[Freedreno] [RFC 2/4] drm/msm/dpu: start using wb_idx in dpu_encoder_phys_wb

Abhinav Kumar quic_abhinavk at quicinc.com
Thu Apr 21 20:48:30 UTC 2022


Convert all the usages of intf_idx to wb_idx in
dpu_encoder_phys_wb.

Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index 563ca08..cb5c7da 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -250,7 +250,7 @@ static int dpu_encoder_phys_wb_atomic_check(
 	const struct drm_display_mode *mode;
 
 	DPU_DEBUG("[atomic_check:%d, \"%s\",%d,%d]\n",
-			phys_enc->intf_idx, mode->name, mode->hdisplay, mode->vdisplay);
+			phys_enc->wb_idx, mode->name, mode->hdisplay, mode->vdisplay);
 
 	if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
 		return 0;
@@ -584,7 +584,7 @@ static void dpu_encoder_phys_wb_disable(struct dpu_encoder_phys *phys_enc)
  */
 static void dpu_encoder_phys_wb_destroy(struct dpu_encoder_phys *phys_enc)
 {
-	DPU_DEBUG("[wb:%d]\n", phys_enc->intf_idx - INTF_0);
+	DPU_DEBUG("[wb:%d]\n", phys_enc->wb_idx - WB_0);
 
 	if (!phys_enc)
 		return;
@@ -730,7 +730,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
 
 	phys_enc = &wb_enc->base;
 	phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
-	phys_enc->intf_idx = p->intf_idx;
+	phys_enc->wb_idx = p->wb_idx;
 
 	dpu_encoder_phys_wb_init_ops(&phys_enc->ops);
 	phys_enc->parent = p->parent;
@@ -738,7 +738,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
 	phys_enc->dpu_kms = p->dpu_kms;
 	phys_enc->split_role = p->split_role;
 	phys_enc->intf_mode = INTF_MODE_WB_LINE;
-	phys_enc->intf_idx = p->intf_idx;
+	phys_enc->wb_idx = p->wb_idx;
 	phys_enc->enc_spinlock = p->enc_spinlock;
 
 	atomic_set(&wb_enc->wbirq_refcount, 0);
@@ -754,7 +754,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_wb_init(
 	phys_enc->enable_state = DPU_ENC_DISABLED;
 
 	DPU_DEBUG("Created dpu_encoder_phys for wb %d\n",
-			phys_enc->intf_idx);
+			phys_enc->wb_idx);
 
 	return phys_enc;
 
-- 
2.7.4



More information about the Freedreno mailing list