[Freedreno] [PATCH v2 08/17] drm/msm/dpu: add changes to support writeback in hw_ctl
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Apr 20 06:59:29 UTC 2022
On 20/04/2022 04:46, Abhinav Kumar wrote:
> Add changes to support writeback module in the dpu_hw_ctl
> interface.
>
> changes in v2:
> - keep only the wb specific changes to reset_intf_cfg
> - use cfg->intf / cfg->wb to identify intf or wb
> - use bit-wise OR for the wb bits while programming
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 43 +++++++++++++++++++++++++++---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 15 ++++++++++-
> 2 files changed, 53 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 524f024..495a9cd 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> +/* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> */
>
> #include <linux/delay.h>
> @@ -23,10 +24,12 @@
> #define CTL_SW_RESET 0x030
> #define CTL_LAYER_EXTN_OFFSET 0x40
> #define CTL_MERGE_3D_ACTIVE 0x0E4
> +#define CTL_WB_ACTIVE 0x0EC
> #define CTL_INTF_ACTIVE 0x0F4
> #define CTL_MERGE_3D_FLUSH 0x100
> #define CTL_DSC_ACTIVE 0x0E8
> #define CTL_DSC_FLUSH 0x104
> +#define CTL_WB_FLUSH 0x108
> #define CTL_INTF_FLUSH 0x110
> #define CTL_INTF_MASTER 0x134
> #define CTL_FETCH_PIPE_ACTIVE 0x0FC
> @@ -38,6 +41,7 @@
> #define MERGE_3D_IDX 23
> #define DSC_IDX 22
> #define INTF_IDX 31
> +#define WB_IDX 16
> #define CTL_INVALID_BIT 0xffff
> #define CTL_DEFAULT_GROUP_ID 0xf
>
> @@ -135,6 +139,9 @@ static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> if (ctx->pending_flush_mask & BIT(INTF_IDX))
> DPU_REG_WRITE(&ctx->hw, CTL_INTF_FLUSH,
> ctx->pending_intf_flush_mask);
> + if (ctx->pending_flush_mask & BIT(WB_IDX))
> + DPU_REG_WRITE(&ctx->hw, CTL_WB_FLUSH,
> + ctx->pending_wb_flush_mask);
>
> DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask);
> }
> @@ -255,6 +262,13 @@ static void dpu_hw_ctl_update_pending_flush_intf(struct dpu_hw_ctl *ctx,
> }
> }
>
> +static void dpu_hw_ctl_update_pending_flush_wb_v1(struct dpu_hw_ctl *ctx,
> + enum dpu_wb wb)
> +{
> + ctx->pending_wb_flush_mask |= BIT(wb - WB_0);
> + ctx->pending_flush_mask |= BIT(WB_IDX);
> +}
> +
> static void dpu_hw_ctl_update_pending_flush_intf_v1(struct dpu_hw_ctl *ctx,
> enum dpu_intf intf)
> {
> @@ -504,6 +518,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> {
> struct dpu_hw_blk_reg_map *c = &ctx->hw;
> u32 intf_active = 0;
> + u32 wb_active = 0;
> u32 mode_sel = 0;
>
> /* CTL_TOP[31:28] carries group_id to collate CTL paths
> @@ -519,11 +534,20 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> if (cfg->intf_mode_sel == DPU_CTL_MODE_SEL_CMD)
> mode_sel |= BIT(17);
>
> - intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE);
> - intf_active |= BIT(cfg->intf - INTF_0);
> + if (cfg->intf) {
> + intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE);
> + intf_active |= BIT(cfg->intf - INTF_0);
> + }
> +
> + if (cfg->wb) {
> + wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE);
> + wb_active |= BIT(cfg->wb - WB_0);
> + }
>
> DPU_REG_WRITE(c, CTL_TOP, mode_sel);
> DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
> + DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
This will not work as expected. If cfg->intf is not set, CTL_INTF_ACTIVE
will be reset to 0 (while it should have been retained). Please change
this to always read CTL_INTF_ACTIVE/CTL_WB_ACTIVE.
> +
> if (cfg->merge_3d)
> DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
> BIT(cfg->merge_3d - MERGE_3D_0));
> @@ -546,6 +570,9 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> intf_cfg |= (cfg->mode_3d - 0x1) << 20;
> }
>
> + if (cfg->wb)
> + intf_cfg |= (cfg->wb & 0x3) + 2;
> +
Ugh. I see that we have the same code in downstream driver. And that we
do not support WB_0 at all. But maybe we should be more explicit here.
> switch (cfg->intf_mode_sel) {
> case DPU_CTL_MODE_SEL_VID:
> intf_cfg &= ~BIT(17);
> @@ -568,12 +595,13 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> {
> struct dpu_hw_blk_reg_map *c = &ctx->hw;
> u32 intf_active = 0;
> + u32 wb_active = 0;
> u32 merge3d_active = 0;
>
> /*
> * This API resets each portion of the CTL path namely,
> * clearing the sspps staged on the lm, merge_3d block,
> - * interfaces etc to ensure clean teardown of the pipeline.
> + * interfaces , writeback etc to ensure clean teardown of the pipeline.
> * This will be used for writeback to begin with to have a
> * proper teardown of the writeback session but upon further
> * validation, this can be extended to all interfaces.
> @@ -592,6 +620,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> intf_active &= ~BIT(cfg->intf - INTF_0);
> DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
> }
> +
> + if (cfg->wb) {
> + wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE);
> + wb_active &= ~BIT(cfg->wb - WB_0);
> + DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
> + }
> }
>
> static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,
> @@ -622,6 +656,7 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
> dpu_hw_ctl_update_pending_flush_intf_v1;
> ops->update_pending_flush_merge_3d =
> dpu_hw_ctl_update_pending_flush_merge_3d_v1;
> + ops->update_pending_flush_wb = dpu_hw_ctl_update_pending_flush_wb_v1;
Do we also need the update_pending_flush_wb for non-ACTIVE_CTL case? I
think we do.
> } else {
> ops->trigger_flush = dpu_hw_ctl_trigger_flush;
> ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index c61a8fd..df8f8e9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -1,5 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0-only */
> -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> +/* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> */
>
> #ifndef _DPU_HW_CTL_H
> @@ -44,6 +45,7 @@ struct dpu_hw_stage_cfg {
> */
> struct dpu_hw_intf_cfg {
> enum dpu_intf intf;
> + enum dpu_wb wb;
> enum dpu_3d_blend_mode mode_3d;
> enum dpu_merge_3d merge_3d;
> enum dpu_ctl_mode_sel intf_mode_sel;
> @@ -102,6 +104,15 @@ struct dpu_hw_ctl_ops {
> u32 flushbits);
>
> /**
> + * OR in the given flushbits to the cached pending_(wb_)flush_mask
> + * No effect on hardware
> + * @ctx : ctl path ctx pointer
> + * @blk : writeback block index
> + */
> + void (*update_pending_flush_wb)(struct dpu_hw_ctl *ctx,
> + enum dpu_wb blk);
> +
> + /**
> * OR in the given flushbits to the cached pending_(intf_)flush_mask
> * No effect on hardware
> * @ctx : ctl path ctx pointer
> @@ -199,6 +210,7 @@ struct dpu_hw_ctl_ops {
> * @mixer_hw_caps: mixer hardware capabilities
> * @pending_flush_mask: storage for pending ctl_flush managed via ops
> * @pending_intf_flush_mask: pending INTF flush
> + * @pending_wb_flush_mask: pending WB flush
> * @ops: operation list
> */
> struct dpu_hw_ctl {
> @@ -212,6 +224,7 @@ struct dpu_hw_ctl {
> const struct dpu_lm_cfg *mixer_hw_caps;
> u32 pending_flush_mask;
> u32 pending_intf_flush_mask;
> + u32 pending_wb_flush_mask;
> u32 pending_merge_3d_flush_mask;
>
> /* ops */
--
With best wishes
Dmitry
More information about the Freedreno
mailing list