[Freedreno] [RFC PATCH v2 08/11] iommu/arm-smmu-qcom: provide separate implementation for SDM845-smmu-500

[Dmitry Baryshkov]

On Sat, 5 Nov 2022 at 01:16, Richard Acayan <mailingradian at gmail.com> wrote:
>
> On Wed, Nov 02, 2022 at 09:44:17PM +0300, Dmitry Baryshkov wrote:
> > There is only one platform, which needs special care in the reset
> > function, the SDM845. Add special handler for sdm845 and drop the
> > qcom_smmu500_reset() function.
> >
> > Reviewed-by: Sai Prakash Ranjan <quic_saipraka at quicinc.com>
> > Tested-by: Sai Prakash Ranjan <quic_saipraka at quicinc.com>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> >  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 34 ++++++++++++----------
> >  1 file changed, 19 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > index c3bcd6eb2f42..75bc770ccf8c 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > @@ -361,6 +361,8 @@ static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu)
> >  {
> >       int ret;
> >
> > +     arm_mmu500_reset(smmu);
> > +
> >       /*
> >        * To address performance degradation in non-real time clients,
> >        * such as USB and UFS, turn off wait-for-safe on sdm845 based boards,
> > @@ -374,23 +376,20 @@ static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu)
> >       return ret;
> >  }
> >
> > -static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
> > -{
> > -     const struct device_node *np = smmu->dev->of_node;
> > -
> > -     arm_mmu500_reset(smmu);
> > -
> > -     if (of_device_is_compatible(np, "qcom,sdm845-smmu-500"))
> > -             return qcom_sdm845_smmu500_reset(smmu);
> > -
> > -     return 0;
> > -}
> > -
> >  static const struct arm_smmu_impl qcom_smmu_impl = {
> >       .init_context = qcom_smmu_init_context,
> >       .cfg_probe = qcom_smmu_cfg_probe,
> >       .def_domain_type = qcom_smmu_def_domain_type,
> > -     .reset = qcom_smmu500_reset,
> > +     .reset = arm_mmu500_reset,
> > +     .write_s2cr = qcom_smmu_write_s2cr,
> > +     .tlb_sync = qcom_smmu_tlb_sync,
> > +};
> > +
> > +static const struct arm_smmu_impl sdm845_smmu_500_impl = {
> > +     .init_context = qcom_smmu_init_context,
> > +     .cfg_probe = qcom_smmu_cfg_probe,
> > +     .def_domain_type = qcom_smmu_def_domain_type,
> > +     .reset = qcom_sdm845_smmu500_reset,
> >       .write_s2cr = qcom_smmu_write_s2cr,
> >       .tlb_sync = qcom_smmu_tlb_sync,
> >  };
> > @@ -398,7 +397,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = {
> >  static const struct arm_smmu_impl qcom_adreno_smmu_impl = {
> >       .init_context = qcom_adreno_smmu_init_context,
> >       .def_domain_type = qcom_smmu_def_domain_type,
> > -     .reset = qcom_smmu500_reset,
> > +     .reset = arm_mmu500_reset,
> >       .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
> >       .write_sctlr = qcom_adreno_smmu_write_sctlr,
> >       .tlb_sync = qcom_smmu_tlb_sync,
> > @@ -450,6 +449,11 @@ static const struct qcom_smmu_match_data qcom_smmu_data = {
> >       .adreno_impl = &qcom_adreno_smmu_impl,
> >  };
> >
> > +static const struct qcom_smmu_match_data sdm845_smmu_500_data = {
> > +     .impl = &sdm845_smmu_500_impl,
> > +     /* No adreno impl, on sdm845 it is handled by separete sdm845-smmu-v2. */
> separete -> separate

Ack.

> Also, while I'm here, does "No adreno impl" constitute adding a
> compatible in the driver?

Not sure that I got your question, please excuse me. Could you please
describe what you meant?
We already have qcom,sdm845-smmu-v2 in the match table, if that's your
question. And there is no need for Adreno impl here, on sdm845 the
SMMU connected to Adreno is v2 rather than mmu-500.
Probably I should change this to "No need for adreno impl....". Would
that be better?

> > +};
> > +
> >  static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
> >       { .compatible = "qcom,msm8996-smmu-v2", .data = &msm8996_smmu_data },
> >       { .compatible = "qcom,msm8998-smmu-v2", .data = &qcom_smmu_data },
> > @@ -460,7 +464,7 @@ static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
> >       { .compatible = "qcom,sc8280xp-smmu-500", .data = &qcom_smmu_data },
> >       { .compatible = "qcom,sdm630-smmu-v2", .data = &qcom_smmu_data },
> >       { .compatible = "qcom,sdm845-smmu-v2", .data = &qcom_smmu_data },
> > -     { .compatible = "qcom,sdm845-smmu-500", .data = &qcom_smmu_data },
> > +     { .compatible = "qcom,sdm845-smmu-500", .data = &sdm845_smmu_500_data },
> >       { .compatible = "qcom,sm6125-smmu-500", .data = &qcom_smmu_data },
> >       { .compatible = "qcom,sm6350-smmu-500", .data = &qcom_smmu_data },
> >       { .compatible = "qcom,sm6375-smmu-500", .data = &qcom_smmu_data },
> > --
> > 2.35.1
> >



-- 
With best wishes
Dmitry