[Freedreno] [PATCH v2] drm/msm/dp: remove fail safe mode related code

[Doug Anderson]

Hi,

On Mon, Apr 25, 2022 at 10:56 PM Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>
> Current DP driver implementation has adding safe mode done at
> dp_hpd_plug_handle() which is expected to be executed under event
> thread context.
>
> However there is possible circular locking happen (see blow stack trace)
> after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
> is executed under drm_thread context.
>
> After review all possibilities methods and as discussed on
> https://patchwork.freedesktop.org/patch/483155/, supporting EDID
> compliance tests in the driver is quite hacky. As seen with other
> vendor drivers, supporting these will be much easier with IGT. Hence
> removing all the related fail safe code for it so that no possibility
> of circular lock will happen.
>
> ======================================================
>  WARNING: possible circular locking dependency detected
>  5.15.35-lockdep #6 Tainted: G        W
>  ------------------------------------------------------
>  frecon/429 is trying to acquire lock:
>  ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
> dp_panel_add_fail_safe_mode+0x4c/0xa0
>
>  but task is already holding lock:
>  ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124
>
>  which lock already depends on the new lock.
>
>  the existing dependency chain (in reverse order) is:
>
>  -> #3 (&kms->commit_lock[i]){+.+.}-{3:3}:
>         __mutex_lock_common+0x174/0x1a64
>         mutex_lock_nested+0x98/0xac
>         lock_crtcs+0xb4/0x124
>         msm_atomic_commit_tail+0x330/0x748
>         commit_tail+0x19c/0x278
>         drm_atomic_helper_commit+0x1dc/0x1f0
>         drm_atomic_commit+0xc0/0xd8
>         drm_atomic_helper_set_config+0xb4/0x134
>         drm_mode_setcrtc+0x688/0x1248
>         drm_ioctl_kernel+0x1e4/0x338
>         drm_ioctl+0x3a4/0x684
>         __arm64_sys_ioctl+0x118/0x154
>         invoke_syscall+0x78/0x224
>         el0_svc_common+0x178/0x200
>         do_el0_svc+0x94/0x13c
>         el0_svc+0x5c/0xec
>         el0t_64_sync_handler+0x78/0x108
>         el0t_64_sync+0x1a4/0x1a8
>
>  -> #2 (crtc_ww_class_mutex){+.+.}-{3:3}:
>         __mutex_lock_common+0x174/0x1a64
>         ww_mutex_lock+0xb8/0x278
>         modeset_lock+0x304/0x4ac
>         drm_modeset_lock+0x4c/0x7c
>         drmm_mode_config_init+0x4a8/0xc50
>         msm_drm_init+0x274/0xac0
>         msm_drm_bind+0x20/0x2c
>         try_to_bring_up_master+0x3dc/0x470
>         __component_add+0x18c/0x3c0
>         component_add+0x1c/0x28
>         dp_display_probe+0x954/0xa98
>         platform_probe+0x124/0x15c
>         really_probe+0x1b0/0x5f8
>         __driver_probe_device+0x174/0x20c
>         driver_probe_device+0x70/0x134
>         __device_attach_driver+0x130/0x1d0
>         bus_for_each_drv+0xfc/0x14c
>         __device_attach+0x1bc/0x2bc
>         device_initial_probe+0x1c/0x28
>         bus_probe_device+0x94/0x178
>         deferred_probe_work_func+0x1a4/0x1f0
>         process_one_work+0x5d4/0x9dc
>         worker_thread+0x898/0xccc
>         kthread+0x2d4/0x3d4
>         ret_from_fork+0x10/0x20
>
>  -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
>         ww_acquire_init+0x1c4/0x2c8
>         drm_modeset_acquire_init+0x44/0xc8
>         drm_helper_probe_single_connector_modes+0xb0/0x12dc
>         drm_mode_getconnector+0x5dc/0xfe8
>         drm_ioctl_kernel+0x1e4/0x338
>         drm_ioctl+0x3a4/0x684
>         __arm64_sys_ioctl+0x118/0x154
>         invoke_syscall+0x78/0x224
>         el0_svc_common+0x178/0x200
>         do_el0_svc+0x94/0x13c
>         el0_svc+0x5c/0xec
>         el0t_64_sync_handler+0x78/0x108
>         el0t_64_sync+0x1a4/0x1a8
>
>  -> #0 (&dev->mode_config.mutex){+.+.}-{3:3}:
>         __lock_acquire+0x2650/0x672c
>         lock_acquire+0x1b4/0x4ac
>         __mutex_lock_common+0x174/0x1a64
>         mutex_lock_nested+0x98/0xac
>         dp_panel_add_fail_safe_mode+0x4c/0xa0
>         dp_hpd_plug_handle+0x1f0/0x280
>         dp_bridge_enable+0x94/0x2b8
>         drm_atomic_bridge_chain_enable+0x11c/0x168
>         drm_atomic_helper_commit_modeset_enables+0x500/0x740
>         msm_atomic_commit_tail+0x3e4/0x748
>         commit_tail+0x19c/0x278
>         drm_atomic_helper_commit+0x1dc/0x1f0
>         drm_atomic_commit+0xc0/0xd8
>         drm_atomic_helper_set_config+0xb4/0x134
>         drm_mode_setcrtc+0x688/0x1248
>         drm_ioctl_kernel+0x1e4/0x338
>         drm_ioctl+0x3a4/0x684
>         __arm64_sys_ioctl+0x118/0x154
>         invoke_syscall+0x78/0x224
>         el0_svc_common+0x178/0x200
>         do_el0_svc+0x94/0x13c
>         el0_svc+0x5c/0xec
>         el0t_64_sync_handler+0x78/0x108
>         el0t_64_sync+0x1a4/0x1a8
>
> Changes in v2:
> -- re text commit title
> -- remove all fail safe mode
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>

Reported-by: Douglas Anderson <dianders at chromium.org>
Fixes: f1b47e6a8df8 ("drm/msm/dp: remove fail safe mode related code")


> @@ -151,15 +151,6 @@ static int dp_panel_update_modes(struct drm_connector *connector,
>         return rc;
>  }
>
> -void dp_panel_add_fail_safe_mode(struct drm_connector *connector)
> -{
> -       /* fail safe edid */
> -       mutex_lock(&connector->dev->mode_config.mutex);
> -       if (drm_add_modes_noedid(connector, 640, 480))
> -               drm_set_preferred_mode(connector, 640, 480);
> -       mutex_unlock(&connector->dev->mode_config.mutex);
> -}

You removed this function but you forgot to remove it from the header
in "drivers/gpu/drm/msm/dp/dp_panel.h"

-Doug