[Freedreno] [PATCH v2 2/2] drm/msm/dpu: Add SC8180x to hw catalog
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Feb 18 00:05:22 UTC 2022
On 16/02/2022 10:19, Abhinav Kumar wrote:
>
>
> On 2/15/2022 9:14 PM, Bjorn Andersson wrote:
>> On Tue 15 Feb 20:38 CST 2022, Abhinav Kumar wrote:
>>
>>>
>>>
>>> On 2/15/2022 6:14 PM, Bjorn Andersson wrote:
>>>> On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote:
>>>>
>>>>>
>>>>>
>>>>> On 2/15/2022 9:28 AM, Bjorn Andersson wrote:
>>>>>> On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote:
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 2/14/2022 8:33 PM, Bjorn Andersson wrote:
>>>>>>>> From: Rob Clark <robdclark at chromium.org>
>>>>>>>>
>>>>>>>> Add SC8180x to the hardware catalog, for initial support for the
>>>>>>>> platform. Due to limitations in the DP driver only one of the
>>>>>>>> four DP
>>>>>>>> interfaces is left enabled.
>>>>>>>>
>>>>>>>> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS
>>>>>>>> flag and
>>>>>>>> the Windows-on-Snapdragon bootloader leaves the widebus bit set,
>>>>>>>> so this
>>>>>>>> is flagged appropriately to ensure widebus is disabled - for now.
>>>>>>>>
>>>>>>>> Signed-off-by: Rob Clark <robdclark at chromium.org>
>>>>>>>> [bjorn: Reworked intf and irq definitions]
>>>>>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
>>>>>>>> ---
>>>>>>>>
>>>>>>>> Changes since v1:
>>>>>>>> - Dropped widebus flag
>>>>>>>>
>>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129
>>>>>>>> ++++++++++++++++++
>>>>>>>> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>>>>>>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>>>>>>>> drivers/gpu/drm/msm/msm_drv.c | 1 +
>>>>>>>> 4 files changed, 132 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>>>>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>>>>>> index aa75991903a6..7ac0fe32df49 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>>>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>>>>>>>> @@ -90,6 +90,17 @@
>>>>>>>> BIT(MDP_INTF3_INTR) | \
>>>>>>>> BIT(MDP_INTF4_INTR))
>>>>>>>> +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
>>>>>>>> + BIT(MDP_SSPP_TOP0_INTR2) | \
>>>>>>>> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
>>>>>>>> + BIT(MDP_INTF0_INTR) | \
>>>>>>>> + BIT(MDP_INTF1_INTR) | \
>>>>>>>> + BIT(MDP_INTF2_INTR) | \
>>>>>>>> + BIT(MDP_INTF3_INTR) | \
>>>>>>>> + BIT(MDP_INTF4_INTR) | \
>>>>>>>> + BIT(MDP_INTF5_INTR) | \
>>>>>>>> + BIT(MDP_AD4_0_INTR) | \
>>>>>>>> + BIT(MDP_AD4_1_INTR))
>>>>>>>> #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024)
>>>>>>>> #define DEFAULT_DPU_LINE_WIDTH 2048
>>>>>>>> @@ -225,6 +236,22 @@ static const struct dpu_caps
>>>>>>>> sm8150_dpu_caps = {
>>>>>>>> .max_vdeci_exp = MAX_VERT_DECIMATION,
>>>>>>>> };
>>>>>>>> +static const struct dpu_caps sc8180x_dpu_caps = {
>>>>>>>> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>>>>>>>> + .max_mixer_blendstages = 0xb,
>>>>>>>> + .qseed_type = DPU_SSPP_SCALER_QSEED3,
>>>>>>>> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
>>>>>>>> + .ubwc_version = DPU_HW_UBWC_VER_30,
>>>>>>>> + .has_src_split = true,
>>>>>>>> + .has_dim_layer = true,
>>>>>>>> + .has_idle_pc = true,
>>>>>>>> + .has_3d_merge = true,
>>>>>>>> + .max_linewidth = 4096,
>>>>>>>> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
>>>>>>>> + .max_hdeci_exp = MAX_HORZ_DECIMATION,
>>>>>>>> + .max_vdeci_exp = MAX_VERT_DECIMATION,
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> static const struct dpu_caps sm8250_dpu_caps = {
>>>>>>>> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>>>>>>>> .max_mixer_blendstages = 0xb,
>>>>>>>> @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg
>>>>>>>> sc7180_mdp[] = {
>>>>>>>> },
>>>>>>>> };
>>>>>>>> +static const struct dpu_mdp_cfg sc8180x_mdp[] = {
>>>>>>>> + {
>>>>>>>> + .name = "top_0", .id = MDP_TOP,
>>>>>>>> + .base = 0x0, .len = 0x45C,
>>>>>>>> + .features = 0,
>>>>>>>> + .highest_bank_bit = 0x3,
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
>>>>>>>> + .reg_off = 0x2AC, .bit_off = 0},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
>>>>>>>> + .reg_off = 0x2B4, .bit_off = 0},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
>>>>>>>> + .reg_off = 0x2BC, .bit_off = 0},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
>>>>>>>> + .reg_off = 0x2C4, .bit_off = 0},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
>>>>>>>> + .reg_off = 0x2AC, .bit_off = 8},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
>>>>>>>> + .reg_off = 0x2B4, .bit_off = 8},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
>>>>>>>> + .reg_off = 0x2BC, .bit_off = 8},
>>>>>>>> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
>>>>>>>> + .reg_off = 0x2C4, .bit_off = 8},
>>>>>>>> + },
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> static const struct dpu_mdp_cfg sm8250_mdp[] = {
>>>>>>>> {
>>>>>>>> .name = "top_0", .id = MDP_TOP,
>>>>>>>> @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg
>>>>>>>> sc7280_intf[] = {
>>>>>>>> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP,
>>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR,
>>>>>>>> 22, 23),
>>>>>>>> };
>>>>>>>> +static const struct dpu_intf_cfg sc8180x_intf[] = {
>>>>>>>> + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP,
>>>>>>>> MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR,
>>>>>>>> 24, 25),
>>>>>>>> + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24,
>>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
>>>>>>>> + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24,
>>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
>>>>>>>> + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy
>>>>>>>> index until this is supported */
>>>>>>>> + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24,
>>>>>>>> INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
>>>>>>>> + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP,
>>>>>>>> MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR,
>>>>>>>> 20, 21),
>>>>>>>> + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP,
>>>>>>>> MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR,
>>>>>>>> 22, 23),
>>>>>>>
>>>>>>> This is a continued discussion from
>>>>>>> https://patchwork.freedesktop.org/patch/474179/.
>>>>>>>
>>>>>>> Shouldnt INTF_5 be marked as INTF_eDP?
>>>>>>>
>>>>>>
>>>>>> Might be, I didn't even know we had an INTF_EDP define...
>>>>>>
>>>>>> Is there any reason to distinguish DP and EDP in the DPU? I see
>>>>>> sc7280
>>>>>> doesn't distinguish the DP and EDP interfaces.
>>>>>>
>>>>>> Regards,
>>>>>> Bjorn
>>>>>>
>>>>>
>>>>> Like I have mentioned in the other patch, I think we have enough
>>>>> confusion
>>>>> between eDP and DP with the common driver. Since DPU does have
>>>>> separate
>>>>> interfaces I think we should fix that.
>>>>>
>>>>> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He
>>>>> referred to
>>>>> your change
>>>>> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5
>>>>> as it was
>>>>> posted earlier and ended up using the same INTF_DP macro. So its
>>>>> turning out
>>>>> to be a cyclical error.
>>>>>
>>>>
>>>> That made me take a second look at the HPG, and sure enough INTF_5 on
>>>> SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in
>>>> SC8280XP.
>>>>
>>>> In SC8180X, INTF_5 is documented as being connected to a eDP (only)
>>>> PHY,
>>>> so perhaps it makes sense to do it there, but for the others its wrong.
>>>>
>>>
>>> Here you are specifying the controller in the catalog.
>>
>> No, I'm specifying the type of the INTF. We then use the type of the
>> intf and the index to match that to a particular DP TX block.
>>
>>> So independent of the PHY thats being used, shouldnt this remain
>>> INTF_eDP?
>>>
>>
>> I don't think it's going to help anyone to say that an interface
>> connected to a PHY that can be either DP or EDP, should be INTF_EDP.
>>
>> People are going to make assumptions in the code such as INTF_EDP does
>> not have audio and then someone designs a board based on SC7280 with DP
>> output where they expect audio. Or assumptions about HPD, panel etc...
Well, eDP links can embed audio streams (like DP links do).
>>
>> I'm not saying that we have all the details figured out on how that's
>> going to be controlled, but until there's a reason to distinguish
>> INTF_DP from INTF_EDP I think we should not make one up. And I don't see
>> that those differences should be hard coded in the DPU driver.
>>
>>
>> If it's confusing to people that DP might be driving an EDP output, then
>> perhaps we can just name it TMDS again? ;)
>
> If you prefer to have TMDS, then like I commented earlier we dont really
> need this change https://patchwork.freedesktop.org/patch/474271/ :)
>
> Whats the benefit of making that change? DRM_ENCODER_TMDS_* can be eDP
> and DP . Then there is no confusion or guess work in the encoder.
>
> DRM_ENCODER_DSI - INTF_DSI
> DRM_ENCODER_VIRTUAL - INTF_WB
> DRM_ENCODER_TMDS - INTF_DP OR INTF_eDP ( doesnt matter )
The benefit for me was in the cleaness that we are asking for the
INTF_DP with index #3 or INTF_DSI idx 1. The less knowledge he have
behind the scenes the better is the code.
>
>>
>> Regards,
>> Bjorn
--
With best wishes
Dmitry
More information about the Freedreno
mailing list