[Freedreno] [PATCH 3/3] drm/msm: Expose client engine utilization via fdinfo

[Tvrtko Ursulin]

On 28/02/2022 16:01, Rob Clark wrote:
> On Mon, Feb 28, 2022 at 6:33 AM Tvrtko Ursulin
> <tvrtko.ursulin at linux.intel.com> wrote:
>>
>>
>> On 25/02/2022 22:14, Rob Clark wrote:
>>> On Fri, Feb 25, 2022 at 12:25 PM Rob Clark <robdclark at gmail.com> wrote:
>>>>
>>>> From: Rob Clark <robdclark at chromium.org>
>>>>
>>>> Similar to AMD commit
>>>> 874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the
>>>> infrastructure added in previous patches, we add basic client info
>>>> and GPU engine utilisation for msm.
>>>>
>>>> Example output:
>>>>
>>>>           # cat /proc/`pgrep glmark2`/fdinfo/6
>>>>           pos:    0
>>>>           flags:  02400002
>>>>           mnt_id: 21
>>>>           ino:    162
>>>>           drm-driver:     msm
>>>>           drm-client-id:  7
>>>>           drm-engine-gpu: 1734371319 ns
>>>>           drm-cycles-gpu: 1153645024
>>
>> Nice, so my vendor agnostic actually worked (with that single fixup of
>> accounting for the fact pdev tag is optional)?
>>
>>> Note that it might be useful to have a standardized way to report # of
>>> cycles and max freq, so userspace tool can derive %utilization in
>>> addition to just %busy
>>
>> How do you define %utilisation vs %busy - I don't exactly follow since I
>> see the two as same?
> 
> so, say you are running at 50% of max clk, and gpu is busy 70% of the
> time.  The utilization is only 35% because the gpu could scale up the
> clk to get more work done.

Got it, thanks. I don't think we have the equivalent on the i915 side 
(we do have global frequency reporting via perf/PMU). In general things 
like these I imagined would be defined as driver specific tags. If you 
look at the drm-usage-stats.rst in my series, there is a "Driver 
specific implementations" section in there which links to the i915 doc 
section.

I've also put a "big fat" comment into the i915 fdinfo fops vfunc 
pointing back to drm-usage-stats.rst which I think is useful when large 
teams work on a driver. Not sure if that applies to msm so just mentioning.

Since this all works for you, would you mind applying your ack against 
20220222140422.1121163-9-tvrtko.ursulin at linux.intel.com?

I need to get some updates r-b's for my series and then I submit it 
again to Dave and Daniel for final acks.

After that, for a 2nd/follow-up phase, I plan to re-surrect the amdgpu 
patch I had to make it compliant to common format, plus document the 
option of engine utilisation tag being in percentage units as exposed 
from that driver. And extending gputop to support that as well.

Regards,

Tvrtko

>> Looking at your patch I guess I don't understand the difference between
>> 'elapsed' and 'cycles' inside your retire_submit(). Both are scoped to a
>> single context and are not global? If 'elapsed' is time context has
>> spent on the GPU, cycles isn't the same just in a different unit?
> 
> Correct, we capture (from GPU cmdstream) two counters both before and
> after a submit (aka execbuf) runs, one is a fixed-rate counter, which
> gives us elapsed time.  The second is a counter that increments every
> clk cycle, which gives us the # of cycles.  With the two values, we
> can calculate GPU frequency.
> 
> BR,
> -R
> 
>> Regards,
>>
>> Tvrtko
>>