[Freedreno] [PATCH 5/5] drm/msm/dpu1: Handle the reg bus ICC path

[Konrad Dybcio]

On 19.04.2023 21:06, Jeykumar Sankaran wrote:
> 
> 
> On 4/17/2023 8:30 AM, Konrad Dybcio wrote:
>> Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there's
>> another path that needs to be handled to ensure MDSS functions properly,
>> namely the "reg bus", a.k.a the CPU-MDSS interconnect.
>>
>> Gating that path may have a variety of effects.. from none to otherwise
>> inexplicable DSI timeouts..
>>
>> On the DPU side, we need to keep the bus alive. The vendor driver
>> kickstarts it to max (300Mbps) throughput on first commit, but in
>> exchange for some battery life in rare DPU-enabled-panel-disabled
>> usecases, we can request it at DPU init and gate it at suspend.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 22 ++++++++++++++++++++--
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 +
>>   2 files changed, 21 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index dd6c1c40ab9e..d1f77faebbc0 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -384,15 +384,17 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms)
>>       return 0;
>>   }
>>   -static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms)
>> +static int dpu_kms_parse_icc_paths(struct dpu_kms *dpu_kms)
>>   {
>>       struct icc_path *path0;
>>       struct icc_path *path1;
>> +    struct icc_path *reg_bus_path;
>>       struct drm_device *dev = dpu_kms->dev;
>>       struct device *dpu_dev = dev->dev;
>>         path0 = msm_icc_get(dpu_dev, "mdp0-mem");
>>       path1 = msm_icc_get(dpu_dev, "mdp1-mem");
>> +    reg_bus_path = msm_icc_get(dpu_dev, "cpu-cfg");
>>         if (IS_ERR_OR_NULL(path0))
>>           return PTR_ERR_OR_ZERO(path0);
>> @@ -404,6 +406,10 @@ static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms)
>>           dpu_kms->mdp_path[1] = path1;
>>           dpu_kms->num_mdp_paths++;
>>       }
>> +
>> +    if (!IS_ERR_OR_NULL(reg_bus_path))
>> +        dpu_kms->reg_bus_path = reg_bus_path;
>> +
>>       return 0;
>>   }
>>   @@ -1039,7 +1045,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>           DPU_DEBUG("REG_DMA is not defined");
>>       }
>>   -    dpu_kms_parse_data_bus_icc_path(dpu_kms);
>> +    dpu_kms_parse_icc_paths(dpu_kms);
>>         rc = pm_runtime_resume_and_get(&dpu_kms->pdev->dev);
>>       if (rc < 0)
>> @@ -1241,6 +1247,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
>>       for (i = 0; i < dpu_kms->num_mdp_paths; i++)
>>           icc_set_bw(dpu_kms->mdp_path[i], 0, 0);
>>   +    if (dpu_kms->reg_bus_path)
>> +        icc_set_bw(dpu_kms->reg_bus_path, 0, 0);
>> +
>>       return 0;
>>   }
>>   @@ -1261,6 +1270,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
>>           return rc;
>>       }
>>   +    /*
>> +     * The vendor driver supports setting 76.8 / 150 / 300 Mbps on this
> How do you arrive at these distint BW values? Are they provided by the ICC fwk for the given path?
They're hardcoded in the SDE driver.

Konrad
>> +     * path, but it seems to go for the highest level when display output
>> +     * is enabled and zero otherwise. For simplicity, we can assume that
>> +     * DPU being enabled and running implies that.
>> +     */
>> +    if (dpu_kms->reg_bus_path)
>> +        icc_set_bw(dpu_kms->reg_bus_path, 0, MBps_to_icc(300));
>> +
>>       dpu_vbif_init_memtypes(dpu_kms);
>>         drm_for_each_encoder(encoder, ddev)
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
>> index d5d9bec90705..c332381d58c4 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
>> @@ -111,6 +111,7 @@ struct dpu_kms {
>>       atomic_t bandwidth_ref;
>>       struct icc_path *mdp_path[2];
>>       u32 num_mdp_paths;
>> +    struct icc_path *reg_bus_path;
>>   };
>>     struct vsync_info {
>>