[Freedreno] [PATCH 11/16] drm/msm/dpu: add an API to setup the CDM block for writeback
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Aug 31 00:11:05 UTC 2023
On Thu, 31 Aug 2023 at 01:50, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
> Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by
> the writeback encoder to setup the CDM block.
>
> Currently, this is defined and used within the writeback's physical
> encoder layer however, the function can be modified to be used to setup
> the CDM block even for non-writeback interfaces.
>
> Until those modifications are planned and made, keep it local to
> writeback.
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 3 +
> .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 123 +++++++++++++++++-
> 2 files changed, 125 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index 510c1c41ddbc..93a8ae67beff 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -16,6 +16,7 @@
> #include "dpu_hw_pingpong.h"
> #include "dpu_hw_ctl.h"
> #include "dpu_hw_top.h"
> +#include "dpu_hw_cdm.h"
> #include "dpu_encoder.h"
> #include "dpu_crtc.h"
>
> @@ -209,6 +210,7 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
> * @wbirq_refcount: Reference count of writeback interrupt
> * @wb_done_timeout_cnt: number of wb done irq timeout errors
> * @wb_cfg: writeback block config to store fb related details
> + * @cdm_cfg: cdm block config needed to store writeback block's CDM configuration
> * @wb_conn: backpointer to writeback connector
> * @wb_job: backpointer to current writeback job
> * @dest: dpu buffer layout for current writeback output buffer
> @@ -218,6 +220,7 @@ struct dpu_encoder_phys_wb {
> atomic_t wbirq_refcount;
> int wb_done_timeout_cnt;
> struct dpu_hw_wb_cfg wb_cfg;
> + struct dpu_hw_cdm_cfg cdm_cfg;
> struct drm_writeback_connector *wb_conn;
> struct drm_writeback_job *wb_job;
> struct dpu_hw_fmt_layout dest;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> index 4c2736c3ee6d..11935aac9fd5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> @@ -24,6 +24,20 @@
> #define to_dpu_encoder_phys_wb(x) \
> container_of(x, struct dpu_encoder_phys_wb, base)
>
> +#define TO_S15D16(_x_)((_x_) << 7)
> +
> +static struct dpu_csc_cfg dpu_encoder_phys_wb_rgb2yuv_601l = {
> + {
> + TO_S15D16(0x0083), TO_S15D16(0x0102), TO_S15D16(0x0032),
> + TO_S15D16(0x1fb5), TO_S15D16(0x1f6c), TO_S15D16(0x00e1),
> + TO_S15D16(0x00e1), TO_S15D16(0x1f45), TO_S15D16(0x1fdc)
> + },
> + { 0x00, 0x00, 0x00 },
> + { 0x0040, 0x0200, 0x0200 },
> + { 0x000, 0x3ff, 0x000, 0x3ff, 0x000, 0x3ff },
> + { 0x040, 0x3ac, 0x040, 0x3c0, 0x040, 0x3c0 },
> +};
Nit: we probably need to have a single place with all dpu_csc_cfg entries.
> +
> /**
> * dpu_encoder_phys_wb_is_master - report wb always as master encoder
> * @phys_enc: Pointer to physical encoder
> @@ -225,6 +239,112 @@ static void dpu_encoder_phys_wb_setup_ctl(struct dpu_encoder_phys *phys_enc)
> }
> }
>
> +/**
> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down sampling block
> + * @phys_enc:Pointer to physical encoder
> + */
> +static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc)
> +{
> + struct dpu_hw_cdm *hw_cdm;
> + struct dpu_hw_cdm_cfg *cdm_cfg;
> + struct dpu_hw_pingpong *hw_pp;
> + struct dpu_encoder_phys_wb *wb_enc;
> + const struct msm_format *format;
> + const struct dpu_format *dpu_fmt;
> + struct drm_writeback_job *wb_job;
> + int ret;
> +
> + if (!phys_enc)
> + return;
> +
> + wb_enc = to_dpu_encoder_phys_wb(phys_enc);
> + cdm_cfg = &wb_enc->cdm_cfg;
> + hw_pp = phys_enc->hw_pp;
> + hw_cdm = phys_enc->hw_cdm;
> + wb_job = wb_enc->wb_job;
> +
> + format = msm_framebuffer_format(wb_enc->wb_job->fb);
> + dpu_fmt = dpu_get_dpu_format_ext(format->pixel_format, wb_job->fb->modifier);
> +
> + if (!hw_cdm)
> + return;
> +
> + if (!DPU_FORMAT_IS_YUV(dpu_fmt)) {
> + DPU_DEBUG("[enc:%d] cdm_disable fmt:%x\n", DRMID(phys_enc->parent),
> + dpu_fmt->base.pixel_format);
> + if (hw_cdm->ops.disable)
> + hw_cdm->ops.disable(hw_cdm);
> +
> + return;
> + }
> +
> + memset(cdm_cfg, 0, sizeof(struct dpu_hw_cdm_cfg));
> +
> + cdm_cfg->output_width = wb_job->fb->width;
> + cdm_cfg->output_height = wb_job->fb->height;
> + cdm_cfg->output_fmt = dpu_fmt;
> + cdm_cfg->output_type = CDM_CDWN_OUTPUT_WB;
> + cdm_cfg->output_bit_depth = DPU_FORMAT_IS_DX(dpu_fmt) ?
> + CDM_CDWN_OUTPUT_10BIT : CDM_CDWN_OUTPUT_8BIT;
> +
> + /* enable 10 bit logic */
> + switch (cdm_cfg->output_fmt->chroma_sample) {
> + case DPU_CHROMA_RGB:
> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> + break;
> + case DPU_CHROMA_H2V1:
> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> + break;
> + case DPU_CHROMA_420:
> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
> + cdm_cfg->v_cdwn_type = CDM_CDWN_OFFSITE;
> + break;
> + case DPU_CHROMA_H1V2:
> + default:
> + DPU_ERROR("[enc:%d] unsupported chroma sampling type\n",
> + DRMID(phys_enc->parent));
> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> + break;
> + }
> +
> + DPU_DEBUG("[enc:%d] cdm_enable:%d,%d,%X,%d,%d,%d,%d]\n",
> + DRMID(phys_enc->parent), cdm_cfg->output_width,
> + cdm_cfg->output_height, cdm_cfg->output_fmt->base.pixel_format,
> + cdm_cfg->output_type, cdm_cfg->output_bit_depth,
> + cdm_cfg->h_cdwn_type, cdm_cfg->v_cdwn_type);
> +
> + if (hw_cdm && hw_cdm->ops.setup_csc_data) {
> + ret = hw_cdm->ops.setup_csc_data(hw_cdm, &dpu_encoder_phys_wb_rgb2yuv_601l);
> + if (ret < 0) {
> + DPU_ERROR("[enc:%d] failed to setup CSC; ret:%d\n",
> + DRMID(phys_enc->parent), ret);
> + return;
> + }
> + }
> +
> + if (hw_cdm && hw_cdm->ops.setup_cdwn) {
You have checked for (!hw_cdm) several lines above. We can drop this
condition here.
> + ret = hw_cdm->ops.setup_cdwn(hw_cdm, cdm_cfg);
> + if (ret < 0) {
> + DPU_ERROR("[enc:%d] failed to setup CDWN; ret:%d\n",
> + DRMID(phys_enc->parent), ret);
> + return;
> + }
> + }
> +
> + if (hw_cdm && hw_pp && hw_cdm->ops.enable) {
And what if !hw_pp ? Can it happen here? No, if I understand correctly.
> + cdm_cfg->pp_id = hw_pp->idx;
> + ret = hw_cdm->ops.enable(hw_cdm, cdm_cfg);
As we are calling these three ops in a row, can we merge them together
into a single callback to be called from dpu_encoder.c?
> + if (ret < 0) {
> + DPU_ERROR("[enc:%d] failed to enable CDM; ret:%d\n",
> + DRMID(phys_enc->parent), ret);
> + return;
> + }
> + }
> +}
> +
> /**
> * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states
> * @phys_enc: Pointer to physical encoder
> @@ -348,8 +468,9 @@ static void dpu_encoder_phys_wb_setup(
>
> dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
>
> - dpu_encoder_phys_wb_setup_ctl(phys_enc);
> + dpu_encoder_helper_phys_setup_cdm(phys_enc);
>
> + dpu_encoder_phys_wb_setup_ctl(phys_enc);
> }
>
> static void _dpu_encoder_phys_wb_frame_done_helper(void *arg)
> --
> 2.40.1
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list