[Freedreno] [PATCH v2 12/13] drm/bridge: lt9611: stop filtering modes via the table

[Dmitry Baryshkov]

On 11/01/2023 12:57, Neil Armstrong wrote:
> On 08/01/2023 17:56, Dmitry Baryshkov wrote:
>> The lt9611 bridge can support different modes, it makes no sense to list
>> them in the table. Drop the table and check the number of interfaces
>> using the fixed value.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>   drivers/gpu/drm/bridge/lontium-lt9611.c | 41 +++----------------------
>>   1 file changed, 4 insertions(+), 37 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c 
>> b/drivers/gpu/drm/bridge/lontium-lt9611.c
>> index 82af1f954cc6..df9f015aa3a0 100644
>> --- a/drivers/gpu/drm/bridge/lontium-lt9611.c
>> +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
>> @@ -84,24 +84,6 @@ static const struct regmap_config 
>> lt9611_regmap_config = {
>>       .num_ranges = ARRAY_SIZE(lt9611_ranges),
>>   };
>> -struct lt9611_mode {
>> -    u16 hdisplay;
>> -    u16 vdisplay;
>> -    u8 vrefresh;
>> -    u8 lanes;
>> -    u8 intfs;
>> -};
>> -
>> -static struct lt9611_mode lt9611_modes[] = {
>> -    { 3840, 2160, 30, 4, 2 }, /* 3840x2160 24bit 30Hz 4Lane 2ports */
>> -    { 1920, 1080, 60, 4, 1 }, /* 1080P 24bit 60Hz 4lane 1port */
>> -    { 1920, 1080, 30, 3, 1 }, /* 1080P 24bit 30Hz 3lane 1port */
>> -    { 1920, 1080, 24, 3, 1 },
>> -    { 720, 480, 60, 4, 1 },
>> -    { 720, 576, 50, 2, 1 },
>> -    { 640, 480, 60, 2, 1 },
>> -};
>> -
>>   static struct lt9611 *bridge_to_lt9611(struct drm_bridge *bridge)
>>   {
>>       return container_of(bridge, struct lt9611, bridge);
>> @@ -603,21 +585,6 @@ static int lt9611_regulator_enable(struct lt9611 
>> *lt9611)
>>       return 0;
>>   }
>> -static struct lt9611_mode *lt9611_find_mode(const struct 
>> drm_display_mode *mode)
>> -{
>> -    int i;
>> -
>> -    for (i = 0; i < ARRAY_SIZE(lt9611_modes); i++) {
>> -        if (lt9611_modes[i].hdisplay == mode->hdisplay &&
>> -            lt9611_modes[i].vdisplay == mode->vdisplay &&
>> -            lt9611_modes[i].vrefresh == drm_mode_vrefresh(mode)) {
>> -            return &lt9611_modes[i];
>> -        }
>> -    }
>> -
>> -    return NULL;
>> -}
>> -
>>   static enum drm_connector_status lt9611_bridge_detect(struct 
>> drm_bridge *bridge)
>>   {
>>       struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
>> @@ -832,12 +799,12 @@ static enum drm_mode_status 
>> lt9611_bridge_mode_valid(struct drm_bridge *bridge,
>>                                const struct drm_display_info *info,
>>                                const struct drm_display_mode *mode)
>>   {
>> -    struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);
>>       struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
>> -    if (!lt9611_mode)
>> -        return MODE_BAD;
>> -    else if (lt9611_mode->intfs > 1 && !lt9611->dsi1)
>> +    if (mode->hdisplay >= 3840 && drm_mode_vrefresh(mode) >= 31)
> 
> Isn't 31 a typo ?

Maybe I should change that to drm_mode_vrefresh(mode) > 30. The chip 
supports 3840x2160-30, but doesn't promise to support anything above that.

> 
>> +        return MODE_CLOCK_HIGH;
>> +
>> +    if (mode->hdisplay > 2000 && !lt9611->dsi1_node)
>>           return MODE_PANEL;
>>       else
>>           return MODE_OK;
> 

-- 
With best wishes
Dmitry