[Freedreno] [PATCH v10 2/4] drm/msm/dpu: replace BIT(x) with correspond marco define string
Kuogee Hsieh
quic_khsieh at quicinc.com
Wed Feb 23 00:27:38 UTC 2022
To improve code readability, this patch replace BIT(x) with
correspond register bit define string
Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Stephen Boyd <swboyd at chromium.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 284f561..c2cd185 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -60,6 +60,12 @@
#define INTF_MUX 0x25C
+#define INTF_CFG_ACTIVE_H_EN BIT(29)
+#define INTF_CFG_ACTIVE_V_EN BIT(30)
+
+#define INTF_CFG2_DATABUS_WIDEN BIT(0)
+#define INTF_CFG2_DATA_HCTL_EN BIT(4)
+
static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
const struct dpu_mdss_cfg *m,
void __iomem *addr,
@@ -130,13 +136,13 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
if (active_h_end) {
active_hctl = (active_h_end << 16) | active_h_start;
- intf_cfg |= BIT(29); /* ACTIVE_H_ENABLE */
+ intf_cfg |= INTF_CFG_ACTIVE_H_EN;
} else {
active_hctl = 0;
}
if (active_v_end)
- intf_cfg |= BIT(30); /* ACTIVE_V_ENABLE */
+ intf_cfg |= INTF_CFG_ACTIVE_V_EN;
hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
display_hctl = (hsync_end_x << 16) | hsync_start_x;
@@ -182,7 +188,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
(0x21 << 8));
if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
- intf_cfg2 |= BIT(4);
+ intf_cfg2 |= INTF_CFG2_DATA_HCTL_EN;
display_data_hctl = display_hctl;
DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the Freedreno
mailing list