[Freedreno] [PATCH v6 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml

[Dmitry Baryshkov]

On 08/09/2022 00:13, Dmitry Baryshkov wrote:
> On Wed, 7 Sept 2022 at 22:59, Rob Herring <robh at kernel.org> wrote:
>>
>> On Thu, Sep 01, 2022 at 01:23:04PM +0300, Dmitry Baryshkov wrote:
>>> Move properties common to all DPU DT nodes to the dpu-common.yaml.
>>>
>>> Note, this removes description of individual DPU port@ nodes. However
>>> such definitions add no additional value. The reg values do not
>>> correspond to hardware INTF indices. The driver discovers and binds
>>> these ports not paying any care for the order of these items. Thus just
>>> leave the reference to graph.yaml#/properties/ports and the description.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>>   .../bindings/display/msm/dpu-common.yaml      | 44 ++++++++++++++++++
>>>   .../bindings/display/msm/dpu-msm8998.yaml     | 46 ++-----------------
>>>   .../bindings/display/msm/dpu-qcm2290.yaml     | 41 ++---------------
>>>   .../bindings/display/msm/dpu-sc7180.yaml      | 45 ++----------------
>>>   .../bindings/display/msm/dpu-sc7280.yaml      | 45 ++----------------
>>>   .../bindings/display/msm/dpu-sdm845.yaml      | 46 ++-----------------
>>>   6 files changed, 64 insertions(+), 203 deletions(-)
>>>   create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
>>> new file mode 100644
>>> index 000000000000..bf5764e9932b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
>>> @@ -0,0 +1,44 @@
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm Display DPU dt properties (common properties)
>>> +
>>> +maintainers:
>>> +  - Krishna Manikandan <quic_mkrishn at quicinc.com>
>>> +  - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> +  - Rob Clark <robdclark at gmail.com>
>>> +
>>> +description: |
>>> +  Common properties for QCom DPU display controller.
>>> +
>>> +properties:
>>> +  interrupts:
>>> +    maxItems: 1
>>> +
>>> +  power-domains:
>>> +    maxItems: 1
>>> +
>>> +  operating-points-v2: true
>>> +  opp-table:
>>> +    type: object
>>> +
>>> +  ports:
>>> +    $ref: /schemas/graph.yaml#/properties/ports
>>> +    description: |
>>> +      Contains the list of output ports from DPU device. These ports
>>> +      connect to interfaces that are external to the DPU hardware,
>>> +      such as DSI, DP etc.
>>
>> Haven't we been over this already?
>>
>> You have to define 'port' nodes or else anything is allowed in them
>> (and endpoint nodes). If you want to define them as pattern, then fine.
>> But you must have a ref to graph.yaml#/properties/port.
> 
> Last time you asked to do this, I did a check. Adding any additional
> property results in a schema error. And this is logical.
> graph.yaml#/properties/ports already limits the node properties. I
> thus do not see a need to define port@[0-9a-f]+$. Did I miss anything?

I see, what I did miss now. I missed adding properties to individual 
/port nodes. Please excuse me. BTW: is there any reason for not 
enforcing this in the graph.yaml?

-- 
With best wishes
Dmitry