[Freedreno] [PATCH v3 4/5] arm64: dts: qcom: sm8450-hdk: Add LT9611uxc HDMI bridge

[Krzysztof Kozlowski]

On 23/11/2022 22:07, Dmitry Baryshkov wrote:
> From: Vinod Koul <vkoul at kernel.org>
> 
> Add the LT9611uxc DSI-HDMI bridge and supplies
> 
> Signed-off-by: Vinod Koul <vkoul at kernel.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio at somainline.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 59 +++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 

(...)

>  	vph_pwr: vph-pwr-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vph_pwr";
> @@ -353,6 +375,27 @@ &dispcc {
>  	status = "okay";
>  };
>  
> +&i2c9 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	lt9611_codec: hdmi-bridge at 2b {
> +		compatible = "lontium,lt9611uxc";
> +		reg = <0x2b>;
> +
> +		interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>;
> +
> +		reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
> +
> +		vdd-supply = <&lt9611_1v2>;
> +		vcc-supply = <&lt9611_3v3>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
> +

Drop blank line.

> +	};
> +};
Best regards,
Krzysztof