[Freedreno] [PATCH v9 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml

[Krzysztof Kozlowski]

On 24/10/2022 18:42, Dmitry Baryshkov wrote:
> Move properties common to all DPU DT nodes to the dpu-common.yaml.
> 
> Note, this removes description of individual DPU port@ nodes. However
> such definitions add no additional value. The reg values do not
> correspond to hardware INTF indices. The driver discovers and binds
> these ports not paying any care for the order of these items. Thus just
> leave the reference to graph.yaml#/properties/ports and the description.
> 
> Reviewed-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../bindings/display/msm/dpu-common.yaml      | 52 +++++++++++++++++++
>  .../bindings/display/msm/dpu-msm8998.yaml     | 44 +---------------
>  .../bindings/display/msm/dpu-qcm2290.yaml     | 39 +-------------
>  .../bindings/display/msm/dpu-sc7180.yaml      | 43 +--------------
>  .../bindings/display/msm/dpu-sc7280.yaml      | 43 +--------------
>  .../bindings/display/msm/dpu-sdm845.yaml      | 44 +---------------
>  6 files changed, 62 insertions(+), 203 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
> new file mode 100644
> index 000000000000..8ffbc30c6b7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
> @@ -0,0 +1,52 @@
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DPU common properties
> +
> +maintainers:
> +  - Krishna Manikandan <quic_mkrishn at quicinc.com>
> +  - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> +  - Rob Clark <robdclark at gmail.com>
> +
> +description: |
> +  Common properties for QCom DPU display controller.
> +
> +properties:
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  operating-points-v2: true
> +  opp-table:
> +    type: object
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    description: |
> +      Contains the list of output ports from DPU device. These ports
> +      connect to interfaces that are external to the DPU hardware,
> +      such as DSI, DP etc.
> +
> +    patternProperties:
> +      "^port@[0-9a-f]+$":
> +        $ref: /schemas/graph.yaml#/properties/port
> +
> +    # at least one port is required
> +    required:
> +      - port at 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names

You do not have these properties here. Require only these properties
which are defined here.

Best regards,
Krzysztof