[Freedreno] [PATCH 2/3] arm64: dts: qcom: sm8150: Add DISPCC node

[Konrad Dybcio]

On 12.12.2022 11:18, Dmitry Baryshkov wrote:
> 
> 
> On 12 December 2022 12:33:13 GMT+03:00, Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
>> Years after the SoC support has been added, it's high time for it to
>> get dispcc going. Add the node to ensure that.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>> ---
>> arch/arm64/boot/dts/qcom/sm8150.dtsi | 26 ++++++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>> index a0c57fb798d3..ff04397777f4 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>> @@ -3579,6 +3579,32 @@ camnoc_virt: interconnect at ac00000 {
>> 			qcom,bcm-voters = <&apps_bcm_voter>;
>> 		};
>>
>> +		dispcc: clock-controller at af00000 {
>> +			compatible = "qcom,sm8150-dispcc";
>> +			reg = <0 0x0af00000 0 0x10000>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
>> +				 <0>,
>> +				 <0>,
>> +				 <0>,
>> +				 <0>,
>> +				 <0>,
>> +				 <0>;
>> +			clock-names = "bi_tcxo",
>> +				      "dsi0_phy_pll_out_byteclk",
>> +				      "dsi0_phy_pll_out_dsiclk",
>> +				      "dsi1_phy_pll_out_byteclk",
>> +				      "dsi1_phy_pll_out_dsiclk",
>> +				      "dp_phy_pll_link_clk",
>> +				      "dp_phy_pll_vco_div_clk";
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +
>> +			power-domains = <&rpmhpd SM8150_MMCX>;
>> +			/* TODO: Maybe rpmhpd_opp_min_svs could work as well? */
>> +			required-opps = <&rpmhpd_opp_low_svs>;
> 
> Is it required for the dispcc, for the DSI or for the dpu? We have stumbled upon the similar issue when working on the 8350, see the latest Robert's patchset.
While I don't have any hard evidence, it seems like it is required for
any "interesting" multimedia components, AFAIU even including video and
camera clocks..

Seems like it's a deep down dependency for a lot of things on this
particular SoC (and likely also on newer ones, remember the initial
mess with 8250 mmcx?)

Konrad
> 
> 
>> +		};
>> +
>> 		pdc: interrupt-controller at b220000 {
>> 			compatible = "qcom,sm8150-pdc", "qcom,pdc";
>> 			reg = <0 0x0b220000 0 0x400>;
>