[Freedreno] [PATCH] arm64: dts: qcom: sm8250: move DSI opp table to the dsi0 node

[Caleb Connolly]

On 22/08/2022 20:11, Dmitry Baryshkov wrote:
> It makes no sense to have the OPP table for the DSI controllers in the
> DSI1 PHY node. Move it to more logical dsi0 device node.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Reviewed-by: Caleb Connolly <caleb at connolly.tech>

> ---
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++--------------
>   1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index bc773e210023..5843e46a3164 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3571,6 +3571,25 @@ dsi0_out: endpoint {
>   						};
>   					};
>   				};
> +
> +				dsi_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-187500000 {
> +						opp-hz = /bits/ 64 <187500000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-358000000 {
> +						opp-hz = /bits/ 64 <358000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +				};
>   			};
>
>   			dsi0_phy: dsi-phy at ae94400 {
> @@ -3663,25 +3682,6 @@ dsi1_phy: dsi-phy at ae96400 {
>   				clock-names = "iface", "ref";
>
>   				status = "disabled";
> -
> -				dsi_opp_table: opp-table {
> -					compatible = "operating-points-v2";
> -
> -					opp-187500000 {
> -						opp-hz = /bits/ 64 <187500000>;
> -						required-opps = <&rpmhpd_opp_low_svs>;
> -					};
> -
> -					opp-300000000 {
> -						opp-hz = /bits/ 64 <300000000>;
> -						required-opps = <&rpmhpd_opp_svs>;
> -					};
> -
> -					opp-358000000 {
> -						opp-hz = /bits/ 64 <358000000>;
> -						required-opps = <&rpmhpd_opp_svs_l1>;
> -					};
> -				};
>   			};
>   		};
>
> --
> 2.35.1
>

--
Kind Regards,
Caleb