[Freedreno] [PATCH v3 11/11] arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

[Krzysztof Kozlowski]

On 05/12/2022 17:37, Robert Foss wrote:
> The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.
> 
> In order to toggle the board to enable the HDMI output,
> switch #7 & #8 on the rightmost multi-switch package have
> to be toggled to On.
> 
> Signed-off-by: Robert Foss <robert.foss at linaro.org>

Thank you for your patch. There is something to discuss/improve.

> +
>  &slpi {
>  	status = "okay";
>  	firmware-name = "qcom/sm8350/slpi.mbn";
> @@ -544,4 +633,20 @@ usb_hub_enabled_state: usb-hub-enabled-state {
>  		drive-strength = <2>;
>  		output-low;
>  	};
> +
> +	lt9611_state: lt9611-state {
> +		lt9611_rst_pin {

No underscores in node names.

> +			pins = "gpio48";
> +			function = "normal";
> +
> +			output-high;
> +			input-disable;
> +		};
> +
> +		lt9611_irq_pin {

Ditto

> +			pins = "gpio50";
> +			function = "gpio";
> +			bias-disable;
> +		};
> +	};
>  };

Best regards,
Krzysztof