[Freedreno] [PATCH 2/2] drm/msm/dpu: add HDMI output support

[Arnaud Vrac]

On Apr 15 20:19, Dmitry Baryshkov <dmitry.baryshkov at linaro.org> wrote:

>MSM8998 and the older Qualcomm platforms support HDMI outputs. Now as
>DPU encoder is ready, add support for using INTF_HDMI.
>
>Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>---
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 45 +++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
>diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>index e85e3721d2c7..65cce59163a4 100644
>--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>@@ -617,6 +617,45 @@ static int _dpu_kms_initialize_displayport(struct drm_device *dev,
> 	return 0;
> }
>
>+static int _dpu_kms_initialize_hdmi(struct drm_device *dev,
>+				    struct msm_drm_private *priv,
>+				    struct dpu_kms *dpu_kms)
>+{
>+	struct drm_encoder *encoder = NULL;
>+	struct msm_display_info info;
>+	int rc;
>+	int i;
>+
>+	if (!priv->hdmi)
>+		return 0;
>+
>+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
>+	if (IS_ERR(encoder)) {
>+		DPU_ERROR("encoder init failed for HDMI display\n");
>+		return PTR_ERR(encoder);
>+	}
>+
>+	memset(&info, 0, sizeof(info));

Move this where fields are initialized ?

>+	rc = msm_hdmi_modeset_init(priv->hdmi, dev, encoder);
>+	if (rc) {
>+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
>+		drm_encoder_cleanup(encoder);
>+		return rc;
>+	}
>+
>+	info.num_of_h_tiles = 1;
>+	info.h_tile_instance[0] = i;

i is uninitialized here, the line can be removed.

With the above changes:

Reviewed-by: Arnaud Vrac <rawoul at gmail.com>
Tested-by: Arnaud Vrac <rawoul at gmail.com> # on msm8998

-Arnaud

>+	info.intf_type = INTF_HDMI;
>+	rc = dpu_encoder_setup(dev, encoder, &info);
>+	if (rc) {
>+		DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
>+			  encoder->base.id, rc);
>+		return rc;
>+	}
>+
>+	return 0;
>+}
>+
> static int _dpu_kms_initialize_writeback(struct drm_device *dev,
> 		struct msm_drm_private *priv, struct dpu_kms *dpu_kms,
> 		const u32 *wb_formats, int n_formats)
>@@ -683,6 +722,12 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
> 		return rc;
> 	}
>
>+	rc = _dpu_kms_initialize_hdmi(dev, priv, dpu_kms);
>+	if (rc) {
>+		DPU_ERROR("initialize HDMI failed, rc = %d\n", rc);
>+		return rc;
>+	}
>+
> 	/* Since WB isn't a driver check the catalog before initializing */
> 	if (dpu_kms->catalog->wb_count) {
> 		for (i = 0; i < dpu_kms->catalog->wb_count; i++) {
>-- 
>2.30.2
>