[Freedreno] [RFC PATCH v2 4/5] drm/msm/dp: replace dp_connector with drm_bridge_connector

[Stephen Boyd]

Quoting Kuogee Hsieh (2022-02-23 10:27:26)
>
> On 2/23/2022 10:22 AM, Dmitry Baryshkov wrote:
> > On 23/02/2022 20:21, Kuogee Hsieh wrote:
> >
> > In the panel device node.
> >
> > Can you please share it too?
>
>
> &soc {
>          edp_power_supply: edp_power {
>                  compatible = "regulator-fixed";
>                  regulator-name = "edp_backlight_power";
>
>                  regulator-always-on;
>                  regulator-boot-on;
>          };
>
>          edp_backlight: edp_backlight {
>                  compatible = "pwm-backlight";
>
>                  pwms = <&pm8350c_pwm 3 65535>;
>                  power-supply = <&edp_power_supply>;
>                  enable-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
>
>                  pinctrl-names = "default";
>                  pinctrl-0 = <&backlight_pwm_default>;
>          };
>
>          edp_panel: edp_panel {
>                  compatible = "sharp_lq140m1jw46";

Is that supposed to be sharp,lq140m1jw46 with a comma instead of an
underscore?