[Freedreno] [PATCH v3 1/3] drm: allow real encoder to be passed for drm_writeback_connector

Liviu Dudau liviu.dudau at arm.com
Mon Mar 21 18:07:13 UTC 2022


On Thu, Mar 17, 2022 at 10:26:38AM -0700, Abhinav Kumar wrote:
> Hi Laurent
> 
> Thanks for the review.
> 
> On 3/17/2022 1:51 AM, Laurent Pinchart wrote:
> > Hi Abhinav,
> > 
> > Thank you for the patch.
> > 
> > On Wed, Mar 16, 2022 at 11:48:16AM -0700, Abhinav Kumar wrote:
> > > For some vendor driver implementations, display hardware can
> > > be shared between the encoder used for writeback and the physical
> > > display.
> > > 
> > > In addition resources such as clocks and interrupts can
> > > also be shared between writeback and the real encoder.
> > > 
> > > To accommodate such vendor drivers and hardware, allow
> > > real encoder to be passed for drm_writeback_connector using a new
> > > drm_writeback_connector_init_with_encoder() API.
> > 
> > The commit message doesn't match the commit.
> Sorry, while splitting the change , I missed this part of the commit text.
> Will fix it up.
> > 
> > > In addition, to preserve the same call flows for the existing
> > > users of drm_writeback_connector_init(), also allow passing
> > > possible_crtcs as a parameter so that encoder can be initialized
> > > with it.
> > > 
> > > changes in v3:
> > > 	- allow passing possible_crtcs for existing users of
> > > 	  drm_writeback_connector_init()
> > > 	- squash the vendor changes into the same commit so
> > > 	  that each patch in the series can compile individually
> > > 
> > > Co-developed-by: Kandpal Suraj <suraj.kandpal at intel.com>
> > > Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> > > ---
> > >   .../drm/arm/display/komeda/komeda_wb_connector.c   |   3 +-
> > >   drivers/gpu/drm/arm/malidp_mw.c                    |   5 +-
> > >   drivers/gpu/drm/drm_writeback.c                    | 103 +++++++++++++--------
> > >   drivers/gpu/drm/rcar-du/rcar_du_writeback.c        |   5 +-
> > >   drivers/gpu/drm/vc4/vc4_txp.c                      |  19 ++--
> > >   drivers/gpu/drm/vkms/vkms_writeback.c              |   3 +-
> > >   include/drm/drm_writeback.h                        |  22 ++++-
> > >   7 files changed, 103 insertions(+), 57 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > > index e465cc4..40774e6 100644
> > > --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > > @@ -155,7 +155,6 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
> > >   	kwb_conn->wb_layer = kcrtc->master->wb_layer;
> > >   	wb_conn = &kwb_conn->base;
> > > -	wb_conn->encoder.possible_crtcs = BIT(drm_crtc_index(&kcrtc->base));
> > >   	formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl,
> > >   					       kwb_conn->wb_layer->layer_type,
> > > @@ -164,7 +163,7 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
> > >   	err = drm_writeback_connector_init(&kms->base, wb_conn,
> > >   					   &komeda_wb_connector_funcs,
> > >   					   &komeda_wb_encoder_helper_funcs,
> > > -					   formats, n_formats);
> > > +					   formats, n_formats, BIT(drm_crtc_index(&kcrtc->base)));
> > >   	komeda_put_fourcc_list(formats);
> > >   	if (err) {
> > >   		kfree(kwb_conn);
> > > diff --git a/drivers/gpu/drm/arm/malidp_mw.c b/drivers/gpu/drm/arm/malidp_mw.c
> > > index f5847a7..b882066 100644
> > > --- a/drivers/gpu/drm/arm/malidp_mw.c
> > > +++ b/drivers/gpu/drm/arm/malidp_mw.c
> > > @@ -208,11 +208,12 @@ int malidp_mw_connector_init(struct drm_device *drm)
> > >   	struct malidp_drm *malidp = drm->dev_private;
> > >   	u32 *formats;
> > >   	int ret, n_formats;
> > > +	uint32_t possible_crtcs;
> > >   	if (!malidp->dev->hw->enable_memwrite)
> > >   		return 0;
> > > -	malidp->mw_connector.encoder.possible_crtcs = 1 << drm_crtc_index(&malidp->crtc);
> > > +	possible_crtcs = 1 << drm_crtc_index(&malidp->crtc);
> > >   	drm_connector_helper_add(&malidp->mw_connector.base,
> > >   				 &malidp_mw_connector_helper_funcs);
> > > @@ -223,7 +224,7 @@ int malidp_mw_connector_init(struct drm_device *drm)
> > >   	ret = drm_writeback_connector_init(drm, &malidp->mw_connector,
> > >   					   &malidp_mw_connector_funcs,
> > >   					   &malidp_mw_encoder_helper_funcs,
> > > -					   formats, n_formats);
> > > +					   formats, n_formats, possible_crtcs);
> > 
> > Do you need the local variable ?
> 
> Yes, we can dtop this. I just used this instead of "1 <<
> drm_crtc_index(&malidp->crtc)" to simplify it.
> No strong preference.
> 
> > 
> > >   	kfree(formats);
> > >   	if (ret)
> > >   		return ret;
> > > diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
> > > index dccf4504..17c1471 100644
> > > --- a/drivers/gpu/drm/drm_writeback.c
> > > +++ b/drivers/gpu/drm/drm_writeback.c
> > > @@ -149,36 +149,15 @@ static const struct drm_encoder_funcs drm_writeback_encoder_funcs = {
> > >   	.destroy = drm_encoder_cleanup,
> > >   };
> > > -/**
> > > - * drm_writeback_connector_init - Initialize a writeback connector and its properties
> > > - * @dev: DRM device
> > > - * @wb_connector: Writeback connector to initialize
> > > - * @con_funcs: Connector funcs vtable
> > > - * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal encoder
> > > - * @formats: Array of supported pixel formats for the writeback engine
> > > - * @n_formats: Length of the formats array
> > > - *
> > > - * This function creates the writeback-connector-specific properties if they
> > > - * have not been already created, initializes the connector as
> > > - * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
> > > - * values. It will also create an internal encoder associated with the
> > > - * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
> > > - * the encoder helper.
> > > - *
> > > - * Drivers should always use this function instead of drm_connector_init() to
> > > - * set up writeback connectors.
> > > - *
> > > - * Returns: 0 on success, or a negative error code
> > > - */
> > > -int drm_writeback_connector_init(struct drm_device *dev,
> > > -				 struct drm_writeback_connector *wb_connector,
> > > -				 const struct drm_connector_funcs *con_funcs,
> > > -				 const struct drm_encoder_helper_funcs *enc_helper_funcs,
> > > -				 const u32 *formats, int n_formats)
> > > +static int drm_writeback_connector_setup(struct drm_device *dev,
> > > +		struct drm_writeback_connector *wb_connector,
> > > +		const struct drm_connector_funcs *con_funcs, const u32 *formats,
> > > +		int n_formats)
> > >   {
> > >   	struct drm_property_blob *blob;
> > > -	struct drm_connector *connector = &wb_connector->base;
> > >   	struct drm_mode_config *config = &dev->mode_config;
> > > +	struct drm_connector *connector = &wb_connector->base;
> > > +
> > >   	int ret = create_writeback_properties(dev);
> > >   	if (ret != 0)
> > > @@ -186,15 +165,10 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > >   	blob = drm_property_create_blob(dev, n_formats * sizeof(*formats),
> > >   					formats);
> > > -	if (IS_ERR(blob))
> > > -		return PTR_ERR(blob);
> > > -
> > > -	drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs);
> > > -	ret = drm_encoder_init(dev, &wb_connector->encoder,
> > > -			       &drm_writeback_encoder_funcs,
> > > -			       DRM_MODE_ENCODER_VIRTUAL, NULL);
> > > -	if (ret)
> > > -		goto fail;
> > > +	if (IS_ERR(blob)) {
> > > +		ret = PTR_ERR(blob);
> > > +		return ret;
> > > +	}
> > >   	connector->interlace_allowed = 0;
> > > @@ -204,7 +178,7 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > >   		goto connector_fail;
> > >   	ret = drm_connector_attach_encoder(connector,
> > > -						&wb_connector->encoder);
> > > +						wb_connector->encoder);
> > >   	if (ret)
> > >   		goto attach_fail;
> > > @@ -233,11 +207,62 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > >   attach_fail:
> > >   	drm_connector_cleanup(connector);
> > >   connector_fail:
> > > -	drm_encoder_cleanup(&wb_connector->encoder);
> > > -fail:
> > >   	drm_property_blob_put(blob);
> > >   	return ret;
> > >   }
> > > +
> > > +/**
> > > + * drm_writeback_connector_init - Initialize a writeback connector and its properties
> > > + * using an internal encoder
> > > + *
> > > + * @dev: DRM device
> > > + * @wb_connector: Writeback connector to initialize
> > > + * @con_funcs: Connector funcs vtable
> > > + * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal encoder
> > > + * @formats: Array of supported pixel formats for the writeback engine
> > > + * @n_formats: Length of the formats array
> > > + * @possible_crtcs: possible crtcs for the internal writeback encoder
> > > + *
> > > + * This function creates the writeback-connector-specific properties if they
> > > + * have not been already created, initializes the connector as
> > > + * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
> > > + * values. It will also create an internal encoder associated with the
> > > + * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
> > > + * the encoder helper.
> > > + *
> > > + * Drivers should always use this function instead of drm_connector_init() to
> > > + * set up writeback connectors.
> > > + *
> > > + * Returns: 0 on success, or a negative error code
> > > + */
> > > +int drm_writeback_connector_init(struct drm_device *dev,
> > > +		struct drm_writeback_connector *wb_connector,
> > > +		const struct drm_connector_funcs *con_funcs,
> > > +		const struct drm_encoder_helper_funcs *enc_helper_funcs,
> > > +		const u32 *formats, int n_formats, uint32_t possible_crtcs)
> > > +{
> > > +	int ret = 0;
> > > +
> > > +	wb_connector->encoder = &wb_connector->internal_encoder;
> > > +
> > > +	drm_encoder_helper_add(wb_connector->encoder, enc_helper_funcs);
> > > +
> > > +	wb_connector->encoder->possible_crtcs = possible_crtcs;
> > > +
> > > +	ret = drm_encoder_init(dev, wb_connector->encoder,
> > > +			       &drm_writeback_encoder_funcs,
> > > +			       DRM_MODE_ENCODER_VIRTUAL, NULL);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	ret = drm_writeback_connector_setup(dev, wb_connector, con_funcs, formats,
> > > +			n_formats);
> > > +
> > > +	if (ret)
> > > +		drm_encoder_cleanup(wb_connector->encoder);
> > > +
> > > +	return ret;
> > > +}
> > 
> > All this doesn't belong to this patch. Just add the possible_crtcs
> > argument to drm_writeback_connector_init() in 1/3, nothing else. One
> > functional change, one patch.
> 
> Ok, so let me re-factor the series like this:
> 
> 1) possible_crtcs argument along with other vendor changes
> 2) changing encoder to a pointer with changes to vc4
> 3) adding a new API drm_writeback_connector_init_with_encoder() with the
> cleanup in the drm_writeback
> 4) changing vc4 to use the new API

I think the order should be 1, 3, 4, 2 (without the vc4 changes).

Best regards,
Liviu

> 
> Let me know what you think.
> 
> > 
> > >   EXPORT_SYMBOL(drm_writeback_connector_init);
> > >   int drm_writeback_set_fb(struct drm_connector_state *conn_state,
> > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> > > index c79d125..1a610c0 100644
> > > --- a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> > > +++ b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> > > @@ -199,8 +199,9 @@ int rcar_du_writeback_init(struct rcar_du_device *rcdu,
> > >   			   struct rcar_du_crtc *rcrtc)
> > >   {
> > >   	struct drm_writeback_connector *wb_conn = &rcrtc->writeback;
> > > +	uint32_t possible_crtcs;
> > > -	wb_conn->encoder.possible_crtcs = 1 << drm_crtc_index(&rcrtc->crtc);
> > > +	possible_crtcs = 1 << drm_crtc_index(&rcrtc->crtc);
> > >   	drm_connector_helper_add(&wb_conn->base,
> > >   				 &rcar_du_wb_conn_helper_funcs);
> > > @@ -208,7 +209,7 @@ int rcar_du_writeback_init(struct rcar_du_device *rcdu,
> > >   					    &rcar_du_wb_conn_funcs,
> > >   					    &rcar_du_wb_enc_helper_funcs,
> > >   					    writeback_formats,
> > > -					    ARRAY_SIZE(writeback_formats));
> > > +					    ARRAY_SIZE(writeback_formats), possible_crtcs);
> > 
> > Same here, do you need the intermediate variable ?
> 
> > 
> > And please add a line break after ARRAY_SIZE().
> Ok will do
> > 
> > >   }
> > >   void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
> > > diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
> > > index 9809ca3..32c4fb0 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_txp.c
> > > +++ b/drivers/gpu/drm/vc4/vc4_txp.c
> > > @@ -151,6 +151,8 @@ struct vc4_txp {
> > >   	struct platform_device *pdev;
> > > +	struct drm_encoder drm_enc;
> > > +
> > >   	struct drm_writeback_connector connector;
> > >   	void __iomem *regs;
> > > @@ -159,7 +161,7 @@ struct vc4_txp {
> > >   static inline struct vc4_txp *encoder_to_vc4_txp(struct drm_encoder *encoder)
> > >   {
> > > -	return container_of(encoder, struct vc4_txp, connector.encoder);
> > > +	return container_of(encoder, struct vc4_txp, drm_enc);
> > >   }
> > >   static inline struct vc4_txp *connector_to_vc4_txp(struct drm_connector *conn)
> > > @@ -467,6 +469,7 @@ static int vc4_txp_bind(struct device *dev, struct device *master, void *data)
> > >   	struct vc4_txp *txp;
> > >   	struct drm_crtc *crtc;
> > >   	struct drm_encoder *encoder;
> > > +	struct drm_writeback_connector *wb_conn;
> > >   	int ret, irq;
> > >   	irq = platform_get_irq(pdev, 0);
> > > @@ -492,12 +495,14 @@ static int vc4_txp_bind(struct device *dev, struct device *master, void *data)
> > >   	txp->regset.regs = txp_regs;
> > >   	txp->regset.nregs = ARRAY_SIZE(txp_regs);
> > > -	drm_connector_helper_add(&txp->connector.base,
> > > +	wb_conn = &txp->connector;
> > > +	wb_conn->encoder = &txp->drm_enc;
> > > +
> > > +	drm_connector_helper_add(&wb_conn->base,
> > >   				 &vc4_txp_connector_helper_funcs);
> > > -	ret = drm_writeback_connector_init(drm, &txp->connector,
> > > -					   &vc4_txp_connector_funcs,
> > > -					   &vc4_txp_encoder_helper_funcs,
> > > -					   drm_fmts, ARRAY_SIZE(drm_fmts));
> > > +	ret = drm_writeback_connector_init(drm, wb_conn,
> > > +			&vc4_txp_connector_funcs, &vc4_txp_encoder_helper_funcs,
> > > +			drm_fmts, ARRAY_SIZE(drm_fmts), 0);
> > 
> > Most of this also doesn't belong to this patch.
> > 
> > >   	if (ret)
> > >   		return ret;
> > > @@ -506,7 +511,7 @@ static int vc4_txp_bind(struct device *dev, struct device *master, void *data)
> > >   	if (ret)
> > >   		return ret;
> > > -	encoder = &txp->connector.encoder;
> > > +	encoder = txp->connector.encoder;
> > >   	encoder->possible_crtcs = drm_crtc_mask(crtc);
> > >   	ret = devm_request_irq(dev, irq, vc4_txp_interrupt, 0,
> > > diff --git a/drivers/gpu/drm/vkms/vkms_writeback.c b/drivers/gpu/drm/vkms/vkms_writeback.c
> > > index 8694227..381e7b7 100644
> > > --- a/drivers/gpu/drm/vkms/vkms_writeback.c
> > > +++ b/drivers/gpu/drm/vkms/vkms_writeback.c
> > > @@ -140,12 +140,11 @@ int vkms_enable_writeback_connector(struct vkms_device *vkmsdev)
> > >   {
> > >   	struct drm_writeback_connector *wb = &vkmsdev->output.wb_connector;
> > > -	vkmsdev->output.wb_connector.encoder.possible_crtcs = 1;
> > >   	drm_connector_helper_add(&wb->base, &vkms_wb_conn_helper_funcs);
> > >   	return drm_writeback_connector_init(&vkmsdev->drm, wb,
> > >   					    &vkms_wb_connector_funcs,
> > >   					    &vkms_wb_encoder_helper_funcs,
> > >   					    vkms_wb_formats,
> > > -					    ARRAY_SIZE(vkms_wb_formats));
> > > +					    ARRAY_SIZE(vkms_wb_formats), 1);
> > >   }
> > > diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h
> > > index 9697d27..5e002bc 100644
> > > --- a/include/drm/drm_writeback.h
> > > +++ b/include/drm/drm_writeback.h
> > > @@ -25,13 +25,29 @@ struct drm_writeback_connector {
> > >   	struct drm_connector base;
> > >   	/**
> > > -	 * @encoder: Internal encoder used by the connector to fulfill
> > > +	 * @encoder: handle to drm_encoder used by the connector to fulfill
> > >   	 * the DRM framework requirements. The users of the
> > >   	 * @drm_writeback_connector control the behaviour of the @encoder
> > >   	 * by passing the @enc_funcs parameter to drm_writeback_connector_init()
> > >   	 * function.
> > > +	 *
> > > +	 * For some vendor drivers, the hardware resources are shared between
> > > +	 * writeback encoder and rest of the display pipeline.
> > > +	 * To accommodate such cases, encoder is a handle to the real encoder
> > > +	 * hardware.
> > > +	 *
> > > +	 * For current existing writeback users, this shall continue to be the
> > > +	 * embedded encoder for the writeback connector.
> > > +	 *
> > > +	 */
> > > +	struct drm_encoder *encoder;
> > > +
> > > +	/**
> > > +	 * @internal_encoder: internal encoder used by writeback when
> > > +	 * a real encoder is not provided by the vendor drm drivers.
> > > +	 * @encoder will be assigned to this for those cases.
> > >   	 */
> > > -	struct drm_encoder encoder;
> > > +	struct drm_encoder internal_encoder;
> > 
> > None of this belong here.
> Alright, will split to the next patch.
> > 
> > >   	/**
> > >   	 * @pixel_formats_blob_ptr:
> > > @@ -150,7 +166,7 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > >   				 struct drm_writeback_connector *wb_connector,
> > >   				 const struct drm_connector_funcs *con_funcs,
> > >   				 const struct drm_encoder_helper_funcs *enc_helper_funcs,
> > > -				 const u32 *formats, int n_formats);
> > > +				 const u32 *formats, int n_formats, uint32_t possible_crtcs);
> > >   int drm_writeback_set_fb(struct drm_connector_state *conn_state,
> > >   			 struct drm_framebuffer *fb);
> > 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯


More information about the Freedreno mailing list