[Freedreno] [RFC PATCH 1/2] drm/msm/dpu: add dsc helper functions
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Feb 24 21:13:32 UTC 2023
On 24/02/2023 21:40, Kuogee Hsieh wrote:
> Add DSC helper functions based on DSC configuration profiles to produce
> DSC related runtime parameters through both table look up and runtime
> calculation to support DSC on DPU.
>
> There are 6 different DSC configuration profiles are supported currently.
> DSC configuration profiles are differiented by 5 keys, DSC version (V1.1),
> chroma (444/422/420), colorspace (RGB/YUV), bpc(8/10),
> bpp (6/7/7.5/8/9/10/12/15) and SCR (0/1).
>
> Only DSC version V1.1 added and V1.2 will be added later.
These helpers should go to drivers/gpu/drm/display/drm_dsc_helper.c
Also please check that they can be used for i915 or for amdgpu (ideally
for both of them).
I didn't check the tables against the standard (or against the current
source code), will do that later.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
> drivers/gpu/drm/msm/Makefile | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c | 209 +++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h | 34 ++++
> 3 files changed, 244 insertions(+)
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h
>
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 7274c412..28cf52b 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
> disp/dpu1/dpu_hw_catalog.o \
> disp/dpu1/dpu_hw_ctl.o \
> disp/dpu1/dpu_hw_dsc.o \
> + disp/dpu1/dpu_dsc_helper.o \
> disp/dpu1/dpu_hw_interrupts.o \
> disp/dpu1/dpu_hw_intf.o \
> disp/dpu1/dpu_hw_lm.o \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
> new file mode 100644
> index 00000000..88207e9
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023. Qualcomm Innovation Center, Inc. All rights reserved
> + */
> +
> +#include <drm/display/drm_dsc_helper.h>
> +#include "msm_drv.h"
> +#include "dpu_kms.h"
> +#include "dpu_hw_dsc.h"
> +#include "dpu_dsc_helper.h"
> +
> +
Extra empty line
> +#define DPU_DSC_PPS_SIZE 128
> +
> +enum dpu_dsc_ratio_type {
> + DSC_V11_8BPC_8BPP,
> + DSC_V11_10BPC_8BPP,
> + DSC_V11_10BPC_10BPP,
> + DSC_V11_SCR1_8BPC_8BPP,
> + DSC_V11_SCR1_10BPC_8BPP,
> + DSC_V11_SCR1_10BPC_10BPP,
> + DSC_RATIO_TYPE_MAX
> +};
> +
> +
> +static u16 dpu_dsc_rc_buf_thresh[DSC_NUM_BUF_RANGES - 1] = {
> + 0x0e, 0x1c, 0x2a, 0x38, 0x46, 0x54,
> + 0x62, 0x69, 0x70, 0x77, 0x79, 0x7b, 0x7d, 0x7e
Weird indentation
> +};
> +
> +/*
> + * Rate control - Min QP values for each ratio type in dpu_dsc_ratio_type
> + */
> +static char dpu_dsc_rc_range_min_qp[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
> + /* DSC v1.1 */
> + {0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 7, 13},
> + {0, 4, 5, 5, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 17},
> + {0, 4, 5, 6, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 15},
> + /* DSC v1.1 SCR and DSC v1.2 RGB 444 */
What is SCR? Is there any reason to use older min/max Qp params instead
of always using the ones from the VESA-DSC-1.1 standard?
> + {0, 0, 1, 1, 3, 3, 3, 3, 3, 3, 5, 5, 5, 9, 12},
> + {0, 4, 5, 5, 7, 7, 7, 7, 7, 7, 9, 9, 9, 13, 16},
> + {0, 4, 5, 6, 7, 7, 7, 7, 7, 7, 9, 9, 9, 11, 15},
> +};
> +
> +/*
> + * Rate control - Max QP values for each ratio type in dpu_dsc_ratio_type
> + */
> +static char dpu_dsc_rc_range_max_qp[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
> + /* DSC v1.1 */
> + {4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 11, 12, 13, 13, 15},
> + {4, 8, 9, 10, 11, 11, 11, 12, 13, 14, 15, 16, 17, 17, 19},
> + {7, 8, 9, 10, 11, 11, 11, 12, 13, 13, 14, 14, 15, 15, 16},
> + /* DSC v1.1 SCR and DSC v1.2 RGB 444 */
> + {4, 4, 5, 6, 7, 7, 7, 8, 9, 10, 10, 11, 11, 12, 13},
> + {8, 8, 9, 10, 11, 11, 11, 12, 13, 14, 14, 15, 15, 16, 17},
> + {7, 8, 9, 10, 11, 11, 11, 12, 13, 13, 14, 14, 15, 15, 16},
> +};
> +
> +/*
> + * Rate control - bpg offset values for each ratio type in dpu_dsc_ratio_type
> + */
> +static char dpu_dsc_rc_range_bpg[DSC_RATIO_TYPE_MAX][DSC_NUM_BUF_RANGES] = {
> + /* DSC v1.1 */
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
> + /* DSC v1.1 SCR and DSC V1.2 RGB 444 */
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12},
> + {2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -10, -12, -12, -12},
> +};
> +
> +static struct dpu_dsc_rc_init_params_lut {
> + u32 rc_quant_incr_limit0;
> + u32 rc_quant_incr_limit1;
> + u32 initial_fullness_offset;
> + u32 initial_xmit_delay;
> + u32 second_line_bpg_offset;
> + u32 second_line_offset_adj;
> + u32 flatness_min_qp;
> + u32 flatness_max_qp;
> +} dpu_dsc_rc_init_param_lut[] = {
> + /* DSC v1.1 */
> + {11, 11, 6144, 512, 0, 0, 3, 12}, /* DSC_V11_8BPC_8BPP */
> + {15, 15, 6144, 512, 0, 0, 7, 16}, /* DSC_V11_10BPC_8BPP */
> + {15, 15, 5632, 410, 0, 0, 7, 16}, /* DSC_V11_10BPC_10BPP */
> + /* DSC v1.1 SCR and DSC v1.2 RGB 444 */
> + {11, 11, 6144, 512, 0, 0, 3, 12}, /* DSC_V12_444_8BPC_8BPP or DSC_V11_SCR1_8BPC_8BPP */
> + {15, 15, 6144, 512, 0, 0, 7, 16}, /* DSC_V12_444_10BPC_8BPP or DSC_V11_SCR1_10BPC_8BPP */
> + {15, 15, 5632, 410, 0, 0, 7, 16}, /* DSC_V12_444_10BPC_10BPP or DSC_V11_SCR1_10BPC_10BPP */
> +};
> +
> +/**
> + * Maps to lookup the dpu_dsc_ratio_type index used in rate control tables
> + */
> +static struct dpu_dsc_table_index_lut {
> + u32 fmt;
> + u32 scr_ver;
> + u32 minor_ver;
> + u32 bpc;
> + u32 bpp;
> + u32 type;
> +} dpu_dsc_index_map[] = {
> + /* DSC 1.1 formats - scr version is considered */
> + {DPU_DSC_CHROMA_444, 0, 1, 8, 8, DSC_V11_8BPC_8BPP},
> + {DPU_DSC_CHROMA_444, 0, 1, 10, 8, DSC_V11_10BPC_8BPP},
> + {DPU_DSC_CHROMA_444, 0, 1, 10, 10, DSC_V11_10BPC_10BPP},
> + {DPU_DSC_CHROMA_444, 1, 1, 8, 8, DSC_V11_SCR1_8BPC_8BPP},
> + {DPU_DSC_CHROMA_444, 1, 1, 10, 8, DSC_V11_SCR1_10BPC_8BPP},
> + {DPU_DSC_CHROMA_444, 1, 1, 10, 10, DSC_V11_SCR1_10BPC_10BPP},
> +};
> +
> +static int _get_rc_table_index(struct drm_dsc_config *dsc, int scr_ver)
> +{
> + u32 bpp, bpc, i, fmt = DPU_DSC_CHROMA_444;
> +
> + if (dsc->dsc_version_major != 0x1) {
> + DPU_ERROR("unsupported major version %d\n",
> + dsc->dsc_version_major);
> + return -EINVAL;
> + }
> +
> + bpc = dsc->bits_per_component;
> + bpp = DSC_BPP(*dsc);
Just inline the macro.
> +
> + if (dsc->native_422)
> + fmt = DPU_DSC_CHROMA_422;
> + else if (dsc->native_420)
> + fmt = DPU_DSC_CHROMA_420;
> +
> +
> + for (i = 0; i < ARRAY_SIZE(dpu_dsc_index_map); i++) {
> + if (dsc->dsc_version_minor == dpu_dsc_index_map[i].minor_ver &&
> + fmt == dpu_dsc_index_map[i].fmt &&
> + bpc == dpu_dsc_index_map[i].bpc &&
> + bpp == dpu_dsc_index_map[i].bpp &&
> + (dsc->dsc_version_minor != 0x1 ||
> + scr_ver == dpu_dsc_index_map[i].scr_ver))
> + return dpu_dsc_index_map[i].type;
> + }
> +
> + DPU_ERROR("unsupported DSC v%d.%dr%d, bpc:%d, bpp:%d, fmt:0x%x\n",
> + dsc->dsc_version_major, dsc->dsc_version_minor,
> + scr_ver, bpc, bpp, fmt);
> + return -EINVAL;
> +}
> +
> +int dpu_dsc_populate_dsc_config(struct drm_dsc_config *dsc, int scr_ver)
> +{
> + int bpp, bpc;
> + struct dpu_dsc_rc_init_params_lut *rc_param_lut;
> + int i, ratio_idx;
> +
> + dsc->rc_model_size = 8192;
> +
> + if ((dsc->dsc_version_major == 0x1) &&
> + (dsc->dsc_version_minor == 0x1)) {
indent to the opening bracket please, so that '(dsc' on both lines start
on the same position.
> + if (scr_ver == 0x1)
> + dsc->first_line_bpg_offset = 15;
> + else
> + dsc->first_line_bpg_offset = 12;
> + }
> +
> + dsc->rc_edge_factor = 6;
> + dsc->rc_tgt_offset_high = 3;
> + dsc->rc_tgt_offset_low = 3;
> + dsc->simple_422 = 0;
> + dsc->convert_rgb = !(dsc->native_422 | dsc->native_420);
> + dsc->vbr_enable = 0;
> +
> + bpp = DSC_BPP(*dsc);
inline the macro.
> + bpc = dsc->bits_per_component;
> +
> + ratio_idx = _get_rc_table_index(dsc, scr_ver);
> + if ((ratio_idx < 0) || (ratio_idx >= DSC_RATIO_TYPE_MAX))
> + return -EINVAL;
> +
> +
> + for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++)
> + dsc->rc_buf_thresh[i] = dpu_dsc_rc_buf_thresh[i];
Can we use memcpy?
> +
> + for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> + dsc->rc_range_params[i].range_min_qp =
> + dpu_dsc_rc_range_min_qp[ratio_idx][i];
> + dsc->rc_range_params[i].range_max_qp =
> + dpu_dsc_rc_range_max_qp[ratio_idx][i];
> + dsc->rc_range_params[i].range_bpg_offset =
> + dpu_dsc_rc_range_bpg[ratio_idx][i];
> + }
> +
> + rc_param_lut = &dpu_dsc_rc_init_param_lut[ratio_idx];
> + dsc->rc_quant_incr_limit0 = rc_param_lut->rc_quant_incr_limit0;
> + dsc->rc_quant_incr_limit1 = rc_param_lut->rc_quant_incr_limit1;
> + dsc->initial_offset = rc_param_lut->initial_fullness_offset;
> + dsc->initial_xmit_delay = rc_param_lut->initial_xmit_delay;
> + dsc->second_line_bpg_offset = rc_param_lut->second_line_bpg_offset;
> + dsc->second_line_offset_adj = rc_param_lut->second_line_offset_adj;
> + dsc->flatness_min_qp = rc_param_lut->flatness_min_qp;
> + dsc->flatness_max_qp = rc_param_lut->flatness_max_qp;
> +
> +
> + dsc->line_buf_depth = bpc + 1;
> + dsc->mux_word_size = bpc > 10 ? DSC_MUX_WORD_SIZE_12_BPC : DSC_MUX_WORD_SIZE_8_10_BPC;
> +
> + dsc->initial_scale_value = 8 * dsc->rc_model_size /
> + (dsc->rc_model_size - dsc->initial_offset);
> +
> + return drm_dsc_compute_rc_parameters(dsc);
Indentation is wrong
> +}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h
> new file mode 100644
> index 00000000..4a23e02
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_dsc_helper.h
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023. Qualcomm Innovation Center, Inc. All rights reserved
> + */
> +
> +#ifndef __DPU_DSC_HELPER_H__
> +#define __DPU_DSC_HELPER_H__
> +
> +#include "msm_drv.h"
> +
> +#define DSC_1_1_PPS_PARAMETER_SET_ELEMENTS 88
What is this? Does it need to be global?
> +
> +/**
> + * Bits/pixel target >> 4 (removing the fractional bits)
> + * returns the integer bpp value from the drm_dsc_config struct
> + */
> +#define DSC_BPP(config) ((config).bits_per_pixel >> 4)
> +
> +enum dpu_dsc_chroma {
> + DPU_DSC_CHROMA_444,
> + DPU_DSC_CHROMA_422,
> + DPU_DSC_CHROMA_420,
> +};
I think this enum is also not used outside of your helpers.
> +
> +int dpu_dsc_populate_dsc_config(struct drm_dsc_config *dsc, int scr_ver);
> +
> +bool dpu_dsc_ich_reset_override_needed(bool pu_en, struct drm_dsc_config *dsc);
Unused
> +
> +int dpu_dsc_initial_line_calc( u32 num_active_ss_per_enc,
> + struct drm_dsc_config *dsc,
> + int enc_ip_width, int dsc_cmn_mode);
Unused
> +
> +#endif /* __DPU_DSC_HELPER_H__ */
> +
--
With best wishes
Dmitry
More information about the Freedreno
mailing list