[Freedreno] [PATCH 2/5] drm/msm/dsi: Remove repeated calculation of slice_per_intf

[Bjorn Andersson]

On Sat, Oct 01, 2022 at 09:08:04PM +0200, Marijn Suijten wrote:
> slice_per_intf is already computed for intf_width, which holds the same
> value as hdisplay.
> 
> Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>

Reviewed-by: Bjorn Andersson <andersson at kernel.org>

> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index e05bae647431..cb6f2fa11f58 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -842,7 +842,7 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
>  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mode, u32 hdisplay)
>  {
>  	struct drm_dsc_config *dsc = msm_host->dsc;
> -	u32 reg, intf_width, reg_ctrl, reg_ctrl2;
> +	u32 reg, reg_ctrl, reg_ctrl2;
>  	u32 slice_per_intf, total_bytes_per_intf;
>  	u32 pkt_per_line;
>  	u32 bytes_in_slice;
> @@ -851,8 +851,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>  	/* first calculate dsc parameters and then program
>  	 * compress mode registers
>  	 */
> -	intf_width = hdisplay;
> -	slice_per_intf = DIV_ROUND_UP(intf_width, dsc->slice_width);
> +	slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
>  
>  	/* If slice_per_pkt is greater than slice_per_intf
>  	 * then default to 1. This can happen during partial
> @@ -861,7 +860,6 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>  	if (slice_per_intf > dsc->slice_count)
>  		dsc->slice_count = 1;
>  
> -	slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
>  	bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * dsc->bits_per_pixel, 8);
>  
>  	dsc->slice_chunk_size = bytes_in_slice;
> -- 
> 2.37.3
>