[Freedreno] [PATCH v2 6/8] arm64: dts: qcom: sdm630: use defined symbols for interconnects

[Dmitry Baryshkov]

Replace numeric values with the symbolic names defined in the bindings
header.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 17a1877587cf..01a1a1703568 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1045,7 +1046,7 @@ adreno_gpu: gpu at 5000000 {
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
-			interconnects = <&gnoc 1 &bimc 5>;
+			interconnects = <&gnoc MASTER_APSS_PROC &bimc SLAVE_EBI>;
 			interconnect-names = "gfx-mem";
 
 			operating-points-v2 = <&gpu_sdm630_opp_table>;
@@ -1299,8 +1300,8 @@ sdhc_2: sdhci at c084000 {
 					<&xo_board>;
 			clock-names = "core", "iface", "xo";
 
-			interconnects = <&a2noc 3 &a2noc 10>,
-					<&gnoc 0 &cnoc 28>;
+			interconnects = <&a2noc MASTER_SDCC_2 &a2noc SLAVE_A2NOC_SNOC>,
+					<&gnoc MASTER_APSS_PROC &cnoc SLAVE_SDCC_2>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			pinctrl-names = "default", "sleep";
@@ -1351,8 +1352,8 @@ sdhc_1: sdhci at c0c4000 {
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "core", "iface", "xo", "ice";
 
-			interconnects = <&a2noc 2 &a2noc 10>,
-					<&gnoc 0 &cnoc 27>;
+			interconnects = <&a2noc MASTER_SDCC_1 &a2noc SLAVE_A2NOC_SNOC>,
+					<&gnoc MASTER_APSS_PROC &cnoc SLAVE_SDCC_1>;
 			interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
 			operating-points-v2 = <&sdhc1_opp_table>;
 			pinctrl-names = "default", "sleep";
@@ -1525,9 +1526,9 @@ mdp: mdp at c901000 {
 					      "core",
 					      "vsync";
 
-				interconnects = <&mnoc 2 &bimc 5>,
-						<&mnoc 3 &bimc 5>,
-						<&gnoc 0 &mnoc 17>;
+				interconnects = <&mnoc MASTER_MDP_P0 &bimc SLAVE_EBI>,
+						<&mnoc MASTER_MDP_P1 &bimc SLAVE_EBI>,
+						<&gnoc MASTER_APSS_PROC &mnoc SLAVE_DISPLAY_CFG>;
 				interconnect-names = "mdp0-mem",
 						     "mdp1-mem",
 						     "rotator-mem";
@@ -2034,7 +2035,7 @@ camss: camss at ca00000 {
 				"cphy_csid1",
 				"cphy_csid2",
 				"cphy_csid3";
-			interconnects = <&mnoc 5 &bimc 5>;
+			interconnects = <&mnoc MASTER_VFE &bimc SLAVE_EBI>;
 			interconnect-names = "vfe-mem";
 			iommus = <&mmss_smmu 0xc00>,
 				 <&mmss_smmu 0xc01>,
@@ -2097,8 +2098,8 @@ venus: video-codec at cc00000 {
 				 <&mmcc VIDEO_AXI_CLK>,
 				 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
 			clock-names = "core", "iface", "bus", "bus_throttle";
-			interconnects = <&gnoc 0 &mnoc 13>,
-					<&mnoc 4 &bimc 5>;
+			interconnects = <&gnoc MASTER_APSS_PROC &mnoc SLAVE_VENUS_CFG>,
+					<&mnoc MASTER_VENUS &bimc SLAVE_EBI>;
 			interconnect-names = "cpu-cfg", "video-mem";
 			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 			iommus = <&mmss_smmu 0x400>,
-- 
2.35.1