[Freedreno] [PATCH v7 04/12] dt-bindings: display/msm: move common DPU properties to dpu-common.yaml
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Sep 15 13:37:34 UTC 2022
Move properties common to all DPU DT nodes to the dpu-common.yaml.
Note, this removes description of individual DPU port@ nodes. However
such definitions add no additional value. The reg values do not
correspond to hardware INTF indices. The driver discovers and binds
these ports not paying any care for the order of these items. Thus just
leave the reference to graph.yaml#/properties/ports and the description.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../bindings/display/msm/dpu-common.yaml | 48 +++++++++++++++++++
.../bindings/display/msm/dpu-msm8998.yaml | 44 +----------------
.../bindings/display/msm/dpu-qcm2290.yaml | 39 +--------------
.../bindings/display/msm/dpu-sc7180.yaml | 43 +----------------
.../bindings/display/msm/dpu-sc7280.yaml | 43 +----------------
.../bindings/display/msm/dpu-sdm845.yaml | 44 +----------------
6 files changed, 58 insertions(+), 203 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 000000000000..a39799115640
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,48 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn at quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
+ - Rob Clark <robdclark at gmail.com>
+
+description: |
+ Common properties for QCom DPU display controller.
+
+properties:
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc.
+
+ patternProperties:
+ "^port@[0-9a-f]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
index 253665c693e6..200eeace1c71 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -61,8 +61,9 @@ properties:
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
+ $ref: /schemas/display/msm/dpu-common.yaml#
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
properties:
compatible:
@@ -99,47 +100,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port at 0
- - port at 1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
index c5824e1d2382..d5f1d16b13d3 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -73,8 +73,9 @@ properties:
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
+ $ref: /schemas/display/msm/dpu-common.yaml#
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
properties:
compatible:
@@ -107,42 +108,6 @@ patternProperties:
- const: lut
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
index 4890bc25f3fd..2ac10664d79a 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -72,8 +72,9 @@ properties:
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
+ $ref: /schemas/display/msm/dpu-common.yaml#
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
properties:
compatible:
@@ -108,46 +109,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 2:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF0 (DP)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
index 584d646021d5..4ca7bc7f0185 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -71,8 +71,9 @@ properties:
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
+ $ref: /schemas/display/msm/dpu-common.yaml#
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
properties:
compatible:
@@ -106,46 +107,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF5 (EDP)
-
- required:
- - port at 0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
index a87deea8e9bc..de193ca11265 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -74,8 +74,9 @@ properties:
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
+ $ref: /schemas/display/msm/dpu-common.yaml#
description: Node containing the properties of DPU.
- additionalProperties: false
+ unevaluatedProperties: false
properties:
compatible:
@@ -108,47 +109,6 @@ patternProperties:
- const: core
- const: vsync
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port at 1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port at 0
- - port at 1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
required:
- compatible
- reg
--
2.35.1
More information about the Freedreno
mailing list