[Freedreno] [PATCH 01/13] drm/msm/dpu: cleanup dpu_kms_hw_init error path

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Jul 7 23:48:52 UTC 2023


On 08/07/2023 02:25, Konrad Dybcio wrote:
> On 7.07.2023 22:37, Dmitry Baryshkov wrote:
>> It was noticed that dpu_kms_hw_init()'s error path contains several
>> labels which point to the same code path. Replace all of them with a
>> single label.
>>
>> Suggested-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> it's the first time I'm seeing this code
> 

It is Suggested-by, not something else. And you pointed it out in 
https://lore.kernel.org/linux-arm-msm/6d598438-f10f-8678-7878-829b8b3ae790@linaro.org/

> Konrad
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 21 +++++++++------------
>>   1 file changed, 9 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index c11b3ab572ab..e7ac02e92f42 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1037,7 +1037,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   	if (!dpu_kms->catalog) {
>>   		DPU_ERROR("device config not known!\n");
>>   		rc = -EINVAL;
>> -		goto power_error;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	/*
>> @@ -1047,13 +1047,13 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   	rc = _dpu_kms_mmu_init(dpu_kms);
>>   	if (rc) {
>>   		DPU_ERROR("dpu_kms_mmu_init failed: %d\n", rc);
>> -		goto power_error;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	rc = dpu_rm_init(&dpu_kms->rm, dpu_kms->catalog, dpu_kms->mmio);
>>   	if (rc) {
>>   		DPU_ERROR("rm init failed: %d\n", rc);
>> -		goto power_error;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	dpu_kms->rm_init = true;
>> @@ -1065,7 +1065,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   		rc = PTR_ERR(dpu_kms->hw_mdp);
>>   		DPU_ERROR("failed to get hw_mdp: %d\n", rc);
>>   		dpu_kms->hw_mdp = NULL;
>> -		goto power_error;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
>> @@ -1076,7 +1076,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   		if (IS_ERR(hw)) {
>>   			rc = PTR_ERR(hw);
>>   			DPU_ERROR("failed to init vbif %d: %d\n", vbif->id, rc);
>> -			goto power_error;
>> +			goto err_pm_put;
>>   		}
>>   
>>   		dpu_kms->hw_vbif[vbif->id] = hw;
>> @@ -1092,7 +1092,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   	rc = dpu_core_perf_init(&dpu_kms->perf, dpu_kms->catalog->perf, max_core_clk_rate);
>>   	if (rc) {
>>   		DPU_ERROR("failed to init perf %d\n", rc);
>> -		goto perf_err;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	dpu_kms->hw_intr = dpu_hw_intr_init(dpu_kms->mmio, dpu_kms->catalog);
>> @@ -1100,7 +1100,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   		rc = PTR_ERR(dpu_kms->hw_intr);
>>   		DPU_ERROR("hw_intr init failed: %d\n", rc);
>>   		dpu_kms->hw_intr = NULL;
>> -		goto hw_intr_init_err;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	dev->mode_config.min_width = 0;
>> @@ -1125,7 +1125,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   	rc = _dpu_kms_drm_obj_init(dpu_kms);
>>   	if (rc) {
>>   		DPU_ERROR("modeset init failed: %d\n", rc);
>> -		goto drm_obj_init_err;
>> +		goto err_pm_put;
>>   	}
>>   
>>   	dpu_vbif_init_memtypes(dpu_kms);
>> @@ -1134,10 +1134,7 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>>   
>>   	return 0;
>>   
>> -drm_obj_init_err:
>> -hw_intr_init_err:
>> -perf_err:
>> -power_error:
>> +err_pm_put:
>>   	pm_runtime_put_sync(&dpu_kms->pdev->dev);
>>   error:
>>   	_dpu_kms_hw_destroy(dpu_kms);

-- 
With best wishes
Dmitry



More information about the Freedreno mailing list