[Freedreno] [PATCH] drm/msm: Initialize mode_config earlier

Mon Jan 23 16:01:45 UTC 2023

On Tue, Jan 17, 2023 at 09:04:39AM +0100, Johan Hovold wrote:
> On Mon, Jan 16, 2023 at 08:51:22PM -0600, Bjorn Andersson wrote:
> > On Fri, Jan 13, 2023 at 10:57:18AM +0200, Dmitry Baryshkov wrote:
> > > On 13/01/2023 06:23, Dmitry Baryshkov wrote:
> > > > On 13/01/2023 06:10, Bjorn Andersson wrote:
> > > > > Invoking drm_bridge_hpd_notify() on a drm_bridge with a HPD-enabled
> > > > > bridge_connector ends up in drm_bridge_connector_hpd_cb() calling
> > > > > drm_kms_helper_hotplug_event(), which assumes that the associated
> > > > > drm_device's mode_config.funcs is a valid pointer.
> > > > > 
> > > > > But in the MSM DisplayPort driver the HPD enablement happens at bind
> > > > > time and mode_config.funcs is initialized late in msm_drm_init(). This
> > > > > means that there's a window for hot plug events to dereference a NULL
> > > > > mode_config.funcs.
> > > > > 
> > > > > Move the assignment of mode_config.funcs before the bind, to avoid this
> > > > > scenario.
> > > > 
> > > > Cam we make DP driver not to report HPD events until the enable_hpd()
> > > > was called? I think this is what was fixed by your internal_hpd
> > > > patchset.
> > > 
> > > Or to express this in another words: I thought that internal_hpd already
> > > deferred enabling hpd event reporting till the time when we need it, didn't
> > > it?
> > > 
> > 
> > I added a WARN_ON(1) in drm_bridge_hpd_enable() to get a sense of when
> > this window of "opportunity" opens up, and here's the callstack:
> > 
> > ------------[ cut here ]------------
> > WARNING: CPU: 6 PID: 99 at drivers/gpu/drm/drm_bridge.c:1260 drm_bridge_hpd_enable+0x48/0x94 [drm]
> > ...
> > Call trace:
> >  drm_bridge_hpd_enable+0x48/0x94 [drm]
> >  drm_bridge_connector_enable_hpd+0x30/0x3c [drm_kms_helper]
> >  drm_kms_helper_poll_enable+0xa4/0x114 [drm_kms_helper]
> >  drm_kms_helper_poll_init+0x6c/0x7c [drm_kms_helper]
> >  msm_drm_bind+0x370/0x628 [msm]
> >  try_to_bring_up_aggregate_device+0x170/0x1bc
> >  __component_add+0xb0/0x168
> >  component_add+0x20/0x2c
> >  dp_display_probe+0x40c/0x468 [msm]
> >  platform_probe+0xb4/0xdc
> >  really_probe+0x13c/0x300
> >  __driver_probe_device+0xc0/0xec
> >  driver_probe_device+0x48/0x204
> >  __device_attach_driver+0x124/0x14c
> >  bus_for_each_drv+0x90/0xdc
> >  __device_attach+0xdc/0x1a8
> >  device_initial_probe+0x20/0x2c
> >  bus_probe_device+0x40/0xa4
> >  deferred_probe_work_func+0x94/0xd0
> >  process_one_work+0x1a8/0x3c0
> >  worker_thread+0x254/0x47c
> >  kthread+0xf8/0x1b8
> >  ret_from_fork+0x10/0x20
> > ---[ end trace 0000000000000000 ]---
> > 
> > As drm_kms_helper_poll_init() is the last thing being called in
> > msm_drm_init() shifting around the mode_config.func assignment would not
> > have any impact.
> > 
> > Perhaps we have shuffled other things around to avoid this bug?  Either
> > way, let's this on hold  until further proof that it's still
> > reproducible.
> 
> As I've mentioned off list, I haven't hit the apparent race I reported
> here:
> 
> 	https://lore.kernel.org/all/Y1efJh11B5UQZ0Tz@hovoldconsulting.com/
> 
> since moving to 6.2. I did hit it with both 6.0 and 6.1-rc2, but it
> could very well be that something has changes that fixes (or hides) the
> issue since.

For unrelated reasons, I tried enabling async probing, and apart from
apparently causing the panel driver to probe defer indefinitely, I also
again hit the WARN_ON() I had added to catch this:

[   13.593235] WARNING: CPU: 0 PID: 125 at drivers/gpu/drm/drm_probe_helper.c:664 drm_kms_helper_hotplug_event+0x48/0x7
0 [drm_kms_helper]
...
[   13.679429] CPU: 0 PID: 125 Comm: kworker/0:3 Not tainted 6.2.0-rc4 #110
[   13.687159] Hardware name: Qualcomm QRD, BIOS 6.0.220110.BOOT.MXF.1.1-00470-MAKENA-1 01/10/2022
[   13.696947] Workqueue: events pmic_glink_altmode_worker [pmic_glink_altmode]
[   13.705044] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   13.713054] pc : drm_kms_helper_hotplug_event+0x48/0x70 [drm_kms_helper]
[   13.720812] lr : drm_kms_helper_hotplug_event+0x18/0x70 [drm_kms_helper]
[   13.728557] sp : ffff800009e33c90
[   13.732779] x29: ffff800009e33c90 x28: ffffad90862eb000 x27: ffff62d2362ee305
[   13.740956] x26: ffffad90862f1ea0 x25: ffffad9086309b50 x24: 0000000000000000
[   13.749125] x23: 0000000000000003 x22: ffff62d0c5dad000 x21: 0000000000000002
[   13.757291] x20: ffff62d0c6d24000 x19: ffff62d0c5dad000 x18: 0000000000000038
[   13.765443] x17: 0000000000000004 x16: 000000000000d323 x15: 0000000000000004
[   13.773585] x14: ffffad9086594208 x13: ffffad90865f50e8 x12: 0000000000000000
[   13.781723] x11: 00000000000400d7 x10: 0000000000000008 x9 : 0000000000000002
[   13.789867] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000097d00
[   13.798013] x5 : ffff62d0c3395000 x4 : ffff62d2362ed750 x3 : 0000000000097e00
[   13.806161] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[   13.814304] Call trace:
[   13.817604]  drm_kms_helper_hotplug_event+0x48/0x70 [drm_kms_helper]
[   13.824959]  drm_bridge_connector_hpd_cb+0xa0/0xc0 [drm_kms_helper]
[   13.832227]  drm_bridge_hpd_notify+0x40/0x60 [drm]
[   13.837993]  pmic_glink_altmode_worker+0xc0/0x150 [pmic_glink_altmode]
[   13.845505]  process_one_work+0x288/0x6c0
[   13.850404]  worker_thread+0x74/0x450
[   13.854948]  kthread+0x118/0x120
[   13.859032]  ret_from_fork+0x10/0x20
[   13.863473] irq event stamp: 7440
[   13.867631] hardirqs last  enabled at (7439): [<ffffad9085b00450>] _raw_spin_unlock_irqrestore+0x80/0x90
[   13.878157] hardirqs last disabled at (7440): [<ffffad9085af33e4>] el1_dbg+0x24/0x90
[   13.886885] softirqs last  enabled at (7308): [<ffffad908514046c>] _stext+0x46c/0x5d8
[   13.895697] softirqs last disabled at (7303): [<ffffad90851467b0>] ____do_softirq+0x10/0x20
[   13.905038] ---[ end trace 0000000000000000 ]---

So the bug still appears to be there (and the MSM DRM driver is fragile
and broken, but we knew that).

Johan