[Freedreno] [PATCH v2 3/8] dt-bindings: display/msm: add support for the display on SM8450
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Nov 4 13:00:50 UTC 2022
On 04/11/2022 15:52, Krzysztof Kozlowski wrote:
> On 04/11/2022 08:34, Dmitry Baryshkov wrote:
>> On 03/11/2022 17:03, Krzysztof Kozlowski wrote:
>>> On 02/11/2022 19:13, Dmitry Baryshkov wrote:
>>>> Add DPU and MDSS schemas to describe MDSS and DPU blocks on the Qualcomm
>>>> SM8450 platform.
>>>>
>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>> ---
>>>> .../bindings/display/msm/qcom,sm8450-dpu.yaml | 132 +++++++
>>>> .../display/msm/qcom,sm8450-mdss.yaml | 349 ++++++++++++++++++
>>>> 2 files changed, 481 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
>>>> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
>>>> new file mode 100644
>>>> index 000000000000..b8c508c50bc5
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
>>>> @@ -0,0 +1,132 @@
>>>> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm SM8450 Display DPU
>>>> +
>>>> +maintainers:
>>>> + - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>> +
>>>> +$ref: /schemas/display/msm/dpu-common.yaml#
>>>
>>> There is no such file and I could not fine any dependency mentioned in
>>> cover letter. I guess you miss link to your refactor series?
>>
>> Excuse me, yes. However the refactoring should be already a part of
>> linux-next, so I didn't think that I should especially point to it.
>
> Not in yesterday's next.
>
>>
>>> This also means bot won't be able to test it...
>>
>> How does bot detects the base commit? Should i use --base? Or does it
>> work on top of linux-next?
>
> I think bot tests on rc1, so even next would not help here. Anyway
> that's just a remark that you won't get automated test email.
>
>>
>>>
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: qcom,sm8450-dpu
>>>> +
>>>> + reg:
>>>> + items:
>>>> + - description: Address offset and size for mdp register set
>>>> + - description: Address offset and size for vbif register set
>>>> +
>>>> + reg-names:
>>>> + items:
>>>> + - const: mdp
>>>> + - const: vbif
>>>> +
>>>> + clocks:
>>>> + items:
>>>> + - description: Display hf axi clock
>>>> + - description: Display sf axi clock
>>>> + - description: Display ahb clock
>>>> + - description: Display lut clock
>>>> + - description: Display core clock
>>>> + - description: Display vsync clock
>>>
>>> Drop "clock", less typing.
>>
>> Ack
>>
>>>
>>>> +
>>>> + clock-names:
>>>> + items:
>>>> + - const: bus
>>>> + - const: nrt_bus
>>>> + - const: iface
>>>> + - const: lut
>>>> + - const: core
>>>> + - const: vsync
>>>> +
>>>> +unevaluatedProperties: false
>>>> +
>>>> +examples:
>>>> + - |
>>>> + #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
>>>> + #include <dt-bindings/clock/qcom,gcc-sm8450.h>
>>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> + #include <dt-bindings/interconnect/qcom,sm8450.h>
>>>> + #include <dt-bindings/power/qcom-rpmpd.h>
>>>> +
>>>> + display-controller at ae01000 {
>>>> + compatible = "qcom,sm8450-dpu";
>>>> + reg = <0x0ae01000 0x8f000>,
>>>> + <0x0aeb0000 0x2008>;
>>>> + reg-names = "mdp", "vbif";
>>>> +
>>>> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
>>>> + <&gcc GCC_DISP_SF_AXI_CLK>,
>>>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>>> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
>>>> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
>>>> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>>> + clock-names = "bus",
>>>> + "nrt_bus",
>>>> + "iface",
>>>> + "lut",
>>>> + "core",
>>>> + "vsync";
>>>> +
>>>> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>>> + assigned-clock-rates = <19200000>;
>>>> +
>>>> + operating-points-v2 = <&mdp_opp_table>;
>>>> + power-domains = <&rpmhpd SM8450_MMCX>;
>>>> +
>>>> + interrupt-parent = <&mdss>;
>>>> + interrupts = <0>;
>>>> +
>>>> + ports {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + port at 0 {
>>>> + reg = <0>;
>>>> + dpu_intf1_out: endpoint {
>>>> + remote-endpoint = <&dsi0_in>;
>>>> + };
>>>> + };
>>>> +
>>>> + port at 1 {
>>>> + reg = <1>;
>>>> + dpu_intf2_out: endpoint {
>>>> + remote-endpoint = <&dsi1_in>;
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + mdp_opp_table: opp-table {
>>>> + compatible = "operating-points-v2";
>>>> +
>>>> + opp-172000000{
>>>> + opp-hz = /bits/ 64 <172000000>;
>>>> + required-opps = <&rpmhpd_opp_low_svs_d1>;
>>>> + };
>>>> +
>>>> + opp-200000000 {
>>>> + opp-hz = /bits/ 64 <200000000>;
>>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>>> + };
>>>> +
>>>> + opp-325000000 {
>>>> + opp-hz = /bits/ 64 <325000000>;
>>>> + required-opps = <&rpmhpd_opp_svs>;
>>>> + };
>>>> +
>>>> + opp-375000000 {
>>>> + opp-hz = /bits/ 64 <375000000>;
>>>> + required-opps = <&rpmhpd_opp_svs_l1>;
>>>> + };
>>>> +
>>>> + opp-500000000 {
>>>> + opp-hz = /bits/ 64 <500000000>;
>>>> + required-opps = <&rpmhpd_opp_nom>;
>>>> + };
>>>> + };
>>>> + };
>>>> +...
>>>> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
>>>> new file mode 100644
>>>> index 000000000000..05c606e6ada3
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
>>>> @@ -0,0 +1,349 @@
>>>> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm SM8450 Display MDSS
>>>> +
>>>> +maintainers:
>>>> + - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>>> +
>>>> +description:
>>>> + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
>>>
>>> Drop "Device tree bindings for" and rewrite the sentence (e.g. drop "that").
>>>
>>>> + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
>>>> + bindings of MDSS are mentioned for SM8450 target.
>>>
>>> Drop last sentence.
>>>
>>>> +
>>>> +$ref: /schemas/display/msm/mdss-common.yaml#
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + items:
>>>
>>> Drop items.
>>>
>>>> + - const: qcom,sm8450-mdss
>>>
>>>> +
>>>> + clocks:
>>>> + items:
>>>> + - description: Display AHB clock from gcc
>>>> + - description: Display hf axi clock
>>>> + - description: Display sf axi clock
>>>> + - description: Display core clock
>>>
>>> Drop trailing "clocks" (the first "AHB clock" is ok)
>>
>> Hmm, not sure that I understand the difference, but fine with me.
>
> Not much different, but for me AHB is a bus, so "Display AHB from gcc"
> suggests a bit gcc provides some bus, but you want bus clock. AXI is
> also a bus... so maybe drop clock everywhere.
Ack. Sounds logical. And the 'from gcc' too.
--
With best wishes
Dmitry
More information about the Freedreno
mailing list