[Freedreno] [PATCH v1 2/3] drm/msm/dp: decoupling dp->id out of dp controller_id at scxxxx_dp_cfg table
Abhinav Kumar
quic_abhinavk at quicinc.com
Sat Jun 25 01:15:57 UTC 2022
On 6/24/2022 5:23 PM, Stephen Boyd wrote:
> Quoting Stephen Boyd (2022-06-24 17:11:01)
>> Quoting Abhinav Kumar (2022-06-24 17:03:37)
>>>
>>> So let me try to explain this as this is what i understood from the
>>> patch and how kuogee explained me.
>>>
>>> The ordering of the array still matters here and thats what he is trying
>>> to address with the second change.
>>
>> The order of the array should not matter. That's the problem.
>
> It seems like somewhere else the order of the array matters, presumably
> while setting up encoders?
>
>>
>>>
>>> So as per him, he tried to swap the order of entries like below and that
>>> did not work and that is incorrect behavior because he still retained
>>> the MSM_DP_CONTROLLER_x field for the table like below:
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>>> b/drivers/gpu/drm/msm/dp/dp_display.c
>>> index dcd80c8a794c..7816e82452ca 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>>> @@ -140,8 +140,8 @@ static const struct msm_dp_config sc7180_dp_cfg = {
>>>
>>> static const struct msm_dp_config sc7280_dp_cfg = {
>>> .descs = (const struct msm_dp_desc[]) {
>>> - [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000,
>>> .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
>>> [MSM_DP_CONTROLLER_1] = { .io_start = 0x0aea0000,
>>> .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
>>> + [MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000,
>>> .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
>>> },
>>> .num_descs = 2,
>>> };
>>>
>>>
>>> The reason order is important is because in this function below, even
>>> though it matches the address to find which one to use it loops through
>>> the array and so the value of *id will change depending on which one is
>>> located where.
>>>
>>> static const struct msm_dp_desc *dp_display_get_desc(struct
>>> platform_device *pdev,
>>> unsigned int *id)
>>
>> Thanks! We should fix this function to not overwrite the id.
>>
>
> Ah nevermind. I mixed up dp->id and h_tile_instance thinking one was
> overwriting the other but that doesn't make any sense.
Yes, I also misunderstood one point.
Even if we re-order like above, we are still retaining the index
correctly so that will still work.
I checked with kuogee again now, he mentioned he needs this only for
patch 3.
He is not sure of the root-cause of why turning ON the first display
fixes the issue . I think that needs to be debugged correctly to answers
questions posted by you / Dmitry. Lets hold on these patches till we
have the answers.
More information about the Freedreno
mailing list