[Freedreno] [PATCH v14 2/3] phy: qcom-qmp: add regulator_set_load to dp phy
Kuogee Hsieh
quic_khsieh at quicinc.com
Mon Jun 20 20:12:22 UTC 2022
This patch add regulator_set_load() before enable regulator at
DP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
Reviewed-by: Stephen Boyd <swboyd at chromium.org>
Reviewed-by: Douglas Anderson <dianders at chromium.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 40 ++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index c7309e981..e5836ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3119,6 +3119,17 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
};
+/* list of regulators */
+struct qmp_regulator_data {
+ const char *name;
+ unsigned int enable_load;
+};
+
+struct qmp_regulator_data qmp_phy_vreg_l[] = {
+ { .name = "vdda-phy", .enable_load = 21800 },
+ { .name = "vdda-pll", .enable_load = 36000 },
+};
+
struct qmp_phy;
/* struct qmp_phy_cfg - per-PHY initialization config */
@@ -3173,7 +3184,7 @@ struct qmp_phy_cfg {
const char * const *reset_list;
int num_resets;
/* regulators to be requested */
- const char * const *vreg_list;
+ const struct qmp_regulator_data *vreg_list;
int num_vregs;
/* array of registers with different offsets */
@@ -3385,11 +3396,6 @@ static const char * const sdm845_pciephy_reset_l[] = {
"phy",
};
-/* list of regulators */
-static const char * const qmp_phy_vreg_l[] = {
- "vdda-phy", "vdda-pll",
-};
-
static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -5561,16 +5567,32 @@ static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
int num = cfg->num_vregs;
- int i;
+ int ret, i;
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
if (!qmp->vregs)
return -ENOMEM;
for (i = 0; i < num; i++)
- qmp->vregs[i].supply = cfg->vreg_list[i];
+ qmp->vregs[i].supply = cfg->vreg_list[i].name;
- return devm_regulator_bulk_get(dev, num, qmp->vregs);
+ ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
+ if (ret) {
+ dev_err(dev, "failed at devm_regulator_bulk_get\n");
+ return ret;
+ }
+
+ for (i = 0; i < num; i++) {
+ ret = regulator_set_load(qmp->vregs[i].consumer,
+ cfg->vreg_list[i].enable_load);
+ if (ret) {
+ dev_err(dev, "failed to set load at %s\n",
+ qmp->vregs[i].supply);
+ return ret;
+ }
+ }
+
+ return 0;
}
static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the Freedreno
mailing list