[Freedreno] [PATCH v3 23/27] drm/msm/dpu: rework dpu_plane_atomic_check()
Abhinav Kumar
quic_abhinavk at quicinc.com
Tue Feb 7 17:49:34 UTC 2023
On 2/3/2023 10:21 AM, Dmitry Baryshkov wrote:
> Split pipe-dependent code from dpu_plane_atomic_check() into the
> separate function dpu_plane_atomic_check_pipe(). This is one of
Same comment as prev patch, dpu_plane_atomic_check_pipe() --->
dpu_plane_atomic_check_sspp()
> preparational steps to add r_pipe support.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 88 ++++++++++++++---------
> 1 file changed, 53 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index f94e132733f3..e69499490d39 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -903,6 +903,51 @@ static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu,
> return 0;
> }
>
> +static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
> + struct dpu_sw_pipe *pipe,
> + struct dpu_hw_sspp_cfg *pipe_cfg,
pipe_cfg --> sspp_cfg
Also, had a question. For function parameters spreading across multiple
lines do we want to align to one guideline? Is it going to be two tabs
more than the prev line or aligning it with the opening brace of prev line?
I am seeing a mix in the prev patch of the series and this one.
> + const struct dpu_format *fmt)
> +{
> + uint32_t min_src_size;
> +
> + min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
> +
> + if (DPU_FORMAT_IS_YUV(fmt) &&
> + (!(pipe->sspp->cap->features & DPU_SSPP_SCALER) ||
> + !(pipe->sspp->cap->features & DPU_SSPP_CSC_ANY))) {
> + DPU_DEBUG_PLANE(pdpu,
> + "plane doesn't have scaler/csc for yuv\n");
> + return -EINVAL;
> + }
> +
> + /* check src bounds */
> + if (drm_rect_width(&pipe_cfg->src_rect) < min_src_size ||
> + drm_rect_height(&pipe_cfg->src_rect) < min_src_size) {
> + DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect));
> + return -E2BIG;
> + }
> +
> + /* valid yuv image */
> + if (DPU_FORMAT_IS_YUV(fmt) &&
> + (pipe_cfg->src_rect.x1 & 0x1 || pipe_cfg->src_rect.y1 & 0x1 ||
> + drm_rect_width(&pipe_cfg->src_rect) & 0x1 ||
> + drm_rect_height(&pipe_cfg->src_rect) & 0x1)) {
> + DPU_DEBUG_PLANE(pdpu, "invalid yuv source " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect));
> + return -EINVAL;
> + }
> +
> + /* min dst support */
> + if (drm_rect_width(&pipe_cfg->dst_rect) < 0x1 || drm_rect_height(&pipe_cfg->dst_rect) < 0x1) {
> + DPU_DEBUG_PLANE(pdpu, "invalid dest rect " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->dst_rect));
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int dpu_plane_atomic_check(struct drm_plane *plane,
> struct drm_atomic_state *state)
> {
> @@ -915,7 +960,7 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> const struct dpu_format *fmt;
> struct dpu_hw_sspp_cfg *pipe_cfg = &pstate->pipe_cfg;
> struct drm_rect fb_rect = { 0 };
> - uint32_t min_src_size, max_linewidth;
> + uint32_t max_linewidth;
> unsigned int rotation;
> uint32_t supported_rotations;
> const struct dpu_sspp_cfg *pipe_hw_caps = pstate->pipe.sspp->cap;
> @@ -970,46 +1015,19 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>
> max_linewidth = pdpu->catalog->caps->max_linewidth;
>
> - fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> -
> - min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
> -
> - if (DPU_FORMAT_IS_YUV(fmt) &&
> - (!(pipe_hw_caps->features & DPU_SSPP_SCALER) ||
> - !(pipe_hw_caps->features & DPU_SSPP_CSC_ANY))) {
> - DPU_DEBUG_PLANE(pdpu,
> - "plane doesn't have scaler/csc for yuv\n");
> - return -EINVAL;
> -
> - /* check src bounds */
> - } else if (drm_rect_width(&pipe_cfg->src_rect) < min_src_size ||
> - drm_rect_height(&pipe_cfg->src_rect) < min_src_size) {
> - DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
> - DRM_RECT_ARG(&pipe_cfg->src_rect));
> - return -E2BIG;
> -
> - /* valid yuv image */
> - } else if (DPU_FORMAT_IS_YUV(fmt) &&
> - (pipe_cfg->src_rect.x1 & 0x1 || pipe_cfg->src_rect.y1 & 0x1 ||
> - drm_rect_width(&pipe_cfg->src_rect) & 0x1 ||
> - drm_rect_height(&pipe_cfg->src_rect) & 0x1)) {
> - DPU_DEBUG_PLANE(pdpu, "invalid yuv source " DRM_RECT_FMT "\n",
> - DRM_RECT_ARG(&pipe_cfg->src_rect));
> - return -EINVAL;
> -
> - /* min dst support */
> - } else if (drm_rect_width(&pipe_cfg->dst_rect) < 0x1 || drm_rect_height(&pipe_cfg->dst_rect) < 0x1) {
> - DPU_DEBUG_PLANE(pdpu, "invalid dest rect " DRM_RECT_FMT "\n",
> - DRM_RECT_ARG(&pipe_cfg->dst_rect));
> - return -EINVAL;
> -
> /* check decimated source width */
> - } else if (drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
> + if (drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
> DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> return -E2BIG;
> }
>
> + fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> +
> + ret = dpu_plane_atomic_check_pipe(pdpu, &pstate->pipe, pipe_cfg, fmt);
> + if (ret)
> + return ret;
> +
> supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
>
> if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
More information about the Freedreno
mailing list