[Freedreno] [v6] drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Tue Oct 4 14:33:23 UTC 2022


On Sun, 2 Oct 2022 at 06:15, Kalyan Thota <quic_kalyant at quicinc.com> wrote:
>
> Flush mechanism for DSPP blocks has changed in sc7280 family, it
> allows individual sub blocks to be flushed in coordination with
> master flush control.
>
> Representation: master_flush && (PCC_flush | IGC_flush .. etc )
>
> This change adds necessary support for the above design.
>
> Changes in v1:
> - Few nits (Doug, Dmitry)
> - Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry)
>
> Changes in v2:
> - Move the address offset to flush macro (Dmitry)
> - Seperate ops for the sub block flush (Dmitry)
>
> Changes in v3:
> - Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry)
>
> Changes in v4:
> - Use shorter version for unsigned int (Stephen)
>
> Changes in v5:
> - Spurious patch please ignore.
>
> Changes in v6:
> - Add SOB tag (Doug, Dmitry)
>
> Signed-off-by: Kalyan Thota <quic_kalyant at quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c       |  2 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  5 +++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  4 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c     | 35 ++++++++++++++++++++++++--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h     | 10 ++++++--
>  5 files changed, 50 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 601d687..4170fbe 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -766,7 +766,7 @@ static void _dpu_crtc_setup_cp_blocks(struct drm_crtc *crtc)
>
>                 /* stage config flush mask */
>                 ctl->ops.update_pending_flush_dspp(ctl,
> -                       mixer[i].hw_dspp->idx);
> +                       mixer[i].hw_dspp->idx, DPU_DSPP_PCC);
>         }
>  }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 27f029f..0eecb2f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -65,7 +65,10 @@
>         (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>
>  #define CTL_SC7280_MASK \
> -       (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
> +       (BIT(DPU_CTL_ACTIVE_CFG) | \
> +        BIT(DPU_CTL_FETCH_ACTIVE) | \
> +        BIT(DPU_CTL_VM_CFG) | \
> +        BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
>
>  #define MERGE_3D_SM8150_MASK (0)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 38aa38a..8148e91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -161,10 +161,12 @@ enum {
>   * DSPP sub-blocks
>   * @DPU_DSPP_PCC             Panel color correction block
>   * @DPU_DSPP_GC              Gamma correction block
> + * @DPU_DSPP_IGC             Inverse Gamma correction block
>   */
>  enum {
>         DPU_DSPP_PCC = 0x1,
>         DPU_DSPP_GC,
> +       DPU_DSPP_IGC,
>         DPU_DSPP_MAX
>  };
>
> @@ -191,6 +193,7 @@ enum {
>   * @DPU_CTL_SPLIT_DISPLAY:     CTL supports video mode split display
>   * @DPU_CTL_FETCH_ACTIVE:      Active CTL for fetch HW (SSPPs)
>   * @DPU_CTL_VM_CFG:            CTL config to support multiple VMs
> + * @DPU_CTL_DSPP_BLOCK_FLUSH: CTL config to support dspp sub-block flush
>   * @DPU_CTL_MAX
>   */
>  enum {
> @@ -198,6 +201,7 @@ enum {
>         DPU_CTL_ACTIVE_CFG,
>         DPU_CTL_FETCH_ACTIVE,
>         DPU_CTL_VM_CFG,
> +       DPU_CTL_DSPP_SUB_BLOCK_FLUSH,
>         DPU_CTL_MAX
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index a35ecb6..f26f484 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -33,6 +33,7 @@
>  #define   CTL_INTF_FLUSH                0x110
>  #define   CTL_INTF_MASTER               0x134
>  #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
> +#define   CTL_DSPP_n_FLUSH(n)          ((0x13C) + ((n - 1) * 4))
>
>  #define CTL_MIXER_BORDER_OUT            BIT(24)
>  #define CTL_FLUSH_MASK_CTL              BIT(17)
> @@ -287,8 +288,9 @@ static void dpu_hw_ctl_update_pending_flush_merge_3d_v1(struct dpu_hw_ctl *ctx,
>  }
>
>  static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
> -       enum dpu_dspp dspp)
> +       enum dpu_dspp dspp, u32 dspp_sub_blk)
>  {
> +
>         switch (dspp) {
>         case DSPP_0:
>                 ctx->pending_flush_mask |= BIT(13);
> @@ -307,6 +309,31 @@ static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
>         }
>  }
>
> +static void dpu_hw_ctl_update_pending_flush_dspp_subblocks(
> +       struct dpu_hw_ctl *ctx, enum dpu_dspp dspp, u32 dspp_sub_blk)
> +{
> +       u32 flushbits = 0, active;
> +
> +       switch (dspp_sub_blk) {
> +       case DPU_DSPP_IGC:
> +               flushbits = BIT(2);
> +               break;
> +       case DPU_DSPP_PCC:
> +               flushbits = BIT(4);
> +               break;
> +       case DPU_DSPP_GC:
> +               flushbits = BIT(5);
> +               break;
> +       default:
> +               return;
> +       }
> +
> +       active = DPU_REG_READ(&ctx->hw, CTL_DSPP_n_FLUSH(dspp));
> +       DPU_REG_WRITE(&ctx->hw, CTL_DSPP_n_FLUSH(dspp), active | flushbits);
> +
> +       ctx->pending_flush_mask |= BIT(29);
> +}
> +
>  static u32 dpu_hw_ctl_poll_reset_status(struct dpu_hw_ctl *ctx, u32 timeout_us)
>  {
>         struct dpu_hw_blk_reg_map *c = &ctx->hw;
> @@ -675,7 +702,11 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
>         ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
>         ops->update_pending_flush_sspp = dpu_hw_ctl_update_pending_flush_sspp;
>         ops->update_pending_flush_mixer = dpu_hw_ctl_update_pending_flush_mixer;
> -       ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
> +       if (cap & BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
> +               ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp_subblocks;
> +       else
> +               ops->update_pending_flush_dspp = dpu_hw_ctl_update_pending_flush_dspp;
> +
>         if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
>                 ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
>  };
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 96c012e..1743572 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -149,12 +149,18 @@ struct dpu_hw_ctl_ops {
>
>         /**
>          * OR in the given flushbits to the cached pending_flush_mask
> -        * No effect on hardware
> +        *
> +        * If the hardware supports dspp sub block flush, then sub-block
> +        * flushes are written to the hardware and main dspp flush will
> +        * be cached in the pending_flush_mask.

Ok, this changes the semantic of the update_pending_FOO_mask.
Can we cache the pending DSPP blocks instead and flush them together
with the rest of pending flushes?

> +        *
>          * @ctx       : ctl path ctx pointer
>          * @blk       : DSPP block index
> +        * @dspp_sub_blk : DSPP sub-block index
>          */
>         void (*update_pending_flush_dspp)(struct dpu_hw_ctl *ctx,
> -               enum dpu_dspp blk);
> +               enum dpu_dspp blk,  u32 dspp_sub_blk);
> +
>         /**
>          * Write the value of the pending_flush_mask to hardware
>          * @ctx       : ctl path ctx pointer
> --
> 2.7.4
>


-- 
With best wishes
Dmitry


More information about the Freedreno mailing list