[Freedreno] [PATCH v1 1/5] drm/msm/dpu: add support for DSC encoder v1.2 engine

[Dmitry Baryshkov]

On 21/04/2023 02:25, Kuogee Hsieh wrote:
> Add support for DSC 1.2 by providing the necessary hooks to program
> the DPU DSC 1.2 encoder.
> 
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
>   drivers/gpu/drm/msm/Makefile                   |   1 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  38 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h     |  17 +-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 388 +++++++++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c         |   7 +-
>   5 files changed, 444 insertions(+), 7 deletions(-)
>   create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
> 

[skipped]

> +static inline void _dsc_subblk_offset(struct dpu_hw_dsc *hw_dsc, int s_id,
> +		u32 *offset)
> +{
> +	const struct dpu_dsc_sub_blks *sblk;
> +
> +	sblk = hw_dsc->caps->sblk;
> +
> +	if (s_id == DPU_DSC_ENC)
> +		*offset = sblk->enc.base;
> +	else if (s_id == DPU_DSC_CTL)
> +		*offset = sblk->ctl.base;
> +	else
> +		DPU_ERROR("invalid DSC sub block=%d\n", s_id);
> +}

I have just sent a patchset removing the _sspp_subblk_offset. Could you 
please inline this function too?

> +
> +static void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
> +{
> +	struct dpu_hw_blk_reg_map *hw;
> +	u32 offset;
> +
> +	if (!hw_dsc)
> +		return;
> +
> +	_dsc_subblk_offset(hw_dsc, DPU_DSC_CTL, &offset);
> +
> +	hw = &hw_dsc->hw;
> +	DPU_REG_WRITE(hw, offset + DSC_CFG, 0);
> +
> +	_dsc_subblk_offset(hw_dsc, DPU_DSC_ENC, &offset);
> +
> +	DPU_REG_WRITE(hw, offset + ENC_DF_CTRL, 0);
> +	DPU_REG_WRITE(hw, offset + DSC_MAIN_CONF, 0);
> +}
> +

-- 
With best wishes
Dmitry