[Freedreno] [PATCH v2 06/17] drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks
Abhinav Kumar
quic_abhinavk at quicinc.com
Wed Apr 20 17:01:53 UTC 2022
On 4/20/2022 12:20 AM, Dmitry Baryshkov wrote:
> On 20/04/2022 04:45, Abhinav Kumar wrote:
>> Add the dpu_hw_wb abstraction to program registers related to the
>> writeback block. These will be invoked once all the configuration
>> is set and ready to be programmed to the registers.
>>
>> changes in v2:
>> - remove multiple empty lines at the end of the file
>> - change dpu_hw_wb_bind_pingpong_blk to preserve upper bits
>>
>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>
> It's still Reviewed-by, few nits below.
>
>> ---
>> drivers/gpu/drm/msm/Makefile | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 273
>> ++++++++++++++++++++++++++++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h | 131 ++++++++++++++
>> 3 files changed, 405 insertions(+)
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index d5ca2e6..ca779c1 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -74,6 +74,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>> disp/dpu1/dpu_hw_top.o \
>> disp/dpu1/dpu_hw_util.o \
>> disp/dpu1/dpu_hw_vbif.o \
>> + disp/dpu1/dpu_hw_wb.o \
>> disp/dpu1/dpu_kms.o \
>> disp/dpu1/dpu_plane.o \
>> disp/dpu1/dpu_rm.o \
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> new file mode 100644
>> index 0000000..afa8aab
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c
>> @@ -0,0 +1,273 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> + /*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>> reserved
>> + */
>> +
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hwio.h"
>> +#include "dpu_hw_catalog.h"
>> +#include "dpu_hw_wb.h"
>> +#include "dpu_formats.h"
>> +#include "dpu_kms.h"
>> +
>> +#define WB_DST_FORMAT 0x000
>> +#define WB_DST_OP_MODE 0x004
>> +#define WB_DST_PACK_PATTERN 0x008
>> +#define WB_DST0_ADDR 0x00C
>> +#define WB_DST1_ADDR 0x010
>> +#define WB_DST2_ADDR 0x014
>> +#define WB_DST3_ADDR 0x018
>> +#define WB_DST_YSTRIDE0 0x01C
>> +#define WB_DST_YSTRIDE1 0x020
>> +#define WB_DST_YSTRIDE1 0x020
>> +#define WB_DST_DITHER_BITDEPTH 0x024
>> +#define WB_DST_MATRIX_ROW0 0x030
>> +#define WB_DST_MATRIX_ROW1 0x034
>> +#define WB_DST_MATRIX_ROW2 0x038
>> +#define WB_DST_MATRIX_ROW3 0x03C
>> +#define WB_DST_WRITE_CONFIG 0x048
>> +#define WB_ROTATION_DNSCALER 0x050
>> +#define WB_ROTATOR_PIPE_DOWNSCALER 0x054
>> +#define WB_N16_INIT_PHASE_X_C03 0x060
>> +#define WB_N16_INIT_PHASE_X_C12 0x064
>> +#define WB_N16_INIT_PHASE_Y_C03 0x068
>> +#define WB_N16_INIT_PHASE_Y_C12 0x06C
>> +#define WB_OUT_SIZE 0x074
>> +#define WB_ALPHA_X_VALUE 0x078
>> +#define WB_DANGER_LUT 0x084
>> +#define WB_SAFE_LUT 0x088
>> +#define WB_QOS_CTRL 0x090
>> +#define WB_CREQ_LUT_0 0x098
>> +#define WB_CREQ_LUT_1 0x09C
>> +#define WB_UBWC_STATIC_CTRL 0x144
>> +#define WB_MUX 0x150
>> +#define WB_CROP_CTRL 0x154
>> +#define WB_CROP_OFFSET 0x158
>> +#define WB_CSC_BASE 0x260
>> +#define WB_DST_ADDR_SW_STATUS 0x2B0
>> +#define WB_CDP_CNTL 0x2B4
>> +#define WB_OUT_IMAGE_SIZE 0x2C0
>> +#define WB_OUT_XY 0x2C4
>> +
>> +/* WB_QOS_CTRL */
>> +#define WB_QOS_CTRL_DANGER_SAFE_EN BIT(0)
>> +
>> +static const struct dpu_wb_cfg *_wb_offset(enum dpu_wb wb,
>> + const struct dpu_mdss_cfg *m, void __iomem *addr,
>> + struct dpu_hw_blk_reg_map *b)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < m->wb_count; i++) {
>> + if (wb == m->wb[i].id) {
>> + b->base_off = addr;
>> + b->blk_off = m->wb[i].base;
>> + b->length = m->wb[i].len;
>> + b->hwversion = m->hwversion;
>> + return &m->wb[i];
>> + }
>> + }
>> + return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void dpu_hw_wb_setup_outaddress(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cfg *data)
>> +{
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> +
>> + DPU_REG_WRITE(c, WB_DST0_ADDR, data->dest.plane_addr[0]);
>> + DPU_REG_WRITE(c, WB_DST1_ADDR, data->dest.plane_addr[1]);
>> + DPU_REG_WRITE(c, WB_DST2_ADDR, data->dest.plane_addr[2]);
>> + DPU_REG_WRITE(c, WB_DST3_ADDR, data->dest.plane_addr[3]);
>> +}
>> +
>> +static void dpu_hw_wb_setup_format(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cfg *data)
>> +{
>
> This function shares significant logic with dpu_hw_sspp_setup_format().
>
> We should consider splitting the common code to the helper at some point
> (later).
Agreed, I do see some similarities. Will take this up in another change.
>
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> + const struct dpu_format *fmt = data->dest.format;
>> + u32 dst_format, pattern, ystride0, ystride1, outsize, chroma_samp;
>> + u32 write_config = 0;
>> + u32 opmode = 0;
>> + u32 dst_addr_sw = 0;
>> +
>> + chroma_samp = fmt->chroma_sample;
>> +
>> + dst_format = (chroma_samp << 23) |
>> + (fmt->fetch_planes << 19) |
>> + (fmt->bits[C3_ALPHA] << 6) |
>> + (fmt->bits[C2_R_Cr] << 4) |
>> + (fmt->bits[C1_B_Cb] << 2) |
>> + (fmt->bits[C0_G_Y] << 0);
>> +
>> + if (fmt->bits[C3_ALPHA] || fmt->alpha_enable) {
>> + dst_format |= BIT(8); /* DSTC3_EN */
>> + if (!fmt->alpha_enable ||
>> + !(ctx->caps->features & BIT(DPU_WB_PIPE_ALPHA)))
>> + dst_format |= BIT(14); /* DST_ALPHA_X */
>> + }
>> +
>> + pattern = (fmt->element[3] << 24) |
>> + (fmt->element[2] << 16) |
>> + (fmt->element[1] << 8) |
>> + (fmt->element[0] << 0);
>> +
>> + dst_format |= (fmt->unpack_align_msb << 18) |
>> + (fmt->unpack_tight << 17) |
>> + ((fmt->unpack_count - 1) << 12) |
>> + ((fmt->bpp - 1) << 9);
>> +
>> + ystride0 = data->dest.plane_pitch[0] |
>> + (data->dest.plane_pitch[1] << 16);
>> + ystride1 = data->dest.plane_pitch[2] |
>> + (data->dest.plane_pitch[3] << 16);
>> +
>> + if (drm_rect_height(&data->roi) && drm_rect_width(&data->roi))
>> + outsize = (drm_rect_height(&data->roi) << 16) |
>> drm_rect_width(&data->roi);
>> + else
>> + outsize = (data->dest.height << 16) | data->dest.width;
>> +
>> + DPU_REG_WRITE(c, WB_ALPHA_X_VALUE, 0xFF);
>> + DPU_REG_WRITE(c, WB_DST_FORMAT, dst_format);
>> + DPU_REG_WRITE(c, WB_DST_OP_MODE, opmode);
>> + DPU_REG_WRITE(c, WB_DST_PACK_PATTERN, pattern);
>> + DPU_REG_WRITE(c, WB_DST_YSTRIDE0, ystride0);
>> + DPU_REG_WRITE(c, WB_DST_YSTRIDE1, ystride1);
>> + DPU_REG_WRITE(c, WB_OUT_SIZE, outsize);
>> + DPU_REG_WRITE(c, WB_DST_WRITE_CONFIG, write_config);
>> + DPU_REG_WRITE(c, WB_DST_ADDR_SW_STATUS, dst_addr_sw);
>> +}
>> +
>> +static void dpu_hw_wb_roi(struct dpu_hw_wb *ctx, struct dpu_hw_wb_cfg
>> *wb)
>> +{
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> + u32 image_size, out_size, out_xy;
>> +
>> + image_size = (wb->dest.height << 16) | wb->dest.width;
>> + out_xy = 0;
>> + out_size = (drm_rect_height(&wb->roi) << 16) |
>> drm_rect_width(&wb->roi);
>> +
>> + DPU_REG_WRITE(c, WB_OUT_IMAGE_SIZE, image_size);
>> + DPU_REG_WRITE(c, WB_OUT_XY, out_xy);
>> + DPU_REG_WRITE(c, WB_OUT_SIZE, out_size);
>> +}
>> +
>> +static void dpu_hw_wb_setup_qos_lut(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_qos_cfg *cfg)
> I like the single call approach. Maybe we should adopt it for the SSPP
> QoS LUT too.
Perhaps yes.
I had an overall question on this. all the dpu_hw_*** APIs accept their
own unique ctx (which is the *** hardware they are programming). What is
the approach you are suggesting to unify these?
For helper calls I understood and already have addressed it in this series.
But looking ahead for dpu_hw_*** calls, I am still unclear on the
unification plan.
Again, this is for a follow-up change but I am just trying to understand it.
>
>> +{
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> + u32 qos_ctrl = 0;
>> +
>> + if (!ctx || !cfg)
>> + return;
>> +
>> + DPU_REG_WRITE(c, WB_DANGER_LUT, cfg->danger_lut);
>> + DPU_REG_WRITE(c, WB_SAFE_LUT, cfg->safe_lut);
>> +
>> + if (ctx->caps && test_bit(DPU_WB_QOS_8LVL, &ctx->caps->features)) {
>> + DPU_REG_WRITE(c, WB_CREQ_LUT_0, cfg->creq_lut);
>> + DPU_REG_WRITE(c, WB_CREQ_LUT_1, cfg->creq_lut >> 32);
>> + }
>
> Is there a plain WB_CREQ_LUT for the non-8LVL case?
>
>> +
>> + if (cfg->danger_safe_en)
>> + qos_ctrl |= WB_QOS_CTRL_DANGER_SAFE_EN;
>> +
>> + DPU_REG_WRITE(c, WB_QOS_CTRL, qos_ctrl);
>> +}
>> +
>> +static void dpu_hw_wb_setup_cdp(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cdp_cfg *cfg)
>
> Can we use dpu_hw_pipe_cdp_cfg here? Maybe after renaming it to more
> generic dpu_hw_cdp_cfg.
ack, I can absorb this in this series itself and re-spin this.
It will save us one more new structure.
>
>> +{
>> + struct dpu_hw_blk_reg_map *c;
>> + u32 cdp_cntl = 0;
>> +
>> + if (!ctx || !cfg)
>> + return;
>> +
>> + c = &ctx->hw;
>> +
>> + if (cfg->enable)
>> + cdp_cntl |= BIT(0);
>> + if (cfg->ubwc_meta_enable)
>> + cdp_cntl |= BIT(1);
>> + if (cfg->preload_ahead == DPU_WB_CDP_PRELOAD_AHEAD_64)
>> + cdp_cntl |= BIT(3);
>> +
>> + DPU_REG_WRITE(c, WB_CDP_CNTL, cdp_cntl);
>> +}
>> +
>> +static void dpu_hw_wb_bind_pingpong_blk(
>> + struct dpu_hw_wb *ctx,
>> + bool enable, const enum dpu_pingpong pp)
>> +{
>> + struct dpu_hw_blk_reg_map *c;
>> + int mux_cfg;
>> +
>> + if (!ctx)
>> + return;
>> +
>> + c = &ctx->hw;
>> +
>> + mux_cfg = DPU_REG_READ(c, WB_MUX);
>> + mux_cfg &= ~0xf;
>> +
>> + if (enable)
>> + mux_cfg |= (pp - PINGPONG_0) & 0x7;
>> + else
>> + mux_cfg |= 0xf;
>> +
>> + DPU_REG_WRITE(c, WB_MUX, mux_cfg);
>> +}
>> +
>> +static void _setup_wb_ops(struct dpu_hw_wb_ops *ops,
>> + unsigned long features)
>> +{
>> + ops->setup_outaddress = dpu_hw_wb_setup_outaddress;
>> + ops->setup_outformat = dpu_hw_wb_setup_format;
>> +
>> + if (test_bit(DPU_WB_XY_ROI_OFFSET, &features))
>> + ops->setup_roi = dpu_hw_wb_roi;
>> +
>> + if (test_bit(DPU_WB_QOS, &features))
>> + ops->setup_qos_lut = dpu_hw_wb_setup_qos_lut;
>> +
>> + if (test_bit(DPU_WB_CDP, &features))
>> + ops->setup_cdp = dpu_hw_wb_setup_cdp;
>> +
>> + if (test_bit(DPU_WB_INPUT_CTRL, &features))
>> + ops->bind_pingpong_blk = dpu_hw_wb_bind_pingpong_blk;
>> +}
>> +
>> +struct dpu_hw_wb *dpu_hw_wb_init(enum dpu_wb idx,
>> + void __iomem *addr, const struct dpu_mdss_cfg *m)
>> +{
>> + struct dpu_hw_wb *c;
>> + const struct dpu_wb_cfg *cfg;
>> +
>> + if (!addr || !m)
>> + return ERR_PTR(-EINVAL);
>> +
>> + c = kzalloc(sizeof(*c), GFP_KERNEL);
>> + if (!c)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + cfg = _wb_offset(idx, m, addr, &c->hw);
>> + if (IS_ERR(cfg)) {
>> + WARN(1, "Unable to find wb idx=%d\n", idx);
>> + kfree(c);
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + /* Assign ops */
>> + c->mdp = &m->mdp[0];
>> + c->idx = idx;
>> + c->caps = cfg;
>> + _setup_wb_ops(&c->ops, c->caps->features);
>> +
>> + return c;
>> +}
>> +
>> +void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb)
>> +{
>> + kfree(hw_wb);
>> +}
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> new file mode 100644
>> index 0000000..80def96
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h
>> @@ -0,0 +1,131 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>> reserved
>> + */
>> +
>> +#ifndef _DPU_HW_WB_H
>> +#define _DPU_HW_WB_H
>> +
>> +#include "dpu_hw_catalog.h"
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hw_top.h"
>> +#include "dpu_hw_util.h"
>> +#include "dpu_hw_pingpong.h"
>> +
>> +struct dpu_hw_wb;
>> +
>> +struct dpu_hw_wb_cfg {
>> + struct dpu_hw_fmt_layout dest;
>> + enum dpu_intf_mode intf_mode;
>> + struct drm_rect roi;
>> + struct drm_rect crop;
>> +};
>> +
>> +/**
>> + * enum CDP preload ahead address size
>> + */
>> +enum {
>> + DPU_WB_CDP_PRELOAD_AHEAD_32,
>> + DPU_WB_CDP_PRELOAD_AHEAD_64
>> +};
>> +
>> +/**
>> + * struct dpu_hw_wb_cdp_cfg : CDP configuration
>> + * @enable: true to enable CDP
>> + * @ubwc_meta_enable: true to enable ubwc metadata preload
>> + * @tile_amortize_enable: true to enable amortization control for
>> tile format
>> + * @preload_ahead: number of request to preload ahead
>> + * SDE_WB_CDP_PRELOAD_AHEAD_32,
>> + * SDE_WB_CDP_PRELOAD_AHEAD_64
>> + */
>> +struct dpu_hw_wb_cdp_cfg {
>> + bool enable;
>> + bool ubwc_meta_enable;
>> + bool tile_amortize_enable;
>> + u32 preload_ahead;
>> +};
>> +
>> +/**
>> + * struct dpu_hw_wb_qos_cfg : Writeback pipe QoS configuration
>> + * @danger_lut: LUT for generate danger level based on fill level
>> + * @safe_lut: LUT for generate safe level based on fill level
>> + * @creq_lut: LUT for generate creq level based on fill level
>> + * @danger_safe_en: enable danger safe generation
>> + */
>> +struct dpu_hw_wb_qos_cfg {
>> + u32 danger_lut;
>> + u32 safe_lut;
>> + u64 creq_lut;
>> + bool danger_safe_en;
>> +};
>> +
>> +/**
>> + *
>> + * struct dpu_hw_wb_ops : Interface to the wb hw driver functions
>> + * Assumption is these functions will be called after clocks are
>> enabled
>> + * @setup_outaddress: setup output address from the writeback job
>> + * @setup_outformat: setup output format of writeback block from
>> writeback job
>> + * @setup_qos_lut: setup qos LUT for writeback block based on input
>> + * @setup_cdp: setup chroma down prefetch block for writeback
>> block
>> + * @bind_pingpong_blk: enable/disable the connection with ping-pong
>> block
>> + */
>> +struct dpu_hw_wb_ops {
>> + void (*setup_outaddress)(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cfg *wb);
>> +
>> + void (*setup_outformat)(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cfg *wb);
>> +
>> + void (*setup_roi)(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cfg *wb);
>> +
>> + void (*setup_qos_lut)(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_qos_cfg *cfg);
>> +
>> + void (*setup_cdp)(struct dpu_hw_wb *ctx,
>> + struct dpu_hw_wb_cdp_cfg *cfg);
>> +
>> + void (*bind_pingpong_blk)(struct dpu_hw_wb *ctx,
>> + bool enable, const enum dpu_pingpong pp);
>> +};
>> +
>> +/**
>> + * struct dpu_hw_wb : WB driver object
>> + * @hw: block hardware details
>> + * @mdp: pointer to associated mdp portion of the catalog
>> + * @idx: hardware index number within type
>> + * @wb_hw_caps: hardware capabilities
>> + * @ops: function pointers
>> + * @hw_mdp: MDP top level hardware block
>> + */
>> +struct dpu_hw_wb {
>> + struct dpu_hw_blk_reg_map hw;
>> + const struct dpu_mdp_cfg *mdp;
>> +
>> + /* wb path */
>> + int idx;
>> + const struct dpu_wb_cfg *caps;
>> +
>> + /* ops */
>> + struct dpu_hw_wb_ops ops;
>> +
>> + struct dpu_hw_mdp *hw_mdp;
>> +};
>> +
>> +/**
>> + * dpu_hw_wb_init(): Initializes and return writeback hw driver object.
>> + * @idx: wb_path index for which driver object is required
>> + * @addr: mapped register io address of MDP
>> + * @m : pointer to mdss catalog data
>> + */
>> +struct dpu_hw_wb *dpu_hw_wb_init(enum dpu_wb idx,
>> + void __iomem *addr,
>> + const struct dpu_mdss_cfg *m);
>> +
>> +/**
>> + * dpu_hw_wb_destroy(): Destroy writeback hw driver object.
>> + * @hw_wb: Pointer to writeback hw driver object
>> + */
>> +void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb);
>> +
>> +#endif /*_DPU_HW_WB_H */
>
>
More information about the Freedreno
mailing list