[Freedreno] [PATCH v3 2/2] drm/msm/dsi: Add phy configuration for QCM2290

[Dmitry Baryshkov]

On Sat, 1 Oct 2022 at 19:00, Marijn Suijten
<marijn.suijten at somainline.org> wrote:
>
> On 2022-09-24 15:19:00, Dmitry Baryshkov wrote:
> > From: Loic Poulain <loic.poulain at linaro.org>
> >
> > The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not
> > fully compatible with the standard 14nm PHY, so it requires a separate
> > compatible and config entry.
> >
> > Signed-off-by: Loic Poulain <loic.poulain at linaro.org>
> > [DB: rebased and updated commit msg]
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c      |  2 ++
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h      |  1 +
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 17 +++++++++++++++++
> >  3 files changed, 20 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > index 7fc0975cb869..ee6051367679 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > @@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
> >  #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
> >       { .compatible = "qcom,dsi-phy-14nm",
> >         .data = &dsi_phy_14nm_cfgs },
> > +     { .compatible = "qcom,dsi-phy-14nm-2290",
> > +       .data = &dsi_phy_14nm_2290_cfgs },
> >       { .compatible = "qcom,dsi-phy-14nm-660",
> >         .data = &dsi_phy_14nm_660_cfgs },
> >       { .compatible = "qcom,dsi-phy-14nm-8953",
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > index 60a99c6525b2..1096afedd616 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > @@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
> > +extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs;
>
> following alphabetical sorting (same as the other locations in this
> series), this should be above 660?

Ack

>
> >  extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
> >  extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > index 0f8f4ca46429..9f488adea7f5 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> > @@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
> >       .io_start = { 0x1a94400, 0x1a96400 },
> >       .num_dsi_phy = 2,
> >  };
> > +
> > +const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
> > +     .has_phy_lane = true,
> > +     .regulator_data = dsi_phy_14nm_17mA_regulators,
> > +     .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
> > +     .ops = {
> > +             .enable = dsi_14nm_phy_enable,
> > +             .disable = dsi_14nm_phy_disable,
> > +             .pll_init = dsi_pll_14nm_init,
> > +             .save_pll_state = dsi_14nm_pll_save_state,
> > +             .restore_pll_state = dsi_14nm_pll_restore_state,
> > +     },
> > +     .min_pll_rate = VCO_MIN_RATE,
> > +     .max_pll_rate = VCO_MAX_RATE,
> > +     .io_start = { 0x5e94400 },
>
> For sm6125 we also need this exact io_start (and a single PHY), do you
> think it makes sense to add a compatible that reuses the same struct (I
> can do that in a folloup patch) and/or generalize this struct (name)?
>
> However, our regulator setup appears to be different.  I recall not
> finding any `vcca` supply in my downstream sources, and had this in my
> notes for a similar dsi_phy_14nm.c patch:
>
>     sm6125 uses an RPM regulator
>
> https://github.com/sonyxperiadev/kernel/blob/f956fbd9a234033bd18234d456a2c32c126b38f3/arch/arm64/boot/dts/qcom/trinket-sde.dtsi#L388

I'd prefer a separate config for sm6125. This way you would be able to
add voting on the MX domain if required.


-- 
With best wishes
Dmitry