[Freedreno] [PATCH v2 1/6] arm64: dts: qcom: msm8996: Drop flags for mdss irqs

[Abhinav Kumar]

On 3/2/2022 2:54 PM, Dmitry Baryshkov wrote:
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
> 
> Reviewed-by: Stephen Boyd <swboyd at chromium.org>
> Fixes: 12d540375736 ("arm64: dts: qcom: msm8996: Add DSI0 nodes")
> Fixes: 3a4547c1fc2f ("arm64: qcom: msm8996.dtsi: Add Display nodes")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index f0f81c23c16f..0597d865a4a6 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -788,7 +788,7 @@ mdp: mdp at 901000 {
>   				reg-names = "mdp_phys";
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <0>;
>   
>   				clocks = <&mmcc MDSS_AHB_CLK>,
>   					 <&mmcc MDSS_AXI_CLK>,
> @@ -834,7 +834,7 @@ dsi0: dsi at 994000 {
>   				reg-names = "dsi_ctrl";
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <4>;
>   
>   				clocks = <&mmcc MDSS_MDP_CLK>,
>   					 <&mmcc MDSS_BYTE0_CLK>,
> @@ -904,7 +904,7 @@ hdmi: hdmi-tx at 9a0000 {
>   					    "hdcp_physical";
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <8>;
>   
>   				clocks = <&mmcc MDSS_MDP_CLK>,
>   					 <&mmcc MDSS_AHB_CLK>,