[Freedreno] [RFC PATCH v2 2/3] drm: Adjust atomic checks for solid fill color
Jessica Zhang
quic_jesszhan at quicinc.com
Wed Jan 4 01:27:17 UTC 2023
On 12/22/2022 7:08 PM, Dmitry Baryshkov wrote:
> On 23/12/2022 00:14, Jessica Zhang wrote:
>> Loosen the requirements for atomic and legacy commit so that, in cases
>> where solid fill planes is enabled (and FB_ID is NULL), the commit can
>> still go through.
>>
>> In addition, add framebuffer NULL checks in other areas to account for
>> FB being NULL when solid fill is enabled.
>>
>> Changes in V2:
>> - Changed to checks for if solid_fill_blob is set (Dmitry)
>> - Abstracted (plane_state && !solid_fill_blob) checks to helper method
>> (Dmitry)
>> - Fixed indentation issue (Dmitry)
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>> ---
>> drivers/gpu/drm/drm_atomic.c | 69 ++++++++++++++++-------------
>> drivers/gpu/drm/drm_atomic_helper.c | 34 ++++++++------
>> drivers/gpu/drm/drm_plane.c | 8 ++--
>> include/drm/drm_atomic_helper.h | 6 ++-
>> include/drm/drm_plane.h | 12 +++++
>> 5 files changed, 78 insertions(+), 51 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
>> index f197f59f6d99..b92d75bda7fd 100644
>> --- a/drivers/gpu/drm/drm_atomic.c
>> +++ b/drivers/gpu/drm/drm_atomic.c
>> @@ -601,8 +601,10 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> uint32_t num_clips;
>> int ret;
>> - /* either *both* CRTC and FB must be set, or neither */
>> - if (crtc && !fb) {
>> + /* When solid_fill is disabled,
>> + * either *both* CRTC and FB must be set, or neither
>> + */
>
> The cause and effect logic seems to be broken here. I'd expect something
> like: "When CRTC is set, at least one of fb and solid_fill should be set."
>
> Also it might be worth defining
> bool drm_plane_has_visible_data(struct drm_plane_state *state)
> {
> return state->fb || drm_plane_solid_fill_enabled(state);
> }
>
> Then you can use this function here and below, where you check both fb
> and solid_fill property.
Hi Dmitry,
Sounds good, that makes more sense.
>
>> + if (crtc && !fb && !new_plane_state->solid_fill_blob) {
>> drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] CRTC set but no
>> FB\n",
>> plane->base.id, plane->name);
>> return -EINVAL;
>> @@ -626,14 +628,17 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> }
>> /* Check whether this plane supports the fb pixel format. */
>> - ret = drm_plane_check_pixel_format(plane, fb->format->format,
>> - fb->modifier);
>> - if (ret) {
>> - drm_dbg_atomic(plane->dev,
>> - "[PLANE:%d:%s] invalid pixel format %p4cc,
>> modifier 0x%llx\n",
>> - plane->base.id, plane->name,
>> - &fb->format->format, fb->modifier);
>> - return ret;
>> + if (fb) {
>> + ret = drm_plane_check_pixel_format(plane, fb->format->format,
>> + fb->modifier);
>> +
>> + if (ret) {
>> + drm_dbg_atomic(plane->dev,
>> + "[PLANE:%d:%s] invalid pixel format %p4cc,
>> modifier 0x%llx\n",
>> + plane->base.id, plane->name,
>> + &fb->format->format, fb->modifier);
>> + return ret;
>> + }
>
> I'd suggest merging twof if(fb) blocks and extracting them to a separate
> functions.
Noted.
>
>> }
>> /* Give drivers some help against integer overflows */
>> @@ -649,28 +654,30 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> return -ERANGE;
>> }
>> - fb_width = fb->width << 16;
>> - fb_height = fb->height << 16;
>> + if (fb) {
>> + fb_width = fb->width << 16;
>> + fb_height = fb->height << 16;
>> - /* Make sure source coordinates are inside the fb. */
>> - if (new_plane_state->src_w > fb_width ||
>> - new_plane_state->src_x > fb_width - new_plane_state->src_w ||
>> - new_plane_state->src_h > fb_height ||
>> - new_plane_state->src_y > fb_height - new_plane_state->src_h) {
>> - drm_dbg_atomic(plane->dev,
>> - "[PLANE:%d:%s] invalid source coordinates "
>> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->src_w >> 16,
>> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_h >> 16,
>> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_x >> 16,
>> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_y >> 16,
>> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> - fb->width, fb->height);
>> - return -ENOSPC;
>> + /* Make sure source coordinates are inside the fb. */
>> + if (new_plane_state->src_w > fb_width ||
>> + new_plane_state->src_x > fb_width -
>> new_plane_state->src_w ||
>> + new_plane_state->src_h > fb_height ||
>> + new_plane_state->src_y > fb_height -
>> new_plane_state->src_h) {
>> + drm_dbg_atomic(plane->dev,
>> + "[PLANE:%d:%s] invalid source coordinates "
>> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> + plane->base.id, plane->name,
>> + new_plane_state->src_w >> 16,
>> + ((new_plane_state->src_w & 0xffff) * 15625) >>
>> 10,
>> + new_plane_state->src_h >> 16,
>> + ((new_plane_state->src_h & 0xffff) * 15625) >>
>> 10,
>> + new_plane_state->src_x >> 16,
>> + ((new_plane_state->src_x & 0xffff) * 15625) >>
>> 10,
>> + new_plane_state->src_y >> 16,
>> + ((new_plane_state->src_y & 0xffff) * 15625) >>
>> 10,
>> + fb->width, fb->height);
>> + return -ENOSPC;
>> + }
>> }
>> clips = __drm_plane_get_damage_clips(new_plane_state);
>> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
>> b/drivers/gpu/drm/drm_atomic_helper.c
>> index 1a586b3c454b..b53897f882c1 100644
>> --- a/drivers/gpu/drm/drm_atomic_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_helper.c
>> @@ -864,7 +864,7 @@ int drm_atomic_helper_check_plane_state(struct
>> drm_plane_state *plane_state,
>> *src = drm_plane_state_src(plane_state);
>> *dst = drm_plane_state_dest(plane_state);
>> - if (!fb) {
>> + if (!fb && !drm_plane_solid_fill_enabled(plane_state)) {
>> plane_state->visible = false;
>> return 0;
>> }
>> @@ -881,25 +881,31 @@ int drm_atomic_helper_check_plane_state(struct
>> drm_plane_state *plane_state,
>> return -EINVAL;
>> }
>> - drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation);
>> + if (fb) {
>> + drm_rect_rotate(src, fb->width << 16, fb->height << 16,
>> rotation);
>> - /* Check scaling */
>> - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
>> - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
>> - if (hscale < 0 || vscale < 0) {
>> - drm_dbg_kms(plane_state->plane->dev,
>> - "Invalid scaling of plane\n");
>> - drm_rect_debug_print("src: ", &plane_state->src, true);
>> - drm_rect_debug_print("dst: ", &plane_state->dst, false);
>> - return -ERANGE;
>> + /* Check scaling */
>> + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
>> + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
>> +
>> + if (hscale < 0 || vscale < 0) {
>> + drm_dbg_kms(plane_state->plane->dev,
>> + "Invalid scaling of plane\n");
>> + drm_rect_debug_print("src: ", &plane_state->src, true);
>> + drm_rect_debug_print("dst: ", &plane_state->dst, false);
>> + return -ERANGE;
>> + }
>> }
>> if (crtc_state->enable)
>> drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2);
>> - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
>> -
>> - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
>> rotation);
>> + if (drm_plane_solid_fill_enabled(plane_state)) {
>> + plane_state->visible = true;
>> + } else if (fb) {
>> + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
>> + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
>> rotation);
>> + }
>
> I'd invert the order here:
>
> if (fb)
> ....
> else if (drm_plane_solid_fill_enabled(...)
> ....
>
Noted.
>> if (!plane_state->visible)
>> /*
>> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
>> index 33357629a7f5..bdce2acbef6a 100644
>> --- a/drivers/gpu/drm/drm_plane.c
>> +++ b/drivers/gpu/drm/drm_plane.c
>> @@ -856,8 +856,8 @@ static int __setplane_internal(struct drm_plane
>> *plane,
>> WARN_ON(drm_drv_uses_atomic_modeset(plane->dev));
>> - /* No fb means shut it down */
>> - if (!fb) {
>> + /* No fb and no color fill means shut it down */
>> + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) {
>> plane->old_fb = plane->fb;
>> ret = plane->funcs->disable_plane(plane, ctx);
>> if (!ret) {
>> @@ -908,8 +908,8 @@ static int __setplane_atomic(struct drm_plane *plane,
>> WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev));
>> - /* No fb means shut it down */
>> - if (!fb)
>> + /* No fb and no color fill means shut it down */
>> + if (!fb && !drm_plane_solid_fill_enabled(plane->state))
>> return plane->funcs->disable_plane(plane, ctx);
>> /*
>> diff --git a/include/drm/drm_atomic_helper.h
>> b/include/drm/drm_atomic_helper.h
>> index 33f982cd1a27..16a2a8edcc68 100644
>> --- a/include/drm/drm_atomic_helper.h
>> +++ b/include/drm/drm_atomic_helper.h
>> @@ -230,8 +230,10 @@ drm_atomic_plane_disabling(struct drm_plane_state
>> *old_plane_state,
>> * Anything else should be considered a bug in the atomic core,
>> so we
>> * gently warn about it.
>> */
>> - WARN_ON((new_plane_state->crtc == NULL && new_plane_state->fb !=
>> NULL) ||
>> - (new_plane_state->crtc != NULL && new_plane_state->fb == NULL));
>> + WARN_ON(!new_plane_state->solid_fill_blob &&
>> + ((new_plane_state->crtc == NULL && new_plane_state->fb !=
>> NULL) ||
>> + (new_plane_state->crtc != NULL &&
>> + new_plane_state->fb == NULL)));
>
> Not quite. This means that if solid_fill_blob is set, then it doesn't
> matter whether crtc or fb is NULL.
Good point -- will change the conditional to something similar to the
one in drm_atomic_plane_check()
>
> Also please fix the indentation of your changes. Original code was
> logical, your indent is not.
Ah, I see what you mean. Should have aligned the parentheses instead of
indenting more.
Thanks,
Jessica Zhang
>
>> return old_plane_state->crtc && !new_plane_state->crtc;
>> }
>> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
>> index be5ab5f7b477..a9e6a09a75f7 100644
>> --- a/include/drm/drm_plane.h
>> +++ b/include/drm/drm_plane.h
>> @@ -977,6 +977,18 @@ static inline struct drm_plane
>> *drm_plane_find(struct drm_device *dev,
>> #define drm_for_each_plane(plane, dev) \
>> list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
>> +/**
>> + * drm_plane_solid_fill_enabled - Check if solid fill is enabled on
>> plane
>> + * @state: plane state
>> + *
>> + * Returns:
>> + * Whether the plane has been assigned a solid_fill_blob
>> + */
>> +static inline bool drm_plane_solid_fill_enabled(struct
>> drm_plane_state *state)
>> +{
>> + return state && state->solid_fill_blob;
>> +}
>> +
>> bool drm_any_plane_has_format(struct drm_device *dev,
>> u32 format, u64 modifier);
>
> --
> With best wishes
> Dmitry
>
More information about the Freedreno
mailing list