[Freedreno] [PATCH v12 2/3] phy: qcom-qmp: add regulator_set_load to dp phy
Doug Anderson
dianders at chromium.org
Wed May 25 20:42:01 UTC 2022
Hi,
On Wed, May 25, 2022 at 12:37 PM Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>
> This patch add regulator_set_load() before enable regulator at
> DP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd at chromium.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 41 +++++++++++++++++++++++++++++--------
> 1 file changed, 32 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index b144ae1..5fda39f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -3075,6 +3075,17 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> };
>
> +/* list of regulators */
> +struct qmp_regulator_data {
> + const char *name;
> + unsigned int enable_load;
> +};
> +
> +struct qmp_regulator_data qmp_phy_vreg_l[] = {
> + { .name = "vdda-phy", .enable_load = 21800 },
> + { .name = "vdda-pll", .enable_load = 36000 },
> +};
> +
> struct qmp_phy;
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> @@ -3129,7 +3140,7 @@ struct qmp_phy_cfg {
> const char * const *reset_list;
> int num_resets;
> /* regulators to be requested */
> - const char * const *vreg_list;
> + const struct qmp_regulator_data *vreg_list;
> int num_vregs;
>
> /* array of registers with different offsets */
> @@ -3341,11 +3352,6 @@ static const char * const sdm845_pciephy_reset_l[] = {
> "phy",
> };
>
> -/* list of regulators */
> -static const char * const qmp_phy_vreg_l[] = {
> - "vdda-phy", "vdda-pll",
> -};
> -
> static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -5488,16 +5494,33 @@ static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *
> {
> struct qcom_qmp *qmp = dev_get_drvdata(dev);
> int num = cfg->num_vregs;
> - int i;
> + int ret, i;
>
> qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> if (!qmp->vregs)
> return -ENOMEM;
>
> for (i = 0; i < num; i++)
> - qmp->vregs[i].supply = cfg->vreg_list[i];
> + qmp->vregs[i].supply = cfg->vreg_list[i].name;
>
> - return devm_regulator_bulk_get(dev, num, qmp->vregs);
> + ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> + if (ret) {
> + dev_err(dev, "failed at devm_regulator_bulk_get\n");
> + goto err;
There's no reason for a goto and in general kernel style that I've
seen would suggest just "return ret;" here
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = regulator_set_load(qmp->vregs[i].consumer,
> + cfg->vreg_list[i].enable_load);
super nitty, but there should be one more space before "cfg" to line
up under the parenthesis.
> + if (ret) {
> + dev_err(dev, "failed to set load at %s\n",
> + qmp->vregs[i].supply);
> + break;
optional: I guess I don't care tons, but I'd be tempted to just
"return ret;" here. Then at the end of the function just "return 0;"
All of these are pretty nitty though, so I'm happy enough with:
Reviewed-by: Douglas Anderson <dianders at chromium.org>
On Wed, May 25, 2022 at 12:37 PM Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>
> This patch add regulator_set_load() before enable regulator at
> DP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd at chromium.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 41 +++++++++++++++++++++++++++++--------
> 1 file changed, 32 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index b144ae1..5fda39f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -3075,6 +3075,17 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN, 0x2e),
> };
>
> +/* list of regulators */
> +struct qmp_regulator_data {
> + const char *name;
> + unsigned int enable_load;
> +};
> +
> +struct qmp_regulator_data qmp_phy_vreg_l[] = {
> + { .name = "vdda-phy", .enable_load = 21800 },
> + { .name = "vdda-pll", .enable_load = 36000 },
> +};
> +
> struct qmp_phy;
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> @@ -3129,7 +3140,7 @@ struct qmp_phy_cfg {
> const char * const *reset_list;
> int num_resets;
> /* regulators to be requested */
> - const char * const *vreg_list;
> + const struct qmp_regulator_data *vreg_list;
> int num_vregs;
>
> /* array of registers with different offsets */
> @@ -3341,11 +3352,6 @@ static const char * const sdm845_pciephy_reset_l[] = {
> "phy",
> };
>
> -/* list of regulators */
> -static const char * const qmp_phy_vreg_l[] = {
> - "vdda-phy", "vdda-pll",
> -};
> -
> static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -5488,16 +5494,33 @@ static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *
> {
> struct qcom_qmp *qmp = dev_get_drvdata(dev);
> int num = cfg->num_vregs;
> - int i;
> + int ret, i;
>
> qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> if (!qmp->vregs)
> return -ENOMEM;
>
> for (i = 0; i < num; i++)
> - qmp->vregs[i].supply = cfg->vreg_list[i];
> + qmp->vregs[i].supply = cfg->vreg_list[i].name;
>
> - return devm_regulator_bulk_get(dev, num, qmp->vregs);
> + ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> + if (ret) {
> + dev_err(dev, "failed at devm_regulator_bulk_get\n");
> + goto err;
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = regulator_set_load(qmp->vregs[i].consumer,
> + cfg->vreg_list[i].enable_load);
> + if (ret) {
> + dev_err(dev, "failed to set load at %s\n",
> + qmp->vregs[i].supply);
> + break;
> + }
> + }
> +
> +err:
> + return ret;
> }
>
> static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
More information about the Freedreno
mailing list