[Freedreno] [RFT PATCH v2 3/3] drm/msm/dsi: More properly handle errors in regards to dsi_mgr_bridge_power_on()
Doug Anderson
dianders at chromium.org
Tue Feb 14 15:24:58 UTC 2023
Hi,
On Mon, Feb 13, 2023 at 6:02 PM Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
> Hi Doug
>
> Sorry for the delayed response.
>
> On 2/2/2023 2:46 PM, Doug Anderson wrote:
> > Hi,
> >
> > On Thu, Feb 2, 2023 at 2:37 PM Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>
> >> Hi Doug
> >>
> >> On 1/31/2023 2:18 PM, Douglas Anderson wrote:
> >>> In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
> >>> time") the error handling with regards to dsi_mgr_bridge_power_on()
> >>> got a bit worse. Specifically if we failed to power the bridge on then
> >>> nothing would really notice. The modeset function couldn't return an
> >>> error and thus we'd blindly go forward and try to do the pre-enable.
> >>>
> >>> In commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time
> >>> for parade-ps8640") we added a special case to move the powerup back
> >>> to pre-enable time for ps8640. When we did that, we didn't try to
> >>> recover the old/better error handling just for ps8640.
> >>>
> >>> In the patch ("drm/msm/dsi: Stop unconditionally powering up DSI hosts
> >>> at modeset") we've now moved the powering up back to exclusively being
> >>> during pre-enable. That means we can add the better error handling
> >>> back in, so let's do it. To do so we'll add a new function
> >>> dsi_mgr_bridge_power_off() that's matches how errors were handled
> >>> prior to commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to
> >>> modeset time").
> >>>
> >>> NOTE: Now that we have dsi_mgr_bridge_power_off(), it feels as if we
> >>> should be calling it in dsi_mgr_bridge_post_disable(). That would make
> >>> some sense, but doing so would change the current behavior and thus
> >>> should be a separate patch. Specifically:
> >>> * dsi_mgr_bridge_post_disable() always calls dsi_mgr_phy_disable()
> >>> even in the slave-DSI case of bonded DSI. We'd need to add special
> >>> handling for this if it's truly needed.
> >>> * dsi_mgr_bridge_post_disable() calls msm_dsi_phy_pll_save_state()
> >>> midway through the poweroff.
> >>> * dsi_mgr_bridge_post_disable() has a different order of some of the
> >>> poweroffs / IRQ disables.
> >>> For now we'll leave dsi_mgr_bridge_post_disable() alone.
> >>>
> >>> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> >>> ---
> >>>
> >>> Changes in v2:
> >>> - ("More properly handle errors...") new for v2.
> >>>
> >>> drivers/gpu/drm/msm/dsi/dsi_manager.c | 32 ++++++++++++++++++++++-----
> >>> 1 file changed, 26 insertions(+), 6 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> >>> index 2197a54b9b96..28b8012a21f2 100644
> >>> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> >>> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> >>> @@ -228,7 +228,7 @@ static void msm_dsi_manager_set_split_display(u8 id)
> >>> }
> >>> }
> >>>
> >>> -static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
> >>> +static int dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
> >>> {
> >>> int id = dsi_mgr_bridge_get_id(bridge);
> >>> struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
> >>> @@ -268,14 +268,31 @@ static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge)
> >>> if (is_bonded_dsi && msm_dsi1)
> >>> msm_dsi_host_enable_irq(msm_dsi1->host);
> >>>
> >>> - return;
> >>> + return 0;
> >>>
> >>> host1_on_fail:
> >>> msm_dsi_host_power_off(host);
> >>> host_on_fail:
> >>> dsi_mgr_phy_disable(id);
> >>> phy_en_fail:
> >>> - return;
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static void dsi_mgr_bridge_power_off(struct drm_bridge *bridge)
> >>> +{
> >>> + int id = dsi_mgr_bridge_get_id(bridge);
> >>> + struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
> >>> + struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1);
> >>> + struct mipi_dsi_host *host = msm_dsi->host;
> >>> + bool is_bonded_dsi = IS_BONDED_DSI();
> >>> +
> >>> + msm_dsi_host_disable_irq(host);
> >>> + if (is_bonded_dsi && msm_dsi1) {
> >>> + msm_dsi_host_disable_irq(msm_dsi1->host);
> >>> + msm_dsi_host_power_off(msm_dsi1->host);
> >>> + }
> >>
> >> The order of disabling the IRQs should be opposite of how they were enabled.
> >>
> >> So while enabling it was DSI0 and then DSI1.
> >>
> >> Hence while disabling it should be DSI1 and then DSI0.
> >>
> >> So the order here should be
> >>
> >> DSI1 irq disable
> >> DSI0 irq disable
> >> DSI1 host power off
> >> DSI0 host power off
> >
> > Right. Normally you want to go opposite. I guess a few points, though:
> >
> > 1. As talked about in the commit message, the order I have matches the
> > order we had prior to commit 7d8e9a90509f ("drm/msm/dsi: move DSI host
> > powerup to modeset time").
> >
> > 2. I'd be curious if it matters. The order you request means we need
> > to check for `(is_bonded_dsi && msm_dsi1)` twice. While that's not a
> > big deal if it's important, it's nice not to have to do so.
> >
> > 3. As talked about in the commit message, eventually we should
> > probably resolve this order with the order of things in
> > dsi_mgr_bridge_post_disable(), which is yet a different ordering.
> > Ideally this resolution would be done by someone who actually has
> > proper documentation of the hardware and how it's supposed to work
> > (AKA not me).
> >
> > So my preference would be to either land or drop ${SUBJECT} patch
> > (either is fine with me) and then someone at Qualcomm could then take
> > over further cleanup.
> >
>
> I do think the ordering matters but you are right, this change brings
> back the ordering we had before so lets handle the re-ordering of all
> places in a separate change. I am okay with this change to go-in, hence
>
> Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>
> What is the plan to land the patches?
>
> 2 & 3 go in msm-next but 1 goes in drm-misc?
We can do that and I'm happy to land patch #1 in drm-misc. Then I
assume we'd want to wait until the change makes its way into mainline
before landing patch #2/#3?
Given how tiny patch #1 is, though, it sure seems like it would be
nice / easier if they all went through the msm tree. I guess we'd want
one of the drm-misc maintainers (not just a committer like me) to Ack
this? Maybe it's not worth it and we should just go the slow route?
-Doug
More information about the Freedreno
mailing list