[Freedreno] [v1] drm/msm/disp/dpu1: add support for hierarchical flush for dspp in sc7280
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Aug 4 15:58:45 UTC 2022
On Thu, 4 Aug 2022 at 13:29, Kalyan Thota <quic_kalyant at quicinc.com> wrote:
>
> Flush mechanism for DSPP blocks has changed in sc7280 family, it
> allows individual sub blocks to be flushed in coordination with
> master flush control.
>
> representation: master_flush && (PCC_flush | IGC_flush .. etc )
>
> This change adds necessary support for the above design.
>
> Signed-off-by: Kalyan Thota <quic_kalyant at quicinc.com>
I'd like to land at least patches 6-8 from [1] next cycle. They clean
up the CTL interface. Could you please rebase your patch on top of
them?
[1] https://patchwork.freedesktop.org/series/99909/
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 4 +++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 40 +++++++++++++++++++++++++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 3 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 7 +++++
> 6 files changed, 59 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 7763558..4eca317 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -703,6 +703,10 @@ static void _dpu_crtc_setup_cp_blocks(struct drm_crtc *crtc)
> mixer[i].flush_mask |= ctl->ops.get_bitmask_dspp(ctl,
> mixer[i].hw_dspp->idx);
>
> + if(ctl->ops.set_dspp_hierarchical_flush)
> + ctl->ops.set_dspp_hierarchical_flush(ctl,
> + mixer[i].hw_dspp->idx, DSPP_SUB_PCC);
> +
> /* stage config flush mask */
> ctl->ops.update_pending_flush(ctl, mixer[i].flush_mask);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 021eb2f..3b27a87 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -58,7 +58,10 @@
> (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>
> #define CTL_SC7280_MASK \
> - (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
> + (BIT(DPU_CTL_ACTIVE_CFG) | \
> + BIT(DPU_CTL_FETCH_ACTIVE) | \
> + BIT(DPU_CTL_VM_CFG) | \
> + BIT(DPU_CTL_HIERARCHICAL_FLUSH))
>
> #define MERGE_3D_SM8150_MASK (0)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index b85b24b..7922f6c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -185,6 +185,7 @@ enum {
> * @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
> * @DPU_CTL_FETCH_ACTIVE: Active CTL for fetch HW (SSPPs)
> * @DPU_CTL_VM_CFG: CTL config to support multiple VMs
> + * @DPU_CTL_HIERARCHICAL_FLUSH: CTL config to support hierarchical flush
> * @DPU_CTL_MAX
> */
> enum {
> @@ -192,6 +193,7 @@ enum {
> DPU_CTL_ACTIVE_CFG,
> DPU_CTL_FETCH_ACTIVE,
> DPU_CTL_VM_CFG,
> + DPU_CTL_HIERARCHICAL_FLUSH,
> DPU_CTL_MAX
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 3584f5e..b34fc30 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -28,6 +28,8 @@
> #define CTL_INTF_FLUSH 0x110
> #define CTL_INTF_MASTER 0x134
> #define CTL_FETCH_PIPE_ACTIVE 0x0FC
> +#define CTL_DSPP_0_FLUSH 0x13C
Please change to CTL_DSPP_n_FLUSH(n).
> +
>
> #define CTL_MIXER_BORDER_OUT BIT(24)
> #define CTL_FLUSH_MASK_CTL BIT(17)
> @@ -292,6 +294,36 @@ static uint32_t dpu_hw_ctl_get_bitmask_dspp(struct dpu_hw_ctl *ctx,
> return flushbits;
> }
>
> +static uint32_t dpu_hw_ctl_get_bitmask_dspp_v1(struct dpu_hw_ctl *ctx,
> + enum dpu_dspp dspp)
> +{
> + return BIT(29);
> +}
> +
> +static void dpu_hw_ctl_set_dspp_hierarchical_flush(struct dpu_hw_ctl *ctx,
> + enum dpu_dspp dspp, enum dpu_dspp_sub_blk dspp_sub_blk)
> +{
> + uint32_t flushbits = 0, active = 0;
> +
> + switch (dspp_sub_blk) {
> + case DSPP_SUB_IGC:
> + flushbits = BIT(2);
> + break;
> + case DSPP_SUB_PCC:
> + flushbits = BIT(4);
> + break;
> + case DSPP_SUB_GC:
> + flushbits = BIT(5);
> + break;
> + default:
> + return;
> + }
> +
> + active = DPU_REG_READ(&ctx->hw, CTL_DSPP_0_FLUSH + ((dspp - 1) * 4));
So that this line will be simpler to read.
> +
> + DPU_REG_WRITE(&ctx->hw, CTL_DSPP_0_FLUSH + ((dspp - 1) * 4), active | flushbits);
> +}
> +
> static u32 dpu_hw_ctl_poll_reset_status(struct dpu_hw_ctl *ctx, u32 timeout_us)
> {
> struct dpu_hw_blk_reg_map *c = &ctx->hw;
> @@ -600,7 +632,13 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
> ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
> ops->get_bitmask_sspp = dpu_hw_ctl_get_bitmask_sspp;
> ops->get_bitmask_mixer = dpu_hw_ctl_get_bitmask_mixer;
> - ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp;
> + if (cap & BIT(DPU_CTL_HIERARCHICAL_FLUSH)) {
> + ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp_v1;
We have used _v1 for active CTLs. What is the relationship between
CTL_HIERARCHILCAL_FLUSH and active CTLs?
> + ops->set_dspp_hierarchical_flush = dpu_hw_ctl_set_dspp_hierarchical_flush;
> + } else {
> + ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp;
> + }
> +
> if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
> ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
> };
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index ac15444..8ecab91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -160,6 +160,9 @@ struct dpu_hw_ctl_ops {
> uint32_t (*get_bitmask_dspp)(struct dpu_hw_ctl *ctx,
> enum dpu_dspp blk);
>
> + void (*set_dspp_hierarchical_flush)(struct dpu_hw_ctl *ctx,
> + enum dpu_dspp blk, enum dpu_dspp_sub_blk dspp_sub_blk);
The word "hierarchical" means particular (internal) implementation.
Please change to something like set_dspp_block_flush().
Or with [2] in place, it can be hidden in the
update_pending_flush_dspp() function. Just pass the subblock to the
function and let the dpu_hw_ctl care about it.
[2] https://patchwork.freedesktop.org/patch/473159/?series=99909&rev=1
> +
> /**
> * Set all blend stages to disabled
> * @ctx : ctl path ctx pointer
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index bb9cead..561e2ab 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -166,6 +166,13 @@ enum dpu_dspp {
> DSPP_MAX
> };
>
> +enum dpu_dspp_sub_blk{
> + DSPP_SUB_PCC = 1,
> + DSPP_SUB_IGC,
> + DSPP_SUB_GC,
> + DSPP_SUB_MAX
> +};
I'd prefer if we can use DPU_DSPP_* definitions instead.
> +
> enum dpu_ctl {
> CTL_0 = 1,
> CTL_1,
--
With best wishes
Dmitry
More information about the Freedreno
mailing list