[Freedreno] [PATCH v4 2/5] arm64: dts: qcom: sc7280: Add support for eDP panel on CRD

[Doug Anderson]

Hi,

On Thu, Feb 10, 2022 at 3:58 AM Sankeerth Billakanti
<quic_sbillaka at quicinc.com> wrote:
>
> +&pm8350c_gpios {
> +       edp_bl_power: edp-bl-power {
> +               pins = "gpio7";
> +               function = "normal";
> +               qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;

As far as I can tell you're lacking:

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

...which is needed to use PMIC_GPIO_STRENGTH_LOW. I'm curious how
you're compiling?