[Freedreno] [PATCH v4 1/3] phy/qualcomm: add regulator_set_load to edp phy

[Dmitry Baryshkov]

On Thu, 19 May 2022 at 00:36, Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>
> This patch add regulator_set_load() before enable regulator at
> eDP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index cacd32f..fbe0be0 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -87,14 +87,20 @@ struct qcom_edp {
>
>         struct clk_bulk_data clks[2];
>         struct regulator_bulk_data supplies[2];
> +       int enable_load[2];
>  };
>
>  static int qcom_edp_phy_init(struct phy *phy)
>  {
>         struct qcom_edp *edp = phy_get_drvdata(phy);
>         int ret;
> +       int num_consumers = ARRAY_SIZE(edp->supplies);

No need to. ARRAY_SIZE is compile-time calculated.

> +       int i;
>
> -       ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> +       for (i = num_consumers - 1; i >= 0; --i)
> +               regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);

Please. Change this to the ascending order or provide a good
description why it's done the other way. Your pointer to
regulator_bulk_enable() is not valid, as it processes arrays in the
ascending order.

> +
> +       ret = regulator_bulk_enable(num_consumers, edp->supplies);
>         if (ret)
>                 return ret;
>
> @@ -635,6 +641,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>
>         edp->supplies[0].supply = "vdda-phy";
>         edp->supplies[1].supply = "vdda-pll";
> +       edp->enable_load[0] = 21800;    /* load for 1.2 V vdda-phy supply */
> +       edp->enable_load[1] = 36000;    /* load for 1.2 V vdda-pll supply */

Isn't vdda-pll 0.9V? On sm8250 I see VDD_A_USB0_SS_DP_1P2 and
VDD_A_USB0_SS_DP_CORE (which is 0.9V).

>         ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
>         if (ret)
>                 return ret;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>


-- 
With best wishes
Dmitry