[Freedreno] [PATCH] drm/msm/dp: move add fail safe mode to dp_connector_get_mode()
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Apr 23 00:07:51 UTC 2022
On 23/04/2022 02:45, Kuogee Hsieh wrote:
> Current DP driver implementation has adding safe mode done at
> dp_hpd_plug_handle() which is expected to be executed under event
> thread context.
>
> However there is possible circular locking happen (see blow stack trace)
> after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
> is executed under drm_thread context.
>
> To break this circular locking, this patch have safe mode added at
> dp_connector_get_mode() which is executed under drm thread context.
> Therefore no lock acquired required for &dev->mode_config.mutex while
> adding fail safe mode since it has been hold by drm thread already.
>
> ======================================================
> WARNING: possible circular locking dependency detected
> 5.15.35-lockdep #6 Tainted: G W
> ------------------------------------------------------
> frecon/429 is trying to acquire lock:
> ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
> dp_panel_add_fail_safe_mode+0x4c/0xa0
>
> but task is already holding lock:
> ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #3 (&kms->commit_lock[i]){+.+.}-{3:3}:
> __mutex_lock_common+0x174/0x1a64
> mutex_lock_nested+0x98/0xac
> lock_crtcs+0xb4/0x124
> msm_atomic_commit_tail+0x330/0x748
> commit_tail+0x19c/0x278
> drm_atomic_helper_commit+0x1dc/0x1f0
> drm_atomic_commit+0xc0/0xd8
> drm_atomic_helper_set_config+0xb4/0x134
> drm_mode_setcrtc+0x688/0x1248
> drm_ioctl_kernel+0x1e4/0x338
> drm_ioctl+0x3a4/0x684
> __arm64_sys_ioctl+0x118/0x154
> invoke_syscall+0x78/0x224
> el0_svc_common+0x178/0x200
> do_el0_svc+0x94/0x13c
> el0_svc+0x5c/0xec
> el0t_64_sync_handler+0x78/0x108
> el0t_64_sync+0x1a4/0x1a8
>
> -> #2 (crtc_ww_class_mutex){+.+.}-{3:3}:
> __mutex_lock_common+0x174/0x1a64
> ww_mutex_lock+0xb8/0x278
> modeset_lock+0x304/0x4ac
> drm_modeset_lock+0x4c/0x7c
> drmm_mode_config_init+0x4a8/0xc50
> msm_drm_init+0x274/0xac0
> msm_drm_bind+0x20/0x2c
> try_to_bring_up_master+0x3dc/0x470
> __component_add+0x18c/0x3c0
> component_add+0x1c/0x28
> dp_display_probe+0x954/0xa98
> platform_probe+0x124/0x15c
> really_probe+0x1b0/0x5f8
> __driver_probe_device+0x174/0x20c
> driver_probe_device+0x70/0x134
> __device_attach_driver+0x130/0x1d0
> bus_for_each_drv+0xfc/0x14c
> __device_attach+0x1bc/0x2bc
> device_initial_probe+0x1c/0x28
> bus_probe_device+0x94/0x178
> deferred_probe_work_func+0x1a4/0x1f0
> process_one_work+0x5d4/0x9dc
> worker_thread+0x898/0xccc
> kthread+0x2d4/0x3d4
> ret_from_fork+0x10/0x20
>
> -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
> ww_acquire_init+0x1c4/0x2c8
> drm_modeset_acquire_init+0x44/0xc8
> drm_helper_probe_single_connector_modes+0xb0/0x12dc
> drm_mode_getconnector+0x5dc/0xfe8
> drm_ioctl_kernel+0x1e4/0x338
> drm_ioctl+0x3a4/0x684
> __arm64_sys_ioctl+0x118/0x154
> invoke_syscall+0x78/0x224
> el0_svc_common+0x178/0x200
> do_el0_svc+0x94/0x13c
> el0_svc+0x5c/0xec
> el0t_64_sync_handler+0x78/0x108
> el0t_64_sync+0x1a4/0x1a8
>
> -> #0 (&dev->mode_config.mutex){+.+.}-{3:3}:
> __lock_acquire+0x2650/0x672c
> lock_acquire+0x1b4/0x4ac
> __mutex_lock_common+0x174/0x1a64
> mutex_lock_nested+0x98/0xac
> dp_panel_add_fail_safe_mode+0x4c/0xa0
> dp_hpd_plug_handle+0x1f0/0x280
> dp_bridge_enable+0x94/0x2b8
> drm_atomic_bridge_chain_enable+0x11c/0x168
> drm_atomic_helper_commit_modeset_enables+0x500/0x740
> msm_atomic_commit_tail+0x3e4/0x748
> commit_tail+0x19c/0x278
> drm_atomic_helper_commit+0x1dc/0x1f0
> drm_atomic_commit+0xc0/0xd8
> drm_atomic_helper_set_config+0xb4/0x134
> drm_mode_setcrtc+0x688/0x1248
> drm_ioctl_kernel+0x1e4/0x338
> drm_ioctl+0x3a4/0x684
> __arm64_sys_ioctl+0x118/0x154
> invoke_syscall+0x78/0x224
> el0_svc_common+0x178/0x200
> do_el0_svc+0x94/0x13c
> el0_svc+0x5c/0xec
> el0t_64_sync_handler+0x78/0x108
> el0t_64_sync+0x1a4/0x1a8
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 6 ------
> drivers/gpu/drm/msm/dp/dp_panel.c | 23 +++++++++++++----------
> 2 files changed, 13 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 92cd50f..01453db 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -555,12 +555,6 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
>
> mutex_unlock(&dp->event_mutex);
>
> - /*
> - * add fail safe mode outside event_mutex scope
> - * to avoid potiential circular lock with drm thread
> - */
> - dp_panel_add_fail_safe_mode(dp->dp_display.connector);
> -
> /* uevent will complete connection part */
> return 0;
> };
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 1aa9aa8c..23fee42 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -151,15 +151,6 @@ static int dp_panel_update_modes(struct drm_connector *connector,
> return rc;
> }
>
> -void dp_panel_add_fail_safe_mode(struct drm_connector *connector)
> -{
> - /* fail safe edid */
> - mutex_lock(&connector->dev->mode_config.mutex);
> - if (drm_add_modes_noedid(connector, 640, 480))
> - drm_set_preferred_mode(connector, 640, 480);
> - mutex_unlock(&connector->dev->mode_config.mutex);
> -}
> -
> int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> struct drm_connector *connector)
> {
> @@ -216,7 +207,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
> goto end;
> }
>
> - dp_panel_add_fail_safe_mode(connector);
> + /* fail safe edid */
> + mutex_lock(&connector->dev->mode_config.mutex);
> + if (drm_add_modes_noedid(connector, 640, 480))
> + drm_set_preferred_mode(connector, 640, 480);
> + mutex_unlock(&connector->dev->mode_config.mutex);
> }
>
> if (panel->aux_cfg_update_done) {
> @@ -266,6 +261,14 @@ int dp_panel_get_modes(struct dp_panel *dp_panel,
> return -EINVAL;
> }
>
> + /*
> + * add fail safe mode (640x480) here
> + * since we are executed in drm_thread context,
> + * no mode_config.mutex acquired required
> + */
> + if (drm_add_modes_noedid(connector, 640, 480))
> + drm_set_preferred_mode(connector, 640, 480);
> +
> if (dp_panel->edid)
> return dp_panel_update_modes(connector, dp_panel->edid);
>
Also, wouldn't calling get_modes() several times make cause adding more
and more 640x480 modes to the modes list?
--
With best wishes
Dmitry
More information about the Freedreno
mailing list