format %x\n", format->pixel_format);
>>>> + return;
>>>> + }
>>>> +
>>>> + ret = dpu_format_populate_layout(wb_enc->aspace, job->fb,
>>>> &wb_cfg->dest);
>>>> + if (ret) {
>>>> + DPU_DEBUG("failed to populate layout %d\n", ret);
>>>> + return;
>>>> + }
>>>> +
>>>> + wb_cfg->dest.width = job->fb->width;
>>>> + wb_cfg->dest.height = job->fb->height;
>>>> + wb_cfg->dest.num_planes = wb_cfg->dest.format->num_planes;
>>>> +
>>>> + if ((wb_cfg->dest.format->fetch_planes == DPU_PLANE_PLANAR) &&
>>>> + (wb_cfg->dest.format->element[0] == C1_B_Cb))
>>>> + swap(wb_cfg->dest.plane_addr[1], wb_cfg->dest.plane_addr[2]);
>>>> +
>>>> + DPU_DEBUG("[fb_offset:%8.8x,%8.8x,%8.8x,%8.8x]\n",
>>>> + wb_cfg->dest.plane_addr[0], wb_cfg->dest.plane_addr[1],
>>>> + wb_cfg->dest.plane_addr[2], wb_cfg->dest.plane_addr[3]);
>>>> +
>>>> + DPU_DEBUG("[fb_stride:%8.8x,%8.8x,%8.8x,%8.8x]\n",
>>>> + wb_cfg->dest.plane_pitch[0], wb_cfg->dest.plane_pitch[1],
>>>> + wb_cfg->dest.plane_pitch[2], wb_cfg->dest.plane_pitch[3]);
>>>> +}
>>>> +
>>>> +static void dpu_encoder_phys_wb_cleanup_wb_job(struct
>>>> dpu_encoder_phys *phys_enc,
>>>> + struct drm_writeback_job *job)
>>>> +{
>>>> + struct dpu_encoder_phys_wb *wb_enc =
>>>> to_dpu_encoder_phys_wb(phys_enc);
>>>> +
>>>> + if (!job->fb)
>>>> + return;
>>>> +
>>>> + msm_framebuffer_cleanup(job->fb, wb_enc->aspace);
>>>> + // revisit this after everything else works
>>>
>>> Everything works now, doesn't it?
>>
>> Yeah, everything works.
>> i forgot to get rid of this comment :)
>> Had it in a bunch of other places too and missed one while cleaning up.
>>
>>>
>>>> + wb_enc->wb_job = NULL;
>>>> + wb_enc->wb_conn = NULL;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_init_ops - initialize writeback operations
>>>> + * @ops: Pointer to encoder operation table
>>>> + */
>>>> +static void dpu_encoder_phys_wb_init_ops(struct
>>>> dpu_encoder_phys_ops *ops)
>>>> +{
>>>> + ops->is_master = dpu_encoder_phys_wb_is_master;
>>>> + ops->mode_set = dpu_encoder_phys_wb_mode_set;
>>>> + ops->enable = dpu_encoder_phys_wb_enable;
>>>> + ops->disable = dpu_encoder_phys_wb_disable;
>>>> + ops->destroy = dpu_encoder_phys_wb_destroy;
>>>> + ops->atomic_check = dpu_encoder_phys_wb_atomic_check;
>>>> + ops->get_hw_resources = dpu_encoder_phys_wb_get_hw_resources;
>>>> + ops->wait_for_commit_done =
>>>> dpu_encoder_phys_wb_wait_for_commit_done;
>>>> + ops->prepare_for_kickoff =
>>>> dpu_encoder_phys_wb_prepare_for_kickoff;
>>>> + ops->handle_post_kickoff =
>>>> dpu_encoder_phys_wb_handle_post_kickoff;
>>>> + ops->needs_single_flush = dpu_encoder_phys_wb_needs_single_flush;
>>>> + ops->trigger_start = dpu_encoder_helper_trigger_start;
>>>> + ops->prepare_wb_job = dpu_encoder_phys_wb_prepare_wb_job;
>>>> + ops->cleanup_wb_job = dpu_encoder_phys_wb_cleanup_wb_job;
>>>> + ops->irq_control = dpu_encoder_phys_wb_irq_ctrl;
>>>> +}
>>>> +
>>>> +/**
>>>> + * dpu_encoder_phys_wb_init - initialize writeback encoder
>>>> + * @init: Pointer to init info structure with initialization params
>>>> + */
>>>> +struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
>>>> + struct dpu_enc_phys_init_params *p)
>>>> +{
>>>> + struct dpu_encoder_phys *phys_enc = NULL;
>>>> + struct dpu_encoder_phys_wb *wb_enc = NULL;
>>>> +
>>>> + struct dpu_encoder_irq *irq;
>>>> + int ret = 0;
>>>> + int i;
>>>> +
>>>> + DPU_DEBUG("\n");
>>>> +
>>>> + if (!p || !p->parent) {
>>>> + DPU_ERROR("invalid params\n");
>>>> + ret = -EINVAL;
>>>> + goto fail_alloc;
>>>> + }
>>>> +
>>>> + wb_enc = kzalloc(sizeof(*wb_enc), GFP_KERNEL);
>>>> + if (!wb_enc) {
>>>> + DPU_ERROR("failed to allocate wb phys_enc enc\n");
>>>> + ret = -ENOMEM;
>>>> + goto fail_alloc;
>>>> + }
>>>> +
>>>> + phys_enc = &wb_enc->base;
>>>> + phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
>>>> + phys_enc->intf_idx = p->intf_idx;
>>>> +
>>>> + dpu_encoder_phys_wb_init_ops(&phys_enc->ops);
>>>> + phys_enc->parent = p->parent;
>>>> + phys_enc->parent_ops = p->parent_ops;
>>>> + phys_enc->dpu_kms = p->dpu_kms;
>>>> + phys_enc->split_role = p->split_role;
>>>> + phys_enc->intf_mode = INTF_MODE_WB_LINE;
>>>> + phys_enc->intf_idx = p->intf_idx;
>>>> + phys_enc->enc_spinlock = p->enc_spinlock;
>>>> +
>>>> + atomic_set(&wb_enc->wbirq_refcount, 0);
>>>> +
>>>> + for (i = 0; i < INTR_IDX_MAX; i++) {
>>>> + irq = &phys_enc->irq[i];
>>>> + INIT_LIST_HEAD(&irq->cb.list);
>>>> + irq->irq_idx = -EINVAL;
>>>> + irq->cb.arg = phys_enc;
>>>> + }
>>>> +
>>>> + irq = &phys_enc->irq[INTR_IDX_WB_DONE];
>>>> + irq->name = "wb_done";
>>>> + irq->intr_idx = INTR_IDX_WB_DONE;
>>>> + irq->cb.func = dpu_encoder_phys_wb_done_irq;
>>>> +
>>>> + atomic_set(&phys_enc->pending_kickoff_cnt, 0);
>>>> + atomic_set(&phys_enc->vblank_refcount, 0);
>>>> + wb_enc->wb_done_timeout_cnt = 0;
>>>> +
>>>> + init_waitqueue_head(&phys_enc->pending_kickoff_wq);
>>>> + phys_enc->enable_state = DPU_ENC_DISABLED;
>>>> +
>>>> + DPU_DEBUG("Created dpu_encoder_phys for wb %d\n",
>>>> + phys_enc->intf_idx);
>>>> +
>>>> + return phys_enc;
>>>> +
>>>> +fail_alloc:
>>>> + return ERR_PTR(ret);
>>>> +}
>>>
>>>
>
>
More information about the Freedreno
mailing list