[Freedreno] [RFC PATCH v3 2/3] drm: Adjust atomic checks for solid fill color
Jessica Zhang
quic_jesszhan at quicinc.com
Fri Jan 6 20:51:13 UTC 2023
On 1/4/2023 5:57 PM, Dmitry Baryshkov wrote:
> On 05/01/2023 01:40, Jessica Zhang wrote:
>> Loosen the requirements for atomic and legacy commit so that, in cases
>> where solid fill planes is enabled (and FB_ID is NULL), the commit can
>> still go through.
>>
>> In addition, add framebuffer NULL checks in other areas to account for
>> FB being NULL when solid fill is enabled.
>>
>> Changes in V2:
>> - Changed to checks for if solid_fill_blob is set (Dmitry)
>> - Abstracted (plane_state && !solid_fill_blob) checks to helper method
>> (Dmitry)
>> - Fixed indentation issue (Dmitry)
>>
>> Changes in V3:
>> - Created drm_plane_has_visible_data() helper and corrected CRTC and FB
>> NULL-check logic (Dmitry)
>> - Merged `if (fb)` blocks in drm_atomic_plane_check() and abstracted
>> them into helper method (Dmitry)
>> - Inverted `if (solid_fill_enabled) else if (fb)` check order (Dmitry)
>> - Fixed indentation (Dmitry)
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>> ---
>> drivers/gpu/drm/drm_atomic.c | 136 ++++++++++++++++------------
>> drivers/gpu/drm/drm_atomic_helper.c | 34 ++++---
>> drivers/gpu/drm/drm_plane.c | 8 +-
>> include/drm/drm_atomic_helper.h | 5 +-
>> include/drm/drm_plane.h | 19 ++++
>> 5 files changed, 124 insertions(+), 78 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
>> index f197f59f6d99..63f34b430479 100644
>> --- a/drivers/gpu/drm/drm_atomic.c
>> +++ b/drivers/gpu/drm/drm_atomic.c
>> @@ -580,6 +580,76 @@ plane_switching_crtc(const struct drm_plane_state
>> *old_plane_state,
>> return true;
>> }
>> +static int drm_atomic_check_fb(const struct drm_plane_state *state)
>
> This change should go to a separate patch. Please don't mix refactoring
> (moving of the code) with the actual functionality changes.
Hi Dmitry,
Acked.
>
>> +{
>> + struct drm_plane *plane = state->plane;
>> + const struct drm_framebuffer *fb = state->fb;
>> + struct drm_mode_rect *clips;
>> +
>> + uint32_t num_clips;
>> + unsigned int fb_width, fb_height;
>> + int ret;
>> +
>> + /* Check whether this plane supports the fb pixel format. */
>> + ret = drm_plane_check_pixel_format(plane, fb->format->format,
>> + fb->modifier);
>> +
>> + if (ret) {
>> + drm_dbg_atomic(plane->dev,
>> + "[PLANE:%d:%s] invalid pixel format %p4cc,
>> modifier 0x%llx\n",
>> + plane->base.id, plane->name,
>> + &fb->format->format, fb->modifier);
>> + return ret;
>> + }
>> +
>> + fb_width = fb->width << 16;
>> + fb_height = fb->height << 16;
>> +
>> + /* Make sure source coordinates are inside the fb. */
>> + if (state->src_w > fb_width ||
>> + state->src_x > fb_width - state->src_w ||
>> + state->src_h > fb_height ||
>> + state->src_y > fb_height - state->src_h) {
>> + drm_dbg_atomic(plane->dev,
>> + "[PLANE:%d:%s] invalid source coordinates "
>> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> + plane->base.id, plane->name,
>> + state->src_w >> 16,
>> + ((state->src_w & 0xffff) * 15625) >> 10,
>> + state->src_h >> 16,
>> + ((state->src_h & 0xffff) * 15625) >> 10,
>> + state->src_x >> 16,
>> + ((state->src_x & 0xffff) * 15625) >> 10,
>> + state->src_y >> 16,
>> + ((state->src_y & 0xffff) * 15625) >> 10,
>> + fb->width, fb->height);
>> + return -ENOSPC;
>> + }
>> +
>> + clips = __drm_plane_get_damage_clips(state);
>> + num_clips = drm_plane_get_damage_clips_count(state);
>> +
>> + /* Make sure damage clips are valid and inside the fb. */
>> + while (num_clips > 0) {
>> + if (clips->x1 >= clips->x2 ||
>> + clips->y1 >= clips->y2 ||
>> + clips->x1 < 0 ||
>> + clips->y1 < 0 ||
>> + clips->x2 > fb_width ||
>> + clips->y2 > fb_height) {
>> + drm_dbg_atomic(plane->dev,
>> + "[PLANE:%d:%s] invalid damage clip %d %d %d
>> %d\n",
>> + plane->base.id, plane->name, clips->x1,
>> + clips->y1, clips->x2, clips->y2);
>> + return -EINVAL;
>> + }
>> + clips++;
>> + num_clips--;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * drm_atomic_plane_check - check plane state
>> * @old_plane_state: old plane state to check
>> @@ -596,13 +666,12 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> struct drm_plane *plane = new_plane_state->plane;
>> struct drm_crtc *crtc = new_plane_state->crtc;
>> const struct drm_framebuffer *fb = new_plane_state->fb;
>> - unsigned int fb_width, fb_height;
>> - struct drm_mode_rect *clips;
>> - uint32_t num_clips;
>> int ret;
>> - /* either *both* CRTC and FB must be set, or neither */
>> - if (crtc && !fb) {
>> + /* When solid_fill is disabled,
>> + * either *both* CRTC and FB must be set, or neither
>> + */
>> + if (crtc && !drm_atomic_has_visible_data(new_plane_state)) {
>> drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] CRTC set but no
>> FB\n",
>> plane->base.id, plane->name);
>> return -EINVAL;
>> @@ -625,17 +694,6 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> return -EINVAL;
>> }
>> - /* Check whether this plane supports the fb pixel format. */
>> - ret = drm_plane_check_pixel_format(plane, fb->format->format,
>> - fb->modifier);
>> - if (ret) {
>> - drm_dbg_atomic(plane->dev,
>> - "[PLANE:%d:%s] invalid pixel format %p4cc,
>> modifier 0x%llx\n",
>> - plane->base.id, plane->name,
>> - &fb->format->format, fb->modifier);
>> - return ret;
>> - }
>> -
>> /* Give drivers some help against integer overflows */
>> if (new_plane_state->crtc_w > INT_MAX ||
>> new_plane_state->crtc_x > INT_MAX - (int32_t)
>> new_plane_state->crtc_w ||
>> @@ -649,49 +707,11 @@ static int drm_atomic_plane_check(const struct
>> drm_plane_state *old_plane_state,
>> return -ERANGE;
>> }
>> - fb_width = fb->width << 16;
>> - fb_height = fb->height << 16;
>> - /* Make sure source coordinates are inside the fb. */
>> - if (new_plane_state->src_w > fb_width ||
>> - new_plane_state->src_x > fb_width - new_plane_state->src_w ||
>> - new_plane_state->src_h > fb_height ||
>> - new_plane_state->src_y > fb_height - new_plane_state->src_h) {
>> - drm_dbg_atomic(plane->dev,
>> - "[PLANE:%d:%s] invalid source coordinates "
>> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
>> - plane->base.id, plane->name,
>> - new_plane_state->src_w >> 16,
>> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_h >> 16,
>> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_x >> 16,
>> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
>> - new_plane_state->src_y >> 16,
>> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
>> - fb->width, fb->height);
>> - return -ENOSPC;
>> - }
>> -
>> - clips = __drm_plane_get_damage_clips(new_plane_state);
>> - num_clips = drm_plane_get_damage_clips_count(new_plane_state);
>> -
>> - /* Make sure damage clips are valid and inside the fb. */
>> - while (num_clips > 0) {
>> - if (clips->x1 >= clips->x2 ||
>> - clips->y1 >= clips->y2 ||
>> - clips->x1 < 0 ||
>> - clips->y1 < 0 ||
>> - clips->x2 > fb_width ||
>> - clips->y2 > fb_height) {
>> - drm_dbg_atomic(plane->dev,
>> - "[PLANE:%d:%s] invalid damage clip %d %d %d
>> %d\n",
>> - plane->base.id, plane->name, clips->x1,
>> - clips->y1, clips->x2, clips->y2);
>> - return -EINVAL;
>> - }
>> - clips++;
>> - num_clips--;
>> + if (fb) {
>> + ret = drm_atomic_check_fb(new_plane_state);
>> + if (ret)
>> + return ret;
>> }
>> if (plane_switching_crtc(old_plane_state, new_plane_state)) {
>> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
>> b/drivers/gpu/drm/drm_atomic_helper.c
>> index 1a586b3c454b..804ae107ae59 100644
>> --- a/drivers/gpu/drm/drm_atomic_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_helper.c
>> @@ -864,7 +864,7 @@ int drm_atomic_helper_check_plane_state(struct
>> drm_plane_state *plane_state,
>> *src = drm_plane_state_src(plane_state);
>> *dst = drm_plane_state_dest(plane_state);
>> - if (!fb) {
>> + if (!fb && !drm_plane_solid_fill_enabled(plane_state)) {
>
> You have the helper for this check.
Noted.
Thanks,
Jessica Zhang
>
>> plane_state->visible = false;
>> return 0;
>> }
>> @@ -881,25 +881,31 @@ int drm_atomic_helper_check_plane_state(struct
>> drm_plane_state *plane_state,
>> return -EINVAL;
>> }
>> - drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation);
>> + if (fb) {
>> + drm_rect_rotate(src, fb->width << 16, fb->height << 16,
>> rotation);
>> - /* Check scaling */
>> - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
>> - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
>> - if (hscale < 0 || vscale < 0) {
>> - drm_dbg_kms(plane_state->plane->dev,
>> - "Invalid scaling of plane\n");
>> - drm_rect_debug_print("src: ", &plane_state->src, true);
>> - drm_rect_debug_print("dst: ", &plane_state->dst, false);
>> - return -ERANGE;
>> + /* Check scaling */
>> + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
>> + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
>> +
>> + if (hscale < 0 || vscale < 0) {
>> + drm_dbg_kms(plane_state->plane->dev,
>> + "Invalid scaling of plane\n");
>> + drm_rect_debug_print("src: ", &plane_state->src, true);
>> + drm_rect_debug_print("dst: ", &plane_state->dst, false);
>> + return -ERANGE;
>> + }
>> }
>> if (crtc_state->enable)
>> drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2);
>> - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
>> -
>> - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
>> rotation);
>> + if (fb) {
>> + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
>> + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
>> rotation);
>> + } else if (drm_plane_solid_fill_enabled(plane_state)) {
>> + plane_state->visible = true;
>> + }
>> if (!plane_state->visible)
>> /*
>> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
>> index 33357629a7f5..bdce2acbef6a 100644
>> --- a/drivers/gpu/drm/drm_plane.c
>> +++ b/drivers/gpu/drm/drm_plane.c
>> @@ -856,8 +856,8 @@ static int __setplane_internal(struct drm_plane
>> *plane,
>> WARN_ON(drm_drv_uses_atomic_modeset(plane->dev));
>> - /* No fb means shut it down */
>> - if (!fb) {
>> + /* No fb and no color fill means shut it down */
>> + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) {
>
> And here. And below.
>
>> plane->old_fb = plane->fb;
>> ret = plane->funcs->disable_plane(plane, ctx);
>> if (!ret) {
>> @@ -908,8 +908,8 @@ static int __setplane_atomic(struct drm_plane *plane,
>> WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev));
>> - /* No fb means shut it down */
>> - if (!fb)
>> + /* No fb and no color fill means shut it down */
>> + if (!fb && !drm_plane_solid_fill_enabled(plane->state))
>> return plane->funcs->disable_plane(plane, ctx);
>> /*
>> diff --git a/include/drm/drm_atomic_helper.h
>> b/include/drm/drm_atomic_helper.h
>> index 33f982cd1a27..a87997b3e0b5 100644
>> --- a/include/drm/drm_atomic_helper.h
>> +++ b/include/drm/drm_atomic_helper.h
>> @@ -230,8 +230,9 @@ drm_atomic_plane_disabling(struct drm_plane_state
>> *old_plane_state,
>> * Anything else should be considered a bug in the atomic core,
>> so we
>> * gently warn about it.
>> */
>> - WARN_ON((new_plane_state->crtc == NULL && new_plane_state->fb !=
>> NULL) ||
>> - (new_plane_state->crtc != NULL && new_plane_state->fb == NULL));
>> + WARN_ON(((new_plane_state->crtc == NULL && new_plane_state->fb !=
>> NULL) ||
>
> This condition also needs to be adjusted.
>
>> + (new_plane_state->crtc != NULL &&
>> + !drm_atomic_has_visible_data(new_plane_state))));
>> return old_plane_state->crtc && !new_plane_state->crtc;
>> }
>> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
>> index 3b9da06f358b..3bc6b8d73e8a 100644
>> --- a/include/drm/drm_plane.h
>> +++ b/include/drm/drm_plane.h
>> @@ -977,6 +977,25 @@ static inline struct drm_plane
>> *drm_plane_find(struct drm_device *dev,
>> #define drm_for_each_plane(plane, dev) \
>> list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
>> +/**
>> + * drm_plane_solid_fill_enabled - Check if solid fill is enabled on
>> plane
>> + * @state: plane state
>> + *
>> + * Returns:
>> + * Whether the plane has been assigned a solid_fill_blob
>> + */
>> +static inline bool drm_plane_solid_fill_enabled(struct
>> drm_plane_state *state)
>> +{
>> + return state && state->solid_fill_blob;
>> +}
>> +
>> +static inline bool
>> +drm_atomic_has_visible_data(const struct drm_plane_state *state)
>> +{
>> + return state->fb || state->solid_fill_blob;
>> +}
>> +
>> +
>> bool drm_any_plane_has_format(struct drm_device *dev,
>> u32 format, u64 modifier);
>
> --
> With best wishes
> Dmitry
>
More information about the Freedreno
mailing list