[Freedreno] [PATCH] drm/prime: Ensure mmap offset is initialized

Tue May 31 15:06:18 UTC 2022

On Tue, May 31, 2022 at 5:32 AM Daniel Vetter <daniel at ffwll.ch> wrote:
>
> On Mon, 30 May 2022 at 17:41, Rob Clark <robdclark at gmail.com> wrote:
> >
> > On Mon, May 30, 2022 at 7:49 AM Daniel Vetter <daniel at ffwll.ch> wrote:
> > >
> > > On Mon, 30 May 2022 at 15:54, Rob Clark <robdclark at gmail.com> wrote:
> > > >
> > > > On Mon, May 30, 2022 at 12:26 AM Thomas Zimmermann <tzimmermann at suse.de> wrote:
> > > > >
> > > > > Hi
> > > > >
> > > > > Am 29.05.22 um 18:29 schrieb Rob Clark:
> > > > > > From: Rob Clark <robdclark at chromium.org>
> > > > > >
> > > > > > If a GEM object is allocated, and then exported as a dma-buf fd which is
> > > > > > mmap'd before or without the GEM buffer being directly mmap'd, the
> > > > > > vma_node could be unitialized.  This leads to a situation where the CPU
> > > > > > mapping is not correctly torn down in drm_vma_node_unmap().
> > > > >
> > > > > Which drivers are affected by this problem?
> > > > >
> > > > > I checked several drivers and most appear to be initializing the offset
> > > > > during object construction, such as GEM SHMEM. [1] TTM-based drivers
> > > > > also seem unaffected. [2]
> > > > >
> > > > >  From a quick grep, only etnaviv, msm and omapdrm appear to be affected?
> > > > > They only seem to run drm_gem_create_mmap_offset() from their
> > > > > ioctl-handling code.
> > > > >
> > > > > If so, I'd say it's preferable to fix these drivers and put a
> > > > > drm_WARN_ONCE() into drm_gem_prime_mmap().
> > > >
> > > > That is good if fewer drivers are affected, however I disagree with
> > > > your proposal.  At least for freedreno userspace, a lot of bo's never
> > > > get mmap'd (either directly of via dmabuf), so we should not be
> > > > allocating a mmap offset unnecessarily.
> > >
> > > Does this actually matter in the grand scheme of things? We originally
> > > allocated mmap offset only on demand because userspace only had 32bit
> > > loff_t support and so simply couldn't mmap anything if the offset
> > > ended up above 32bit (even if there was still va space available).
> > >
> > > But those days are long gone (about 10 years or so) and the allocation
> > > overhead for an mmap offset is tiny. So I think unless you can
> > > benchmark an impact allocating it at bo alloc seems like the simplest
> > > design overall, and hence what we should be doing. And if the vma
> > > offset allocation every gets too slow due to fragmentation we can lift
> > > the hole tree from i915 into drm_mm and the job should be done. At
> > > that point we could also allocate the offset unconditionally in the
> > > gem_init function and be done with it.
> > >
> > > Iow I concur with Thomas here, unless there's hard data contrary
> > > simplicity imo trumps here.
> >
> > 32b userspace is still alive and well, at least on arm chromebooks ;-)
>
> There's lots of different 32b userspace. The old thing was about
> userspace which didn't use mmap64, but only mmap. Which could only
> mmap the lower 4GB of a file, and so if you ended up with mmap_offset
> above 4G then you'd blow up.
>
> But mmap64 is a thing since forever, and if you compile with the right
> glibc switch (loff_t is the magic thing iirc) it all works even with
> default mmap. So I really don't think you should have this problem
> anymore (except when cros is doing something really, really silly).

The other thing, not sure quite how much it matters, is the
vma_offset_manager size is smaller with 32b kernels, which is still a
thing on some devices.

But at any rate, not allocating a mmap offset when it isn't needed
still seems like an eminently reasonable thing to do.  And IMO my fix
is quite reasonable too.  But if you disagree I can workaround the
core helpers in the driver.

BR,
-R

> -Daniel
>
> >
> > BR,
> > -R
> >
> > > -Daniel
> > >
> > > >
> > > > BR,
> > > > -R
> > > >
> > > > > Best regards
> > > > > Thomas
> > > > >
> > > > > [1]
> > > > > https://elixir.bootlin.com/linux/v5.18/source/drivers/gpu/drm/drm_gem_shmem_helper.c#L85
> > > > > [2]
> > > > > https://elixir.bootlin.com/linux/v5.18/source/drivers/gpu/drm/ttm/ttm_bo.c#L1002
> > > > >
> > > > > >
> > > > > > Fixes: e5516553999f ("drm: call drm_gem_object_funcs.mmap with fake offset")
> > > > > > Signed-off-by: Rob Clark <robdclark at chromium.org>
> > > > > > ---
> > > > > > Note, it's possible the issue existed in some related form prior to the
> > > > > > commit tagged with Fixes.
> > > > > >
> > > > > >   drivers/gpu/drm/drm_prime.c | 5 +++++
> > > > > >   1 file changed, 5 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
> > > > > > index e3f09f18110c..849eea154dfc 100644
> > > > > > --- a/drivers/gpu/drm/drm_prime.c
> > > > > > +++ b/drivers/gpu/drm/drm_prime.c
> > > > > > @@ -716,6 +716,11 @@ int drm_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma)
> > > > > >       struct file *fil;
> > > > > >       int ret;
> > > > > >
> > > > > > +     /* Ensure that the vma_node is initialized: */
> > > > > > +     ret = drm_gem_create_mmap_offset(obj);
> > > > > > +     if (ret)
> > > > > > +             return ret;
> > > > > > +
> > > > > >       /* Add the fake offset */
> > > > > >       vma->vm_pgoff += drm_vma_node_start(&obj->vma_node);
> > > > > >
> > > > >
> > > > > --
> > > > > Thomas Zimmermann
> > > > > Graphics Driver Developer
> > > > > SUSE Software Solutions Germany GmbH
> > > > > Maxfeldstr. 5, 90409 Nürnberg, Germany
> > > > > (HRB 36809, AG Nürnberg)
> > > > > Geschäftsführer: Ivo Totev
> > >
> > >
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch