[Freedreno] [PATCH v1 1/2] phy/qcom: add regulator_set_load to edp/dp phy

[Kuogee Hsieh]

On 5/18/2022 2:29 AM, Vinod Koul wrote:
> On 17-05-22, 10:25, Kuogee Hsieh wrote:
>
> pls use the correct subsystem tag, "phy: xxx" in this case
>
>> This patch add regulator_set_load() to both eDP and DP phy driver
>> to have totally control regulators.
> Can you explain what is meant by "totally control regulators"

Original regulator_set_load() is done by DP controller.

This patch has moved regulator_set_load() from DP controller to DP phy.

Therefore DP phy has total control of both vdda-phy and vda-pll regulators.


>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-edp.c | 25 +++++++++++++++++++++----
>>   drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++++
>>   2 files changed, 45 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
>> index cacd32f..9b55095 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
>> @@ -87,17 +87,24 @@ struct qcom_edp {
>>   
>>   	struct clk_bulk_data clks[2];
>>   	struct regulator_bulk_data supplies[2];
>> +	int enable_load[2];
>> +	int disable_load[2];
>>   };
>>   
>>   static int qcom_edp_phy_init(struct phy *phy)
>>   {
>>   	struct qcom_edp *edp = phy_get_drvdata(phy);
>>   	int ret;
>> +	int num_consumers = ARRAY_SIZE(edp->supplies);
>> +	int i;
>>   
>> -	ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
>> +	ret = regulator_bulk_enable(num_consumers, edp->supplies);
>>   	if (ret)
>>   		return ret;
>>   
>> +	for (i = num_consumers - 1; i >= 0; --i)
>> +		regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
>> +
>>   	ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
>>   	if (ret)
>>   		goto out_disable_supplies;
>> @@ -425,9 +432,15 @@ static int qcom_edp_phy_power_off(struct phy *phy)
>>   static int qcom_edp_phy_exit(struct phy *phy)
>>   {
>>   	struct qcom_edp *edp = phy_get_drvdata(phy);
>> +	int num_consumers = ARRAY_SIZE(edp->supplies);
>> +	int i;
>>   
>>   	clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
>> -	regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
>> +
>> +	for (i = num_consumers - 1; i >= 0; --i)
>> +		regulator_set_load(edp->supplies[i].consumer, edp->disable_load[i]);
>> +
>> +	regulator_bulk_disable(num_consumers, edp->supplies);
>>   
>>   	return 0;
>>   }
>> @@ -633,8 +646,12 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>>   	if (ret)
>>   		return ret;
>>   
>> -	edp->supplies[0].supply = "vdda-phy";
>> -	edp->supplies[1].supply = "vdda-pll";
>> +	edp->supplies[0].supply = "vdda-1p2";
>> +	edp->supplies[1].supply = "vdda-0p9";
> These are documented in bindings, so cannot be removed, Reminder binding
> is an ABI
>   
> You have not documented the new names either...
>
>> +	edp->enable_load[0] = 21800;	/* 1.2 V */
>> +	edp->enable_load[1] = 36000;	/* 1.2 V */
>> +	edp->disable_load[0] = 4;	/* 0.9 V */
>> +	edp->disable_load[1] = 4;	/* 10.9V */
> is that correct, 10.9V?
>
>>   	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
>>   	if (ret)
>>   		return ret;
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
>> index b144ae1..c589231 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> This is a different driver, so should be a different patch!
>
>> @@ -3130,6 +3130,8 @@ struct qmp_phy_cfg {
>>   	int num_resets;
>>   	/* regulators to be requested */
>>   	const char * const *vreg_list;
>> +	const unsigned int *vreg_enable_load;
>> +	const unsigned int *vreg_disable_load;
>>   	int num_vregs;
>>   
>>   	/* array of registers with different offsets */
>> @@ -3346,6 +3348,14 @@ static const char * const qmp_phy_vreg_l[] = {
>>   	"vdda-phy", "vdda-pll",
>>   };
>>   
>> +static const unsigned int qmp_phy_vreg_enable_load[] = {
>> +	21800, 36000
>> +};
>> +
>> +static const unsigned int qmp_phy_vreg_disable_load[] = {
>> +	4, 32
>> +};
>> +
>>   static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
>>   	.type			= PHY_TYPE_USB3,
>>   	.nlanes			= 1,
>> @@ -4072,6 +4082,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
>>   	.reset_list		= msm8996_usb3phy_reset_l,
>>   	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
>>   	.vreg_list		= qmp_phy_vreg_l,
>> +	.vreg_enable_load	= qmp_phy_vreg_enable_load,
>> +	.vreg_disable_load	= qmp_phy_vreg_disable_load,
>>   	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
>>   	.regs			= qmp_v4_usb3phy_regs_layout,
>>   
>> @@ -4139,6 +4151,8 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
>>   	.reset_list		= msm8996_usb3phy_reset_l,
>>   	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
>>   	.vreg_list		= qmp_phy_vreg_l,
>> +	.vreg_enable_load	= qmp_phy_vreg_enable_load,
>> +	.vreg_disable_load	= qmp_phy_vreg_disable_load,
>>   	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
>>   	.regs			= qmp_v4_usb3phy_regs_layout,
>>   
>> @@ -5015,6 +5029,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
>>   		goto err_reg_enable;
>>   	}
>>   
>> +	if (cfg->vreg_enable_load) {
>> +		for (i = cfg->num_vregs - 1; i >= 0; --i)
>> +			regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
>> +	}
>> +
>>   	for (i = 0; i < cfg->num_resets; i++) {
>>   		ret = reset_control_assert(qmp->resets[i]);
>>   		if (ret) {
>> @@ -5116,6 +5135,11 @@ static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
>>   
>>   	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
>>   
>> +	if (cfg->vreg_disable_load[i]) {
>> +		for (i = cfg->num_vregs - 1; i >= 0; --i)
>> +			regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_disable_load[i]);
>> +	}
>> +
>>   	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
>>   
>>   	mutex_unlock(&qmp->phy_mutex);
>> -- 
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project